crypto/dpaa_sec: support dynamic logging
authorHemant Agrawal <hemant.agrawal@nxp.com>
Thu, 19 Apr 2018 16:52:36 +0000 (22:22 +0530)
committerPablo de Lara <pablo.de.lara.guarch@intel.com>
Mon, 23 Apr 2018 17:20:10 +0000 (18:20 +0100)
This patch adds the support for dynamic logging in dpaa_sec.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
config/common_base
config/defconfig_arm64-dpaa-linuxapp-gcc
doc/guides/cryptodevs/dpaa_sec.rst
drivers/crypto/dpaa_sec/Makefile
drivers/crypto/dpaa_sec/dpaa_sec.c
drivers/crypto/dpaa_sec/dpaa_sec_log.h

index e57fe3a..7e45412 100644 (file)
@@ -473,9 +473,6 @@ CONFIG_RTE_DPAA2_SEC_PMD_MAX_NB_SESSIONS=2048
 # NXP DPAA caam - crypto driver
 #
 CONFIG_RTE_LIBRTE_PMD_DPAA_SEC=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_RX=n
 CONFIG_RTE_LIBRTE_DPAA_MAX_CRYPTODEV=4
 CONFIG_RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS=2048
 
index 52bfc79..147ea5d 100644 (file)
@@ -21,10 +21,3 @@ CONFIG_RTE_PKTMBUF_HEADROOM=128
 # NXP DPAA Bus
 CONFIG_RTE_LIBRTE_DPAA_DEBUG_DRIVER=n
 CONFIG_RTE_LIBRTE_DPAA_HWDEBUG=n
-
-#
-# FSL DPAA caam - crypto driver
-#
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER=n
-CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_RX=n
index b98f786..2964e83 100644 (file)
@@ -132,15 +132,6 @@ Please note that enabling debugging options may affect system performance.
   By default it is only enabled in defconfig_arm64-dpaa-* config.
   Toggle compilation of the ``librte_pmd_dpaa_sec`` driver.
 
-* ``CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT`` (default ``n``)
-  Toggle display of initialization related driver messages
-
-* ``CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER`` (default ``n``)
-  Toggle display of driver runtime messages
-
-* ``CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_RX`` (default ``n``)
-  Toggle display of receive fast path run-time message
-
 * ``CONFIG_RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS``
   By default it is set as 2048 in defconfig_arm64-dpaa-* config.
   It indicates Number of sessions to create in the session memory pool
@@ -155,3 +146,15 @@ following ``make`` command:
 
    cd <DPDK-source-directory>
    make config T=arm64-dpaa-linuxapp-gcc install
+
+Enabling logs
+-------------
+
+For enabling logs, use the following EAL parameter:
+
+.. code-block:: console
+
+   ./your_crypto_application <EAL args> --log-level=pmd.crypto.dpaa,<level>
+
+Using ``pmd.crypto.dpaa`` as log matching criteria, all Crypto PMD logs can be
+enabled which are lower than logging ``level``.
index fe2c593..9be4470 100644 (file)
@@ -12,13 +12,8 @@ LIB = librte_pmd_dpaa_sec.a
 # build flags
 CFLAGS += -DALLOW_EXPERIMENTAL_API
 CFLAGS += -D _GNU_SOURCE
-ifeq ($(CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT),y)
-CFLAGS += -O0 -g
-CFLAGS += "-Wno-error"
-else
 CFLAGS += -O3
 CFLAGS += $(WERROR_FLAGS)
-endif
 
 CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa
 CFLAGS += -I$(RTE_SDK)/drivers/bus/dpaa/include
index 2dac510..e456fd5 100644 (file)
@@ -1,7 +1,7 @@
 /* SPDX-License-Identifier: BSD-3-Clause
  *
  *   Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
- *   Copyright 2017 NXP
+ *   Copyright 2017-2018 NXP
  *
  */
 
@@ -39,6 +39,8 @@
 
 enum rta_sec_era rta_sec_era;
 
+int dpaa_logtype_sec;
+
 static uint8_t cryptodev_driver_id;
 
 static __thread struct rte_crypto_op **dpaa_sec_ops;
@@ -53,7 +55,7 @@ dpaa_sec_op_ending(struct dpaa_sec_op_ctx *ctx)
        if (!ctx->fd_status) {
                ctx->op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
        } else {
-               PMD_RX_LOG(ERR, "SEC return err: 0x%x", ctx->fd_status);
+               DPAA_SEC_DP_WARN("SEC return err: 0x%x", ctx->fd_status);
                ctx->op->status = RTE_CRYPTO_OP_STATUS_ERROR;
        }
 
@@ -69,7 +71,7 @@ dpaa_sec_alloc_ctx(dpaa_sec_session *ses)
 
        retval = rte_mempool_get(ses->ctx_pool, (void **)(&ctx));
        if (!ctx || retval) {
-               PMD_TX_LOG(ERR, "Alloc sec descriptor failed!");
+               DPAA_SEC_DP_WARN("Alloc sec descriptor failed!");
                return NULL;
        }
        /*
@@ -119,8 +121,8 @@ ern_sec_fq_handler(struct qman_portal *qm __rte_unused,
                   struct qman_fq *fq,
                   const struct qm_mr_entry *msg)
 {
-       RTE_LOG_DP(ERR, PMD, "sec fq %d error, RC = %x, seqnum = %x\n",
-                  fq->fqid, msg->ern.rc, msg->ern.seqnum);
+       DPAA_SEC_DP_ERR("sec fq %d error, RC = %x, seqnum = %x\n",
+                       fq->fqid, msg->ern.rc, msg->ern.seqnum);
 }
 
 /* initialize the queue with dest chan as caam chan so that
@@ -148,11 +150,11 @@ dpaa_sec_init_rx(struct qman_fq *fq_in, rte_iova_t hwdesc,
 
        fq_in->cb.ern  = ern_sec_fq_handler;
 
-       PMD_INIT_LOG(DEBUG, "in-%x out-%x", fq_in->fqid, fqid_out);
+       DPAA_SEC_DEBUG("in-%x out-%x", fq_in->fqid, fqid_out);
 
        ret = qman_init_fq(fq_in, flags, &fq_opts);
        if (unlikely(ret != 0))
-               PMD_INIT_LOG(ERR, "qman_init_fq failed %d", ret);
+               DPAA_SEC_ERR("qman_init_fq failed %d", ret);
 
        return ret;
 }
@@ -211,7 +213,7 @@ dpaa_sec_init_tx(struct qman_fq *fq)
 
        ret = qman_create_fq(0, flags, fq);
        if (unlikely(ret)) {
-               PMD_INIT_LOG(ERR, "qman_create_fq failed");
+               DPAA_SEC_ERR("qman_create_fq failed");
                return ret;
        }
 
@@ -226,7 +228,7 @@ dpaa_sec_init_tx(struct qman_fq *fq)
 
        ret = qman_init_fq(fq, 0, &opts);
        if (unlikely(ret)) {
-               PMD_INIT_LOG(ERR, "unable to init caam source fq!");
+               DPAA_SEC_ERR("unable to init caam source fq!");
                return ret;
        }
 
@@ -318,7 +320,7 @@ caam_auth_alg(dpaa_sec_session *ses, struct alginfo *alginfo_a)
                alginfo_a->algmode = OP_ALG_AAI_HMAC;
                break;
        default:
-               PMD_INIT_LOG(ERR, "unsupported auth alg %u", ses->auth_alg);
+               DPAA_SEC_ERR("unsupported auth alg %u", ses->auth_alg);
        }
 }
 
@@ -347,7 +349,7 @@ caam_cipher_alg(dpaa_sec_session *ses, struct alginfo *alginfo_c)
                alginfo_c->algmode = OP_ALG_AAI_CTR;
                break;
        default:
-               PMD_INIT_LOG(ERR, "unsupported cipher alg %d", ses->cipher_alg);
+               DPAA_SEC_ERR("unsupported cipher alg %d", ses->cipher_alg);
        }
 }
 
@@ -360,7 +362,7 @@ caam_aead_alg(dpaa_sec_session *ses, struct alginfo *alginfo)
                alginfo->algmode = OP_ALG_AAI_GCM;
                break;
        default:
-               PMD_INIT_LOG(ERR, "unsupported AEAD alg %d", ses->aead_alg);
+               DPAA_SEC_ERR("unsupported AEAD alg %d", ses->aead_alg);
        }
 }
 
@@ -384,7 +386,7 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses)
        if (is_cipher_only(ses)) {
                caam_cipher_alg(ses, &alginfo_c);
                if (alginfo_c.algtype == (unsigned int)DPAA_SEC_ALG_UNSUPPORT) {
-                       PMD_TX_LOG(ERR, "not supported cipher alg\n");
+                       DPAA_SEC_ERR("not supported cipher alg");
                        return -ENOTSUP;
                }
 
@@ -402,7 +404,7 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses)
        } else if (is_auth_only(ses)) {
                caam_auth_alg(ses, &alginfo_a);
                if (alginfo_a.algtype == (unsigned int)DPAA_SEC_ALG_UNSUPPORT) {
-                       PMD_TX_LOG(ERR, "not supported auth alg\n");
+                       DPAA_SEC_ERR("not supported auth alg");
                        return -ENOTSUP;
                }
 
@@ -418,7 +420,7 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses)
        } else if (is_aead(ses)) {
                caam_aead_alg(ses, &alginfo);
                if (alginfo.algtype == (unsigned int)DPAA_SEC_ALG_UNSUPPORT) {
-                       PMD_TX_LOG(ERR, "not supported aead alg\n");
+                       DPAA_SEC_ERR("not supported aead alg");
                        return -ENOTSUP;
                }
                alginfo.key = (size_t)ses->aead_key.data;
@@ -441,7 +443,7 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses)
        } else {
                caam_cipher_alg(ses, &alginfo_c);
                if (alginfo_c.algtype == (unsigned int)DPAA_SEC_ALG_UNSUPPORT) {
-                       PMD_TX_LOG(ERR, "not supported cipher alg\n");
+                       DPAA_SEC_ERR("not supported cipher alg");
                        return -ENOTSUP;
                }
 
@@ -452,7 +454,7 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses)
 
                caam_auth_alg(ses, &alginfo_a);
                if (alginfo_a.algtype == (unsigned int)DPAA_SEC_ALG_UNSUPPORT) {
-                       PMD_TX_LOG(ERR, "not supported auth alg\n");
+                       DPAA_SEC_ERR("not supported auth alg");
                        return -ENOTSUP;
                }
 
@@ -469,7 +471,7 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses)
                                       &cdb->sh_desc[2], 2);
 
                if (err < 0) {
-                       PMD_TX_LOG(ERR, "Crypto: Incorrect key lengths");
+                       DPAA_SEC_ERR("Crypto: Incorrect key lengths");
                        return err;
                }
                if (cdb->sh_desc[2] & 1)
@@ -514,7 +516,7 @@ dpaa_sec_prep_cdb(dpaa_sec_session *ses)
        }
 
        if (shared_desc_len < 0) {
-               PMD_TX_LOG(ERR, "error in preparing command block\n");
+               DPAA_SEC_ERR("error in preparing command block");
                return shared_desc_len;
        }
 
@@ -573,7 +575,7 @@ dpaa_sec_deq(struct dpaa_sec_qp *qp, struct rte_crypto_op **ops, int nb_ops)
                if (!ctx->fd_status) {
                        op->status = RTE_CRYPTO_OP_STATUS_SUCCESS;
                } else {
-                       printf("\nSEC return err: 0x%x", ctx->fd_status);
+                       DPAA_SEC_DP_WARN("SEC return err:0x%x", ctx->fd_status);
                        op->status = RTE_CRYPTO_OP_STATUS_ERROR;
                }
                ops[pkts++] = op;
@@ -604,8 +606,8 @@ build_auth_only_sg(struct rte_crypto_op *op, dpaa_sec_session *ses)
                extra_segs = 2;
 
        if ((mbuf->nb_segs + extra_segs) > MAX_SG_ENTRIES) {
-               PMD_TX_LOG(ERR, "Auth: Max sec segs supported is %d\n",
-                                                               MAX_SG_ENTRIES);
+               DPAA_SEC_DP_ERR("Auth: Max sec segs supported is %d",
+                               MAX_SG_ENTRIES);
                return NULL;
        }
        ctx = dpaa_sec_alloc_ctx(ses);
@@ -757,8 +759,8 @@ build_cipher_only_sg(struct rte_crypto_op *op, dpaa_sec_session *ses)
        }
 
        if (req_segs > MAX_SG_ENTRIES) {
-               PMD_TX_LOG(ERR, "Cipher: Max sec segs supported is %d\n",
-                                                               MAX_SG_ENTRIES);
+               DPAA_SEC_DP_ERR("Cipher: Max sec segs supported is %d",
+                               MAX_SG_ENTRIES);
                return NULL;
        }
 
@@ -910,7 +912,7 @@ build_cipher_auth_gcm_sg(struct rte_crypto_op *op, dpaa_sec_session *ses)
                req_segs++;
 
        if (req_segs > MAX_SG_ENTRIES) {
-               PMD_TX_LOG(ERR, "AEAD: Max sec segs supported is %d\n",
+               DPAA_SEC_DP_ERR("AEAD: Max sec segs supported is %d",
                                MAX_SG_ENTRIES);
                return NULL;
        }
@@ -1158,7 +1160,7 @@ build_cipher_auth_sg(struct rte_crypto_op *op, dpaa_sec_session *ses)
        }
 
        if (req_segs > MAX_SG_ENTRIES) {
-               PMD_TX_LOG(ERR, "Cipher-Auth: Max sec segs supported is %d\n",
+               DPAA_SEC_DP_ERR("Cipher-Auth: Max sec segs supported is %d",
                                MAX_SG_ENTRIES);
                return NULL;
        }
@@ -1432,15 +1434,15 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
                                                        op->sym->sec_session);
                                break;
                        default:
-                               PMD_TX_LOG(ERR,
+                               DPAA_SEC_DP_ERR(
                                        "sessionless crypto op not supported");
                                frames_to_send = loop;
                                nb_ops = loop;
                                goto send_pkts;
                        }
                        if (unlikely(!ses->qp || ses->qp != qp)) {
-                               PMD_INIT_LOG(DEBUG, "sess->qp - %p qp %p",
-                                               ses->qp, qp);
+                               DPAA_SEC_DP_ERR("sess->qp - %p qp %p",
+                                            ses->qp, qp);
                                if (dpaa_sec_attach_sess_q(qp, ses)) {
                                        frames_to_send = loop;
                                        nb_ops = loop;
@@ -1463,7 +1465,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
                                } else if (is_proto_ipsec(ses)) {
                                        cf = build_proto(op, ses);
                                } else {
-                                       PMD_TX_LOG(ERR, "not supported sec op");
+                                       DPAA_SEC_DP_ERR("not supported ops");
                                        frames_to_send = loop;
                                        nb_ops = loop;
                                        goto send_pkts;
@@ -1479,7 +1481,7 @@ dpaa_sec_enqueue_burst(void *qp, struct rte_crypto_op **ops,
                                } else if (is_auth_cipher(ses)) {
                                        cf = build_cipher_auth_sg(op, ses);
                                } else {
-                                       PMD_TX_LOG(ERR, "not supported sec op");
+                                       DPAA_SEC_DP_ERR("not supported ops");
                                        frames_to_send = loop;
                                        nb_ops = loop;
                                        goto send_pkts;
@@ -1535,7 +1537,7 @@ dpaa_sec_dequeue_burst(void *qp, struct rte_crypto_op **ops,
        dpaa_qp->rx_pkts += num_rx;
        dpaa_qp->rx_errs += nb_ops - num_rx;
 
-       PMD_RX_LOG(DEBUG, "SEC Received %d Packets\n", num_rx);
+       DPAA_SEC_DP_DEBUG("SEC Received %d Packets\n", num_rx);
 
        return num_rx;
 }
@@ -1550,11 +1552,11 @@ dpaa_sec_queue_pair_release(struct rte_cryptodev *dev,
 
        PMD_INIT_FUNC_TRACE();
 
-       PMD_INIT_LOG(DEBUG, "dev =%p, queue =%d", dev, qp_id);
+       DPAA_SEC_DEBUG("dev =%p, queue =%d", dev, qp_id);
 
        internals = dev->data->dev_private;
        if (qp_id >= internals->max_nb_queue_pairs) {
-               PMD_INIT_LOG(ERR, "Max supported qpid %d",
+               DPAA_SEC_ERR("Max supported qpid %d",
                             internals->max_nb_queue_pairs);
                return -EINVAL;
        }
@@ -1576,12 +1578,11 @@ dpaa_sec_queue_pair_setup(struct rte_cryptodev *dev, uint16_t qp_id,
        struct dpaa_sec_dev_private *internals;
        struct dpaa_sec_qp *qp = NULL;
 
-       PMD_INIT_LOG(DEBUG, "dev =%p, queue =%d, conf =%p",
-                    dev, qp_id, qp_conf);
+       DPAA_SEC_DEBUG("dev =%p, queue =%d, conf =%p", dev, qp_id, qp_conf);
 
        internals = dev->data->dev_private;
        if (qp_id >= internals->max_nb_queue_pairs) {
-               PMD_INIT_LOG(ERR, "Max supported qpid %d",
+               DPAA_SEC_ERR("Max supported qpid %d",
                             internals->max_nb_queue_pairs);
                return -EINVAL;
        }
@@ -1642,7 +1643,7 @@ dpaa_sec_cipher_init(struct rte_cryptodev *dev __rte_unused,
        session->cipher_key.data = rte_zmalloc(NULL, xform->cipher.key.length,
                                               RTE_CACHE_LINE_SIZE);
        if (session->cipher_key.data == NULL && xform->cipher.key.length > 0) {
-               PMD_INIT_LOG(ERR, "No Memory for cipher key\n");
+               DPAA_SEC_ERR("No Memory for cipher key");
                return -ENOMEM;
        }
        session->cipher_key.length = xform->cipher.key.length;
@@ -1664,7 +1665,7 @@ dpaa_sec_auth_init(struct rte_cryptodev *dev __rte_unused,
        session->auth_key.data = rte_zmalloc(NULL, xform->auth.key.length,
                                             RTE_CACHE_LINE_SIZE);
        if (session->auth_key.data == NULL && xform->auth.key.length > 0) {
-               PMD_INIT_LOG(ERR, "No Memory for auth key\n");
+               DPAA_SEC_ERR("No Memory for auth key");
                return -ENOMEM;
        }
        session->auth_key.length = xform->auth.key.length;
@@ -1690,7 +1691,7 @@ dpaa_sec_aead_init(struct rte_cryptodev *dev __rte_unused,
        session->aead_key.data = rte_zmalloc(NULL, xform->aead.key.length,
                                             RTE_CACHE_LINE_SIZE);
        if (session->aead_key.data == NULL && xform->aead.key.length > 0) {
-               PMD_INIT_LOG(ERR, "No Memory for aead key\n");
+               DPAA_SEC_ERR("No Memory for aead key\n");
                return -ENOMEM;
        }
        session->aead_key.length = xform->aead.key.length;
@@ -1715,7 +1716,7 @@ dpaa_sec_attach_rxq(struct dpaa_sec_dev_private *qi)
                        return &qi->inq[i];
                }
        }
-       PMD_DRV_LOG(ERR, "All ses session in use %x", qi->max_nb_sessions);
+       DPAA_SEC_WARN("All ses session in use %x", qi->max_nb_sessions);
 
        return NULL;
 }
@@ -1744,20 +1745,20 @@ dpaa_sec_attach_sess_q(struct dpaa_sec_qp *qp, dpaa_sec_session *sess)
        sess->qp = qp;
        ret = dpaa_sec_prep_cdb(sess);
        if (ret) {
-               PMD_DRV_LOG(ERR, "Unable to prepare sec cdb");
+               DPAA_SEC_ERR("Unable to prepare sec cdb");
                return -1;
        }
        if (unlikely(!RTE_PER_LCORE(dpaa_io))) {
                ret = rte_dpaa_portal_init((void *)0);
                if (ret) {
-                       PMD_DRV_LOG(ERR, "Failure in affining portal");
+                       DPAA_SEC_ERR("Failure in affining portal");
                        return ret;
                }
        }
        ret = dpaa_sec_init_rx(sess->inq, dpaa_mem_vtop(&sess->cdb),
                               qman_fq_fqid(&qp->outq));
        if (ret)
-               PMD_DRV_LOG(ERR, "Unable to init sec queue");
+               DPAA_SEC_ERR("Unable to init sec queue");
 
        return ret;
 }
@@ -1800,7 +1801,7 @@ dpaa_sec_set_session_parameters(struct rte_cryptodev *dev,
        PMD_INIT_FUNC_TRACE();
 
        if (unlikely(sess == NULL)) {
-               RTE_LOG(ERR, PMD, "invalid session struct\n");
+               DPAA_SEC_ERR("invalid session struct");
                return -EINVAL;
        }
 
@@ -1825,7 +1826,7 @@ dpaa_sec_set_session_parameters(struct rte_cryptodev *dev,
                        dpaa_sec_cipher_init(dev, xform, session);
                        dpaa_sec_auth_init(dev, xform->next, session);
                } else {
-                       PMD_DRV_LOG(ERR, "Not supported: Auth then Cipher");
+                       DPAA_SEC_ERR("Not supported: Auth then Cipher");
                        return -EINVAL;
                }
 
@@ -1836,7 +1837,7 @@ dpaa_sec_set_session_parameters(struct rte_cryptodev *dev,
                        dpaa_sec_auth_init(dev, xform, session);
                        dpaa_sec_cipher_init(dev, xform->next, session);
                } else {
-                       PMD_DRV_LOG(ERR, "Not supported: Auth then Cipher");
+                       DPAA_SEC_ERR("Not supported: Auth then Cipher");
                        return -EINVAL;
                }
 
@@ -1846,13 +1847,13 @@ dpaa_sec_set_session_parameters(struct rte_cryptodev *dev,
                dpaa_sec_aead_init(dev, xform, session);
 
        } else {
-               PMD_DRV_LOG(ERR, "Invalid crypto type");
+               DPAA_SEC_ERR("Invalid crypto type");
                return -EINVAL;
        }
        session->ctx_pool = internals->ctx_pool;
        session->inq = dpaa_sec_attach_rxq(internals);
        if (session->inq == NULL) {
-               PMD_DRV_LOG(ERR, "unable to attach sec queue");
+               DPAA_SEC_ERR("unable to attach sec queue");
                goto err1;
        }
 
@@ -1878,15 +1879,13 @@ dpaa_sec_session_configure(struct rte_cryptodev *dev,
        PMD_INIT_FUNC_TRACE();
 
        if (rte_mempool_get(mempool, &sess_private_data)) {
-               CDEV_LOG_ERR(
-                       "Couldn't get object from session mempool");
+               DPAA_SEC_ERR("Couldn't get object from session mempool");
                return -ENOMEM;
        }
 
        ret = dpaa_sec_set_session_parameters(dev, xform, sess_private_data);
        if (ret != 0) {
-               PMD_DRV_LOG(ERR, "DPAA PMD: failed to configure "
-                               "session parameters");
+               DPAA_SEC_ERR("failed to configure session parameters");
 
                /* Return session to mempool */
                rte_mempool_put(mempool, sess_private_data);
@@ -1952,7 +1951,7 @@ dpaa_sec_set_ipsec_session(__rte_unused struct rte_cryptodev *dev,
                                               RTE_CACHE_LINE_SIZE);
        if (session->cipher_key.data == NULL &&
                        cipher_xform->key.length > 0) {
-               RTE_LOG(ERR, PMD, "No Memory for cipher key\n");
+               DPAA_SEC_ERR("No Memory for cipher key");
                return -ENOMEM;
        }
 
@@ -1962,7 +1961,7 @@ dpaa_sec_set_ipsec_session(__rte_unused struct rte_cryptodev *dev,
                                        RTE_CACHE_LINE_SIZE);
        if (session->auth_key.data == NULL &&
                        auth_xform->key.length > 0) {
-               RTE_LOG(ERR, PMD, "No Memory for auth key\n");
+               DPAA_SEC_ERR("No Memory for auth key");
                rte_free(session->cipher_key.data);
                return -ENOMEM;
        }
@@ -2007,11 +2006,11 @@ dpaa_sec_set_ipsec_session(__rte_unused struct rte_cryptodev *dev,
        case RTE_CRYPTO_AUTH_KASUMI_F9:
        case RTE_CRYPTO_AUTH_AES_CBC_MAC:
        case RTE_CRYPTO_AUTH_ZUC_EIA3:
-               RTE_LOG(ERR, PMD, "Crypto: Unsupported auth alg %u\n",
+               DPAA_SEC_ERR("Crypto: Unsupported auth alg %u",
                        auth_xform->algo);
                goto out;
        default:
-               RTE_LOG(ERR, PMD, "Crypto: Undefined Auth specified %u\n",
+               DPAA_SEC_ERR("Crypto: Undefined Auth specified %u",
                        auth_xform->algo);
                goto out;
        }
@@ -2031,11 +2030,11 @@ dpaa_sec_set_ipsec_session(__rte_unused struct rte_cryptodev *dev,
        case RTE_CRYPTO_CIPHER_3DES_ECB:
        case RTE_CRYPTO_CIPHER_AES_ECB:
        case RTE_CRYPTO_CIPHER_KASUMI_F8:
-               RTE_LOG(ERR, PMD, "Crypto: Unsupported Cipher alg %u\n",
+               DPAA_SEC_ERR("Crypto: Unsupported Cipher alg %u",
                        cipher_xform->algo);
                goto out;
        default:
-               RTE_LOG(ERR, PMD, "Crypto: Undefined Cipher specified %u\n",
+               DPAA_SEC_ERR("Crypto: Undefined Cipher specified %u",
                        cipher_xform->algo);
                goto out;
        }
@@ -2080,7 +2079,7 @@ dpaa_sec_set_ipsec_session(__rte_unused struct rte_cryptodev *dev,
        session->ctx_pool = internals->ctx_pool;
        session->inq = dpaa_sec_attach_rxq(internals);
        if (session->inq == NULL) {
-               PMD_DRV_LOG(ERR, "unable to attach sec queue");
+               DPAA_SEC_ERR("unable to attach sec queue");
                goto out;
        }
 
@@ -2104,8 +2103,7 @@ dpaa_sec_security_session_create(void *dev,
        int ret;
 
        if (rte_mempool_get(mempool, &sess_private_data)) {
-               CDEV_LOG_ERR(
-                       "Couldn't get object from session mempool");
+               DPAA_SEC_ERR("Couldn't get object from session mempool");
                return -ENOMEM;
        }
 
@@ -2120,9 +2118,7 @@ dpaa_sec_security_session_create(void *dev,
                return -EINVAL;
        }
        if (ret != 0) {
-               PMD_DRV_LOG(ERR,
-                       "DPAA2 PMD: failed to configure session parameters");
-
+               DPAA_SEC_ERR("failed to configure session parameters");
                /* Return session to mempool */
                rte_mempool_put(mempool, sess_private_data);
                return ret;
@@ -2176,12 +2172,12 @@ dpaa_sec_dev_configure(struct rte_cryptodev *dev,
                                                        NULL, NULL, NULL, NULL,
                                                        SOCKET_ID_ANY, 0);
                if (!internals->ctx_pool) {
-                       RTE_LOG(ERR, PMD, "%s create failed\n", str);
+                       DPAA_SEC_ERR("%s create failed\n", str);
                        return -ENOMEM;
                }
        } else
-               RTE_LOG(INFO, PMD, "mempool already created for dev_id : %d\n",
-                       dev->data->dev_id);
+               DPAA_SEC_INFO("mempool already created for dev_id : %d",
+                               dev->data->dev_id);
 
        return 0;
 }
@@ -2283,8 +2279,8 @@ dpaa_sec_uninit(struct rte_cryptodev *dev)
        rte_mempool_free(internals->ctx_pool);
        rte_free(internals);
 
-       PMD_INIT_LOG(INFO, "Closing DPAA_SEC device %s on numa socket %u\n",
-                    dev->data->name, rte_socket_id());
+       DPAA_SEC_INFO("Closing DPAA_SEC device %s on numa socket %u",
+                     dev->data->name, rte_socket_id());
 
        return 0;
 }
@@ -2321,7 +2317,7 @@ dpaa_sec_dev_init(struct rte_cryptodev *cryptodev)
         * RX function
         */
        if (rte_eal_process_type() != RTE_PROC_PRIMARY) {
-               PMD_INIT_LOG(DEBUG, "Device already init by primary process");
+               DPAA_SEC_WARN("Device already init by primary process");
                return 0;
        }
 
@@ -2340,7 +2336,7 @@ dpaa_sec_dev_init(struct rte_cryptodev *cryptodev)
                qp = &internals->qps[i];
                ret = dpaa_sec_init_tx(&qp->outq);
                if (ret) {
-                       PMD_INIT_LOG(ERR, "config tx of queue pair  %d", i);
+                       DPAA_SEC_ERR("config tx of queue pair  %d", i);
                        goto init_error;
                }
        }
@@ -2351,16 +2347,16 @@ dpaa_sec_dev_init(struct rte_cryptodev *cryptodev)
                /* create rx qman fq for sessions*/
                ret = qman_create_fq(0, flags, &internals->inq[i]);
                if (unlikely(ret != 0)) {
-                       PMD_INIT_LOG(ERR, "sec qman_create_fq failed");
+                       DPAA_SEC_ERR("sec qman_create_fq failed");
                        goto init_error;
                }
        }
 
-       PMD_INIT_LOG(DEBUG, "driver %s: created\n", cryptodev->data->name);
+       RTE_LOG(INFO, PMD, "%s cryptodev init\n", cryptodev->data->name);
        return 0;
 
 init_error:
-       PMD_INIT_LOG(ERR, "driver %s: create failed\n", cryptodev->data->name);
+       DPAA_SEC_ERR("driver %s: create failed\n", cryptodev->data->name);
 
        dpaa_sec_uninit(cryptodev);
        return -EFAULT;
@@ -2461,3 +2457,12 @@ static struct cryptodev_driver dpaa_sec_crypto_drv;
 RTE_PMD_REGISTER_DPAA(CRYPTODEV_NAME_DPAA_SEC_PMD, rte_dpaa_sec_driver);
 RTE_PMD_REGISTER_CRYPTO_DRIVER(dpaa_sec_crypto_drv, rte_dpaa_sec_driver.driver,
                cryptodev_driver_id);
+
+RTE_INIT(dpaa_sec_init_log);
+static void
+dpaa_sec_init_log(void)
+{
+       dpaa_logtype_sec = rte_log_register("pmd.crypto.dpaa");
+       if (dpaa_logtype_sec >= 0)
+               rte_log_set_level(dpaa_logtype_sec, RTE_LOG_NOTICE);
+}
index 992a79f..9784fcb 100644 (file)
@@ -1,44 +1,43 @@
 /* SPDX-License-Identifier: BSD-3-Clause
  *
  *   Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
- *   Copyright NXP 2017.
+ *   Copyright 2017-2018 NXP
  *
  */
 
 #ifndef _DPAA_SEC_LOG_H_
 #define _DPAA_SEC_LOG_H_
 
-#define PMD_INIT_LOG(level, fmt, args...) \
-       RTE_LOG(level, PMD, "%s(): " fmt "\n", __func__, ##args)
-
-#ifdef RTE_LIBRTE_DPAA_SEC_DEBUG_INIT
-#define PMD_INIT_FUNC_TRACE() PMD_INIT_LOG(DEBUG, " >>")
-#else
-#define PMD_INIT_FUNC_TRACE() do { } while (0)
-#endif
-
-#ifdef RTE_LIBRTE_DPAA_SEC_DEBUG_RX
-#define PMD_RX_LOG(level, fmt, args...) \
-       RTE_LOG_DP(level, PMD, "%s(): " fmt "\n", __func__, ## args)
-#else
-#define PMD_RX_LOG(level, fmt, args...) do { } while (0)
-#endif
-
-#ifdef RTE_LIBRTE_DPAA_SEC_DEBUG_TX
-#define PMD_TX_LOG(level, fmt, args...) \
-       RTE_LOG_DP(level, PMD, "%s(): " fmt "\n", __func__, ## args)
-#else
-#define PMD_TX_LOG(level, fmt, args...) do { } while (0)
-#endif
-
-#ifdef RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER
-#define PMD_DRV_LOG_RAW(level, fmt, args...) \
-       RTE_LOG(level, PMD, "%s(): " fmt, __func__, ## args)
-#else
-#define PMD_DRV_LOG_RAW(level, fmt, args...) do { } while (0)
-#endif
-
-#define PMD_DRV_LOG(level, fmt, args...) \
-       PMD_DRV_LOG_RAW(level, fmt "\n", ## args)
+extern int dpaa_logtype_sec;
+
+#define DPAA_SEC_LOG(level, fmt, args...) \
+       rte_log(RTE_LOG_ ## level, dpaa_logtype_sec, "dpaa_sec: " \
+               fmt "\n", ##args)
+
+#define DPAA_SEC_DEBUG(fmt, args...) \
+       rte_log(RTE_LOG_DEBUG, dpaa_logtype_sec, "dpaa_sec: %s(): " \
+               fmt "\n", __func__, ##args)
+
+#define PMD_INIT_FUNC_TRACE() DPAA_SEC_LOG(DEBUG, " >>")
+
+#define DPAA_SEC_INFO(fmt, args...) \
+       DPAA_SEC_LOG(INFO, fmt, ## args)
+#define DPAA_SEC_ERR(fmt, args...) \
+       DPAA_SEC_LOG(ERR, fmt, ## args)
+#define DPAA_SEC_WARN(fmt, args...) \
+       DPAA_SEC_LOG(WARNING, fmt, ## args)
+
+/* DP Logs, toggled out at compile time if level lower than current level */
+#define DPAA_SEC_DP_LOG(level, fmt, args...) \
+       RTE_LOG_DP(level, PMD, fmt, ## args)
+
+#define DPAA_SEC_DP_DEBUG(fmt, args...) \
+       DPAA_SEC_DP_LOG(DEBUG, fmt, ## args)
+#define DPAA_SEC_DP_INFO(fmt, args...) \
+       DPAA_SEC_DP_LOG(INFO, fmt, ## args)
+#define DPAA_SEC_DP_WARN(fmt, args...) \
+       DPAA_SEC_DP_LOG(WARNING, fmt, ## args)
+#define DPAA_SEC_DP_ERR(fmt, args...) \
+       DPAA_SEC_DP_LOG(ERR, fmt, ## args)
 
 #endif /* _DPAA_SEC_LOG_H_ */