regex/mlx5: support combined rule file
authorOri Kam <orika@nvidia.com>
Thu, 7 Jan 2021 16:57:08 +0000 (18:57 +0200)
committerThomas Monjalon <thomas@monjalon.net>
Tue, 19 Jan 2021 17:04:15 +0000 (18:04 +0100)
The rof file holds programming instructions for
a given HW version.
In order to support future generation of HW it
was decided that the rof file will hold number
of rule configurations, and the driver will use
the one that matches the HW version.

In current code we force sync after each write block.
This has impact on performance.

The solution is to move the sync to the end of the
entire programming sequence.

Signed-off-by: Ori Kam <orika@nvidia.com>
drivers/regex/mlx5/mlx5_regex.c
drivers/regex/mlx5/mlx5_regex.h
drivers/regex/mlx5/mlx5_rxp.c
drivers/regex/mlx5/mlx5_rxp_csrs.h

index c0d6331..f1fd911 100644 (file)
@@ -119,6 +119,7 @@ mlx5_regex_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
        struct mlx5_hca_attr attr;
        char name[RTE_REGEXDEV_NAME_MAX_LEN];
        int ret;
+       uint32_t val;
 
        ibv = mlx5_regex_get_ib_device_match(&pci_dev->addr);
        if (!ibv) {
@@ -161,6 +162,14 @@ mlx5_regex_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
        }
        priv->ctx = ctx;
        priv->nb_engines = 2; /* attr.regexp_num_of_engines */
+       ret = mlx5_devx_regex_register_read(priv->ctx, 0,
+                                           MLX5_RXP_CSR_IDENTIFIER, &val);
+       if (ret) {
+               DRV_LOG(ERR, "CSR read failed!");
+               return -1;
+       }
+       if (val == MLX5_RXP_BF2_IDENTIFIER)
+               priv->is_bf2 = 1;
        /* Default RXP programming mode to Shared. */
        priv->prog_mode = MLX5_RXP_SHARED_PROG_MODE;
        mlx5_regex_get_name(name, pci_dev);
index 7e1b2a9..484819c 100644 (file)
@@ -69,6 +69,7 @@ struct mlx5_regex_priv {
        struct mlx5dv_devx_uar *uar; /* UAR object. */
        struct ibv_pd *pd;
        struct mlx5_mr_share_cache mr_scache; /* Global shared MR cache. */
+       uint8_t is_bf2; /* The device is BF2 device. */
 };
 
 /* mlx5_regex.c */
index bd721f0..4449aa8 100644 (file)
@@ -8,6 +8,7 @@
 #include <rte_regexdev.h>
 #include <rte_regexdev_core.h>
 #include <rte_regexdev_driver.h>
+#include <sys/mman.h>
 
 #include <mlx5_glue.h>
 #include <mlx5_devx_cmds.h>
@@ -24,6 +25,8 @@
 #define MLX5_REGEX_MAX_RULES_PER_GROUP UINT32_MAX
 #define MLX5_REGEX_MAX_GROUPS MLX5_RXP_MAX_SUBSETS
 
+#define MLX5_REGEX_RXP_ROF2_LINE_LEN 34
+
 /* Private Declarations */
 static int
 rxp_poll_csr_for_value(struct ibv_context *ctx, uint32_t *value,
@@ -36,30 +39,15 @@ mlnx_resume_database(struct mlx5_regex_priv *priv, uint8_t id);
 static int
 mlnx_update_database(struct mlx5_regex_priv *priv, uint8_t id);
 static int
-program_rxp_rules(struct mlx5_regex_priv *priv,
-                 struct mlx5_rxp_ctl_rules_pgm *rules, uint8_t id);
+program_rxp_rules(struct mlx5_regex_priv *priv, const char *buf, uint32_t len,
+                 uint8_t id);
 static int
 rxp_init_eng(struct mlx5_regex_priv *priv, uint8_t id);
 static int
-write_private_rules(struct mlx5_regex_priv *priv,
-                   struct mlx5_rxp_ctl_rules_pgm *rules,
-                   uint8_t id);
-static int
-write_shared_rules(struct mlx5_regex_priv *priv,
-                  struct mlx5_rxp_ctl_rules_pgm *rules, uint32_t count,
-                  uint8_t db_to_program);
-static int
 rxp_db_setup(struct mlx5_regex_priv *priv);
 static void
 rxp_dump_csrs(struct ibv_context *ctx, uint8_t id);
 static int
-rxp_write_rules_via_cp(struct ibv_context *ctx,
-                      struct mlx5_rxp_rof_entry *rules,
-                      int count, uint8_t id);
-static int
-rxp_flush_rules(struct ibv_context *ctx, struct mlx5_rxp_rof_entry *rules,
-               int count, uint8_t id);
-static int
 rxp_start_engine(struct ibv_context *ctx, uint8_t id);
 static int
 rxp_stop_engine(struct ibv_context *ctx, uint8_t id);
@@ -123,110 +111,6 @@ mlx5_regex_info_get(struct rte_regexdev *dev __rte_unused,
        return 0;
 }
 
-/**
- * Actual writing of RXP instructions to RXP via CSRs.
- */
-static int
-rxp_write_rules_via_cp(struct ibv_context *ctx,
-                      struct mlx5_rxp_rof_entry *rules,
-                      int count, uint8_t id)
-{
-       int i, ret = 0;
-       uint32_t tmp;
-
-       for (i = 0; i < count; i++) {
-               tmp = (uint32_t)rules[i].value;
-               ret |= mlx5_devx_regex_register_write(ctx, id,
-                                                     MLX5_RXP_RTRU_CSR_DATA_0,
-                                                     tmp);
-               tmp = (uint32_t)(rules[i].value >> 32);
-               ret |= mlx5_devx_regex_register_write(ctx, id,
-                                                     MLX5_RXP_RTRU_CSR_DATA_0 +
-                                                     MLX5_RXP_CSR_WIDTH, tmp);
-               tmp = rules[i].addr;
-               ret |= mlx5_devx_regex_register_write(ctx, id,
-                                                     MLX5_RXP_RTRU_CSR_ADDR,
-                                                     tmp);
-               if (ret) {
-                       DRV_LOG(ERR, "Failed to copy instructions to RXP.");
-                       return -1;
-               }
-       }
-       DRV_LOG(DEBUG, "Written %d instructions", count);
-       return 0;
-}
-
-static int
-rxp_flush_rules(struct ibv_context *ctx, struct mlx5_rxp_rof_entry *rules,
-               int count, uint8_t id)
-{
-       uint32_t val, fifo_depth;
-       int ret;
-
-       ret = rxp_write_rules_via_cp(ctx, rules, count, id);
-       if (ret < 0) {
-               DRV_LOG(ERR, "Failed to write rules via CSRs.");
-               return -1;
-       }
-       ret = mlx5_devx_regex_register_read(ctx, id,
-                                           MLX5_RXP_RTRU_CSR_CAPABILITY,
-                                           &fifo_depth);
-       if (ret) {
-               DRV_LOG(ERR, "CSR read failed!");
-               return -1;
-       }
-       ret = rxp_poll_csr_for_value(ctx, &val, MLX5_RXP_RTRU_CSR_FIFO_STAT,
-                                    count, ~0,
-                                    MLX5_RXP_POLL_CSR_FOR_VALUE_TIMEOUT, id);
-       if (ret < 0) {
-               if (ret == -EBUSY)
-                       DRV_LOG(ERR, "Rules not rx by RXP: credit: %d, depth:"
-                               " %d", val, fifo_depth);
-               else
-                       DRV_LOG(ERR, "CSR poll failed, can't read value!");
-               return ret;
-       }
-       DRV_LOG(DEBUG, "RTRU FIFO depth: 0x%x", fifo_depth);
-       ret = mlx5_devx_regex_register_read(ctx, id, MLX5_RXP_RTRU_CSR_CTRL,
-                                           &val);
-       if (ret) {
-               DRV_LOG(ERR, "CSR read failed!");
-               return -1;
-       }
-       val |= MLX5_RXP_RTRU_CSR_CTRL_GO;
-       ret = mlx5_devx_regex_register_write(ctx, id, MLX5_RXP_RTRU_CSR_CTRL,
-                                            val);
-       if (ret) {
-               DRV_LOG(ERR, "CSR write failed!");
-               return -1;
-       }
-       ret = rxp_poll_csr_for_value(ctx, &val, MLX5_RXP_RTRU_CSR_STATUS,
-                                    MLX5_RXP_RTRU_CSR_STATUS_UPDATE_DONE,
-                                    MLX5_RXP_RTRU_CSR_STATUS_UPDATE_DONE,
-                                    MLX5_RXP_POLL_CSR_FOR_VALUE_TIMEOUT, id);
-       if (ret < 0) {
-               if (ret == -EBUSY)
-                       DRV_LOG(ERR, "Rules update timeout: 0x%08X", val);
-               else
-                       DRV_LOG(ERR, "CSR poll failed, can't read value!");
-               return ret;
-       }
-       if (mlx5_devx_regex_register_read(ctx, id, MLX5_RXP_RTRU_CSR_CTRL,
-                                         &val)) {
-               DRV_LOG(ERR, "CSR read failed!");
-               return -1;
-       }
-       val &= ~(MLX5_RXP_RTRU_CSR_CTRL_GO);
-       if (mlx5_devx_regex_register_write(ctx, id, MLX5_RXP_RTRU_CSR_CTRL,
-                                          val)) {
-               DRV_LOG(ERR, "CSR write failed!");
-               return -1;
-       }
-
-       DRV_LOG(DEBUG, "RXP Flush rules finished.");
-       return 0;
-}
-
 static int
 rxp_poll_csr_for_value(struct ibv_context *ctx, uint32_t *value,
                       uint32_t address, uint32_t expected_value,
@@ -278,13 +162,14 @@ rxp_stop_engine(struct ibv_context *ctx, uint8_t id)
 }
 
 static int
-rxp_init_rtru(struct ibv_context *ctx, uint8_t id, uint32_t init_bits)
+rxp_init_rtru(struct mlx5_regex_priv *priv, uint8_t id, uint32_t init_bits)
 {
        uint32_t ctrl_value;
        uint32_t poll_value;
        uint32_t expected_value;
        uint32_t expected_mask;
-       int ret;
+       struct ibv_context *ctx = priv->ctx;
+       int ret = 0;
 
        /* Read the rtru ctrl CSR. */
        ret = mlx5_devx_regex_register_read(ctx, id, MLX5_RXP_RTRU_CSR_CTRL,
@@ -317,13 +202,15 @@ rxp_init_rtru(struct ibv_context *ctx, uint8_t id, uint32_t init_bits)
        /* Check that the following bits are set in the RTRU_CSR. */
        if (init_bits == MLX5_RXP_RTRU_CSR_CTRL_INIT_MODE_L1_L2) {
                /* Must be incremental mode */
-               expected_value = MLX5_RXP_RTRU_CSR_STATUS_L1C_INIT_DONE |
-                       MLX5_RXP_RTRU_CSR_STATUS_L2C_INIT_DONE;
+               expected_value = MLX5_RXP_RTRU_CSR_STATUS_L1C_INIT_DONE;
        } else {
                expected_value = MLX5_RXP_RTRU_CSR_STATUS_IM_INIT_DONE |
-                       MLX5_RXP_RTRU_CSR_STATUS_L1C_INIT_DONE |
-                       MLX5_RXP_RTRU_CSR_STATUS_L2C_INIT_DONE;
+                       MLX5_RXP_RTRU_CSR_STATUS_L1C_INIT_DONE;
        }
+       if (priv->is_bf2)
+               expected_value |= MLX5_RXP_RTRU_CSR_STATUS_L2C_INIT_DONE;
+
+
        expected_mask = expected_value;
        ret = rxp_poll_csr_for_value(ctx, &poll_value,
                                     MLX5_RXP_RTRU_CSR_STATUS,
@@ -340,69 +227,278 @@ rxp_init_rtru(struct ibv_context *ctx, uint8_t id, uint32_t init_bits)
 }
 
 static int
-rxp_parse_rof(const char *buf, uint32_t len,
-             struct mlx5_rxp_ctl_rules_pgm **rules)
+rxp_parse_line(char *line, uint32_t *type, uint32_t *address, uint64_t *value)
+{
+       char *cur_pos;
+
+       if (*line == '\0' || *line == '#')
+               return  1;
+       *type = strtoul(line, &cur_pos, 10);
+       if (*cur_pos != ',' && *cur_pos != '\0')
+               return -1;
+       *address = strtoul(cur_pos+1, &cur_pos, 16);
+       if (*cur_pos != ',' && *cur_pos != '\0')
+               return -1;
+       *value = strtoul(cur_pos+1, &cur_pos, 16);
+       if (*cur_pos != ',' && *cur_pos != '\0')
+               return -1;
+       return 0;
+}
+
+static uint32_t
+rxp_get_reg_address(uint32_t address)
+{
+       uint32_t block;
+       uint32_t reg;
+
+       block = (address >> 16) & 0xFFFF;
+       if (block == 0)
+               reg = MLX5_RXP_CSR_BASE_ADDRESS;
+       else if (block == 1)
+               reg = MLX5_RXP_RTRU_CSR_BASE_ADDRESS;
+       else {
+               DRV_LOG(ERR, "Invalid ROF register 0x%08X!", address);
+                       return UINT32_MAX;
+       }
+       reg += (address & 0xFFFF) * MLX5_RXP_CSR_WIDTH;
+       return reg;
+}
+
+#define MLX5_RXP_NUM_LINES_PER_BLOCK 8
+
+static int
+rxp_program_rof(struct mlx5_regex_priv *priv, const char *buf, uint32_t len,
+               uint8_t id)
 {
        static const char del[] = "\n\r";
        char *line;
        char *tmp;
-       char *cur_pos;
-       uint32_t lines = 0;
-       uint32_t entries;
-       struct mlx5_rxp_rof_entry *curentry;
+       uint32_t type = 0;
+       uint32_t address;
+       uint64_t val;
+       uint32_t reg_val;
+       int ret;
+       int skip = -1;
+       int last = 0;
+       uint32_t temp;
+       uint32_t tmp_addr;
+       uint32_t rof_rule_addr;
+       uint64_t tmp_write_swap[4];
+       struct mlx5_rxp_rof_entry rules[8];
+       int i;
+       int db_free;
+       int j;
 
        tmp = rte_malloc("", len, 0);
        if (!tmp)
                return -ENOMEM;
        memcpy(tmp, buf, len);
-       line = strtok(tmp, del);
-       while (line) {
-               if (line[0] != '#' && line[0] != '\0')
-                       lines++;
-               line = strtok(NULL, del);
-       }
-       *rules = rte_malloc("", lines * sizeof(*curentry) + sizeof(**rules), 0);
-       if (!(*rules)) {
+       db_free = mlnx_update_database(priv, id);
+       if (db_free < 0) {
+               DRV_LOG(ERR, "Failed to setup db memory!");
                rte_free(tmp);
-               return -ENOMEM;
+               return db_free;
        }
-       memset(*rules, 0, lines * sizeof(curentry) + sizeof(**rules));
-       curentry = (*rules)->rules;
-       (*rules)->hdr.cmd = MLX5_RXP_CTL_RULES_PGM;
-       entries = 0;
-       memcpy(tmp, buf, len);
-       line = strtok(tmp, del);
-       while (line) {
-               if (line[0] == '#' || line[0] == '\0') {
-                       line = strtok(NULL, del);
+       for (line = strtok(tmp, del), j = 0; line; line = strtok(NULL, del),
+            j++, last = type) {
+               ret = rxp_parse_line(line, &type, &address, &val);
+               if (ret != 0) {
+                       if (ret < 0)
+                               goto parse_error;
                        continue;
                }
-               curentry->type = strtoul(line, &cur_pos, 10);
-               if (cur_pos == line || cur_pos[0] != ',')
-                       goto parse_error;
-               cur_pos++;
-               curentry->addr = strtoul(cur_pos, &cur_pos, 16);
-               if (cur_pos[0] != ',')
-                       goto parse_error;
-               cur_pos++;
-               curentry->value = strtoull(cur_pos, &cur_pos, 16);
-               if (cur_pos[0] != '\0' && cur_pos[0] != '\n')
-                       goto parse_error;
-               curentry++;
-               entries++;
-               if (entries > lines)
-                       goto parse_error;
-               line = strtok(NULL, del);
-       }
-       (*rules)->count = entries;
-       (*rules)->hdr.len = entries * sizeof(*curentry) + sizeof(**rules);
+               switch (type) {
+               case MLX5_RXP_ROF_ENTRY_EQ:
+                       if (skip == 0 && address == 0)
+                               skip = 1;
+                       tmp_addr = rxp_get_reg_address(address);
+                       if (tmp_addr == UINT32_MAX)
+                               goto parse_error;
+                       ret = mlx5_devx_regex_register_read(priv->ctx, id,
+                                                           tmp_addr, &reg_val);
+                       if (ret)
+                               goto parse_error;
+                       if (skip == -1 && address == 0) {
+                               if (val == reg_val) {
+                                       skip = 0;
+                                       continue;
+                               }
+                       } else if (skip == 0) {
+                               if (val != reg_val) {
+                                       DRV_LOG(ERR,
+                                               "got %08X expected == %" PRIx64,
+                                               reg_val, val);
+                                       goto parse_error;
+                               }
+                       }
+                       break;
+               case MLX5_RXP_ROF_ENTRY_GTE:
+                       if (skip == 0 && address == 0)
+                               skip = 1;
+                       tmp_addr = rxp_get_reg_address(address);
+                       if (tmp_addr == UINT32_MAX)
+                               goto parse_error;
+                       ret = mlx5_devx_regex_register_read(priv->ctx, id,
+                                                           tmp_addr, &reg_val);
+                       if (ret)
+                               goto parse_error;
+                       if (skip == -1 && address == 0) {
+                               if (reg_val >= val) {
+                                       skip = 0;
+                                       continue;
+                               }
+                       } else if (skip == 0) {
+                               if (reg_val < val) {
+                                       DRV_LOG(ERR,
+                                               "got %08X expected >= %" PRIx64,
+                                               reg_val, val);
+                                       goto parse_error;
+                               }
+                       }
+                       break;
+               case MLX5_RXP_ROF_ENTRY_LTE:
+                       tmp_addr = rxp_get_reg_address(address);
+                       if (tmp_addr == UINT32_MAX)
+                               goto parse_error;
+                       ret = mlx5_devx_regex_register_read(priv->ctx, id,
+                                                           tmp_addr, &reg_val);
+                       if (ret)
+                               goto parse_error;
+                       if (skip == 0 && address == 0 &&
+                           last != MLX5_RXP_ROF_ENTRY_GTE) {
+                               skip = 1;
+                       } else if (skip == 0 && address == 0 &&
+                                  last == MLX5_RXP_ROF_ENTRY_GTE) {
+                               if (reg_val > val)
+                                       skip = -1;
+                               continue;
+                       }
+                       if (skip == -1 && address == 0) {
+                               if (reg_val <= val) {
+                                       skip = 0;
+                                       continue;
+                               }
+                       } else if (skip == 0) {
+                               if (reg_val > val) {
+                                       DRV_LOG(ERR,
+                                               "got %08X expected <= %" PRIx64,
+                                               reg_val, val);
+                                       goto parse_error;
+                               }
+                       }
+                       break;
+               case MLX5_RXP_ROF_ENTRY_CHECKSUM:
+                       break;
+               case MLX5_RXP_ROF_ENTRY_CHECKSUM_EX_EM:
+                       if (skip)
+                               continue;
+                       tmp_addr = rxp_get_reg_address(address);
+                       if (tmp_addr == UINT32_MAX)
+                               goto parse_error;
+
+                       ret = mlx5_devx_regex_register_read(priv->ctx, id,
+                                                           tmp_addr, &reg_val);
+                       if (ret) {
+                               DRV_LOG(ERR, "RXP CSR read failed!");
+                               return ret;
+                       }
+                       if (reg_val != val) {
+                               DRV_LOG(ERR, "got %08X expected <= %" PRIx64,
+                                       reg_val, val);
+                               goto parse_error;
+                       }
+                       break;
+               case MLX5_RXP_ROF_ENTRY_IM:
+                       if (skip)
+                               continue;
+                       /*
+                        * NOTE: All rules written to RXP must be carried out in
+                        * triplets of: 2xData + 1xAddr.
+                        * No optimisation is currently allowed in this
+                        * sequence to perform less writes.
+                        */
+                       temp = val;
+                       ret |= mlx5_devx_regex_register_write
+                                       (priv->ctx, id,
+                                        MLX5_RXP_RTRU_CSR_DATA_0, temp);
+                       temp = (uint32_t)(val >> 32);
+                       ret |= mlx5_devx_regex_register_write
+                                       (priv->ctx, id,
+                                        MLX5_RXP_RTRU_CSR_DATA_0 +
+                                        MLX5_RXP_CSR_WIDTH, temp);
+                       temp = address;
+                       ret |= mlx5_devx_regex_register_write
+                                       (priv->ctx, id, MLX5_RXP_RTRU_CSR_ADDR,
+                                        temp);
+                       if (ret) {
+                               DRV_LOG(ERR,
+                                       "Failed to copy instructions to RXP.");
+                               goto parse_error;
+                       }
+                       break;
+               case MLX5_RXP_ROF_ENTRY_EM:
+                       if (skip)
+                               continue;
+                       for (i = 0; i < MLX5_RXP_NUM_LINES_PER_BLOCK; i++) {
+                               ret = rxp_parse_line(line, &type,
+                                                    &rules[i].addr,
+                                                    &rules[i].value);
+                               if (ret != 0)
+                                       goto parse_error;
+                               if (i < (MLX5_RXP_NUM_LINES_PER_BLOCK - 1)) {
+                                       line = strtok(NULL, del);
+                                       if (!line)
+                                               goto parse_error;
+                               }
+                       }
+                       if ((uint8_t *)((uint8_t *)
+                                       priv->db[id].ptr +
+                                       ((rules[7].addr <<
+                                        MLX5_RXP_INST_OFFSET))) >=
+                                       ((uint8_t *)((uint8_t *)
+                                       priv->db[id].ptr + MLX5_MAX_DB_SIZE))) {
+                               DRV_LOG(ERR, "DB exceeded memory!");
+                               goto parse_error;
+                       }
+                       /*
+                        * Rule address Offset to align with RXP
+                        * external instruction offset.
+                        */
+                       rof_rule_addr = (rules[0].addr << MLX5_RXP_INST_OFFSET);
+                       /* 32 byte instruction swap (sw work around)! */
+                       tmp_write_swap[0] = le64toh(rules[4].value);
+                       tmp_write_swap[1] = le64toh(rules[5].value);
+                       tmp_write_swap[2] = le64toh(rules[6].value);
+                       tmp_write_swap[3] = le64toh(rules[7].value);
+                       /* Write only 4 of the 8 instructions. */
+                       memcpy((uint8_t *)((uint8_t *)
+                               priv->db[id].ptr + rof_rule_addr),
+                               &tmp_write_swap, (sizeof(uint64_t) * 4));
+                       /* Write 1st 4 rules of block after last 4. */
+                       rof_rule_addr = (rules[4].addr << MLX5_RXP_INST_OFFSET);
+                       tmp_write_swap[0] = le64toh(rules[0].value);
+                       tmp_write_swap[1] = le64toh(rules[1].value);
+                       tmp_write_swap[2] = le64toh(rules[2].value);
+                       tmp_write_swap[3] = le64toh(rules[3].value);
+                       memcpy((uint8_t *)((uint8_t *)
+                               priv->db[id].ptr + rof_rule_addr),
+                               &tmp_write_swap, (sizeof(uint64_t) * 4));
+                       break;
+               default:
+                       break;
+               }
+
+       }
+       ret = mlnx_set_database(priv, id, db_free);
+       if (ret < 0) {
+               DRV_LOG(ERR, "Failed to register db memory!");
+               goto parse_error;
+       }
        rte_free(tmp);
        return 0;
 parse_error:
        rte_free(tmp);
-       if (*rules)
-               rte_free(*rules);
-       return -EINVAL;
+       return ret;
 }
 
 static int
@@ -488,43 +584,85 @@ mlnx_update_database(struct mlx5_regex_priv *priv, uint8_t id)
  * Program RXP instruction db to RXP engine/s.
  */
 static int
-program_rxp_rules(struct mlx5_regex_priv *priv,
-                 struct mlx5_rxp_ctl_rules_pgm *rules, uint8_t id)
+program_rxp_rules(struct mlx5_regex_priv *priv, const char *buf, uint32_t len,
+                 uint8_t id)
 {
-       int ret, db_free;
-       uint32_t rule_cnt;
+       int ret;
+       uint32_t val;
 
-       rule_cnt = rules->count;
-       db_free = mlnx_update_database(priv, id);
-       if (db_free < 0) {
-               DRV_LOG(ERR, "Failed to setup db memory!");
-               return db_free;
+       ret = rxp_init_eng(priv, id);
+       if (ret < 0)
+               return ret;
+       /* Confirm the RXP is initialised. */
+       if (mlx5_devx_regex_register_read(priv->ctx, id,
+                                           MLX5_RXP_CSR_STATUS, &val)) {
+               DRV_LOG(ERR, "Failed to read from RXP!");
+               return -ENODEV;
        }
-       if (priv->prog_mode == MLX5_RXP_PRIVATE_PROG_MODE) {
-               /* Register early to ensure RXP writes to EM use valid addr. */
-               ret = mlnx_set_database(priv, id, db_free);
-               if (ret < 0) {
-                       DRV_LOG(ERR, "Failed to register db memory!");
-                       return ret;
-               }
+       if (!(val & MLX5_RXP_CSR_STATUS_INIT_DONE)) {
+               DRV_LOG(ERR, "RXP not initialised...");
+               return -EBUSY;
        }
-       ret = write_private_rules(priv, rules, id);
-       if (ret < 0) {
-               DRV_LOG(ERR, "Failed to write rules!");
-               return ret;
+       ret = mlx5_devx_regex_register_read(priv->ctx, id,
+                                           MLX5_RXP_RTRU_CSR_CTRL, &val);
+       if (ret) {
+               DRV_LOG(ERR, "CSR read failed!");
+               return -1;
        }
-       if (priv->prog_mode == MLX5_RXP_SHARED_PROG_MODE) {
-               /* Write external rules directly to EM. */
-               rules->count = rule_cnt;
-              /* Now write external instructions to EM. */
-               ret = write_shared_rules(priv, rules, rules->hdr.len, db_free);
+       val |= MLX5_RXP_RTRU_CSR_CTRL_GO;
+       ret = mlx5_devx_regex_register_write(priv->ctx, id,
+                                            MLX5_RXP_RTRU_CSR_CTRL, val);
+       if (ret) {
+               DRV_LOG(ERR, "Can't program rof file!");
+               return -1;
+       }
+       ret = rxp_program_rof(priv, buf, len, id);
+       if (ret) {
+               DRV_LOG(ERR, "Can't program rof file!");
+               return -1;
+       }
+       if (priv->is_bf2) {
+               ret = rxp_poll_csr_for_value
+                       (priv->ctx, &val, MLX5_RXP_RTRU_CSR_STATUS,
+                        MLX5_RXP_RTRU_CSR_STATUS_UPDATE_DONE,
+                        MLX5_RXP_RTRU_CSR_STATUS_UPDATE_DONE,
+                        MLX5_RXP_POLL_CSR_FOR_VALUE_TIMEOUT, id);
                if (ret < 0) {
-                       DRV_LOG(ERR, "Failed to write EM rules!");
+                       DRV_LOG(ERR, "Rules update timeout: 0x%08X", val);
                        return ret;
                }
-               ret = mlnx_set_database(priv, id, db_free);
-               if (ret < 0) {
-                       DRV_LOG(ERR, "Failed to register db memory!");
+               DRV_LOG(DEBUG, "Rules update took %d cycles", ret);
+       }
+       if (mlx5_devx_regex_register_read(priv->ctx, id, MLX5_RXP_RTRU_CSR_CTRL,
+                                         &val)) {
+               DRV_LOG(ERR, "CSR read failed!");
+               return -1;
+       }
+       val &= ~(MLX5_RXP_RTRU_CSR_CTRL_GO);
+       if (mlx5_devx_regex_register_write(priv->ctx, id,
+                                          MLX5_RXP_RTRU_CSR_CTRL, val)) {
+               DRV_LOG(ERR, "CSR write failed!");
+               return -1;
+       }
+       ret = mlx5_devx_regex_register_read(priv->ctx, id, MLX5_RXP_CSR_CTRL,
+                                           &val);
+       if (ret)
+               return ret;
+       val &= ~MLX5_RXP_CSR_CTRL_INIT;
+       ret = mlx5_devx_regex_register_write(priv->ctx, id, MLX5_RXP_CSR_CTRL,
+                                            val);
+       if (ret)
+               return ret;
+       rxp_init_rtru(priv, id, MLX5_RXP_RTRU_CSR_CTRL_INIT_MODE_L1_L2);
+       if (priv->is_bf2) {
+               ret = rxp_poll_csr_for_value(priv->ctx, &val,
+                                            MLX5_RXP_CSR_STATUS,
+                                            MLX5_RXP_CSR_STATUS_INIT_DONE,
+                                            MLX5_RXP_CSR_STATUS_INIT_DONE,
+                                            MLX5_RXP_CSR_STATUS_TRIAL_TIMEOUT,
+                                            id);
+               if (ret) {
+                       DRV_LOG(ERR, "Device init failed!");
                        return ret;
                }
        }
@@ -533,9 +671,9 @@ program_rxp_rules(struct mlx5_regex_priv *priv,
                DRV_LOG(ERR, "Failed to resume engine!");
                return ret;
        }
-       DRV_LOG(DEBUG, "Programmed RXP Engine %d\n", id);
-       rules->count = rule_cnt;
-       return 0;
+
+       return ret;
+
 }
 
 static int
@@ -579,7 +717,8 @@ rxp_init_eng(struct mlx5_regex_priv *priv, uint8_t id)
                                             ctrl);
        if (ret)
                return ret;
-       ret = rxp_init_rtru(ctx, id, MLX5_RXP_RTRU_CSR_CTRL_INIT_MODE_IM_L1_L2);
+       ret = rxp_init_rtru(priv, id,
+                           MLX5_RXP_RTRU_CSR_CTRL_INIT_MODE_IM_L1_L2);
        if (ret)
                return ret;
        ret = mlx5_devx_regex_register_read(ctx, id, MLX5_RXP_CSR_CAPABILITY_5,
@@ -605,285 +744,6 @@ rxp_init_eng(struct mlx5_regex_priv *priv, uint8_t id)
        return ret;
 }
 
-static int
-write_private_rules(struct mlx5_regex_priv *priv,
-                   struct mlx5_rxp_ctl_rules_pgm *rules,
-                   uint8_t id)
-{
-       unsigned int pending;
-       uint32_t block, reg, val, rule_cnt, rule_offset, rtru_max_num_entries;
-       int ret = 1;
-
-       if (priv->prog_mode == MLX5_RXP_MODE_NOT_DEFINED)
-               return -EINVAL;
-       if (rules->hdr.len == 0 || rules->hdr.cmd < MLX5_RXP_CTL_RULES_PGM ||
-                                  rules->hdr.cmd > MLX5_RXP_CTL_RULES_PGM_INCR)
-               return -EINVAL;
-       /* For a non-incremental rules program, re-init the RXP. */
-       if (rules->hdr.cmd == MLX5_RXP_CTL_RULES_PGM) {
-               ret = rxp_init_eng(priv, id);
-               if (ret < 0)
-                       return ret;
-       } else if (rules->hdr.cmd == MLX5_RXP_CTL_RULES_PGM_INCR) {
-               /* Flush RXP L1 and L2 cache by using MODE_L1_L2. */
-               ret = rxp_init_rtru(priv->ctx, id,
-                                   MLX5_RXP_RTRU_CSR_CTRL_INIT_MODE_L1_L2);
-               if (ret < 0)
-                       return ret;
-       }
-       if (rules->count == 0)
-               return -EINVAL;
-       /* Confirm the RXP is initialised. */
-       if (mlx5_devx_regex_register_read(priv->ctx, id,
-                                           MLX5_RXP_CSR_STATUS, &val)) {
-               DRV_LOG(ERR, "Failed to read from RXP!");
-               return -ENODEV;
-       }
-       if (!(val & MLX5_RXP_CSR_STATUS_INIT_DONE)) {
-               DRV_LOG(ERR, "RXP not initialised...");
-               return -EBUSY;
-       }
-       /* Get the RTRU maximum number of entries allowed. */
-       if (mlx5_devx_regex_register_read(priv->ctx, id,
-                       MLX5_RXP_RTRU_CSR_CAPABILITY, &rtru_max_num_entries)) {
-               DRV_LOG(ERR, "Failed to read RTRU capability!");
-               return -ENODEV;
-       }
-       rtru_max_num_entries = (rtru_max_num_entries & 0x00FF);
-       rule_cnt = 0;
-       pending = 0;
-       while (rules->count > 0) {
-               if ((rules->rules[rule_cnt].type == MLX5_RXP_ROF_ENTRY_INST) ||
-                   (rules->rules[rule_cnt].type == MLX5_RXP_ROF_ENTRY_IM) ||
-                   (rules->rules[rule_cnt].type == MLX5_RXP_ROF_ENTRY_EM)) {
-                       if ((rules->rules[rule_cnt].type ==
-                            MLX5_RXP_ROF_ENTRY_EM) &&
-                           (priv->prog_mode == MLX5_RXP_SHARED_PROG_MODE)) {
-                               /* Skip EM rules programming. */
-                               if (pending > 0) {
-                                       /* Flush any rules that are pending. */
-                                       rule_offset = (rule_cnt - pending);
-                                       ret = rxp_flush_rules(priv->ctx,
-                                               &rules->rules[rule_offset],
-                                               pending, id);
-                                       if (ret < 0) {
-                                               DRV_LOG(ERR, "Flushing rules.");
-                                               return -ENODEV;
-                                       }
-                                       pending = 0;
-                               }
-                               rule_cnt++;
-                       } else {
-                               pending++;
-                               rule_cnt++;
-                               /*
-                                * If parsing the last rule, or if reached the
-                                * maximum number of rules for this batch, then
-                                * flush the rules batch to the RXP.
-                                */
-                               if ((rules->count == 1) ||
-                                   (pending == rtru_max_num_entries)) {
-                                       rule_offset = (rule_cnt - pending);
-                                       ret = rxp_flush_rules(priv->ctx,
-                                               &rules->rules[rule_offset],
-                                               pending, id);
-                                       if (ret < 0) {
-                                               DRV_LOG(ERR, "Flushing rules.");
-                                               return -ENODEV;
-                                       }
-                                       pending = 0;
-                               }
-                       }
-               } else if ((rules->rules[rule_cnt].type ==
-                               MLX5_RXP_ROF_ENTRY_EQ) ||
-                        (rules->rules[rule_cnt].type ==
-                               MLX5_RXP_ROF_ENTRY_GTE) ||
-                        (rules->rules[rule_cnt].type ==
-                               MLX5_RXP_ROF_ENTRY_LTE) ||
-                        (rules->rules[rule_cnt].type ==
-                               MLX5_RXP_ROF_ENTRY_CHECKSUM) ||
-                        (rules->rules[rule_cnt].type ==
-                               MLX5_RXP_ROF_ENTRY_CHECKSUM_EX_EM)) {
-                       if (pending) {
-                               /* Flush rules before checking reg values. */
-                               rule_offset = (rule_cnt - pending);
-                               ret = rxp_flush_rules(priv->ctx,
-                                       &rules->rules[rule_offset],
-                                       pending, id);
-                               if (ret < 0) {
-                                       DRV_LOG(ERR, "Failed to flush rules.");
-                                       return -ENODEV;
-                               }
-                       }
-                       block = (rules->rules[rule_cnt].addr >> 16) & 0xFFFF;
-                       if (block == 0)
-                               reg = MLX5_RXP_CSR_BASE_ADDRESS;
-                       else if (block == 1)
-                               reg = MLX5_RXP_RTRU_CSR_BASE_ADDRESS;
-                       else {
-                               DRV_LOG(ERR, "Invalid ROF register 0x%08X!",
-                                       rules->rules[rule_cnt].addr);
-                               return -EINVAL;
-                       }
-                       reg += (rules->rules[rule_cnt].addr & 0xFFFF) *
-                               MLX5_RXP_CSR_WIDTH;
-                       ret = mlx5_devx_regex_register_read(priv->ctx, id,
-                                                           reg, &val);
-                       if (ret) {
-                               DRV_LOG(ERR, "RXP CSR read failed!");
-                               return ret;
-                       }
-                       if ((priv->prog_mode == MLX5_RXP_SHARED_PROG_MODE) &&
-                           ((rules->rules[rule_cnt].type ==
-                           MLX5_RXP_ROF_ENTRY_CHECKSUM_EX_EM) &&
-                           (val != rules->rules[rule_cnt].value))) {
-                               DRV_LOG(ERR, "Unexpected value for register:");
-                               DRV_LOG(ERR, "reg %x" PRIu32 " got %x" PRIu32,
-                                       rules->rules[rule_cnt].addr, val);
-                               DRV_LOG(ERR, "expected %" PRIx64 ".",
-                                       rules->rules[rule_cnt].value);
-                                       return -EINVAL;
-                       } else if ((priv->prog_mode ==
-                                MLX5_RXP_PRIVATE_PROG_MODE) &&
-                                (rules->rules[rule_cnt].type ==
-                                MLX5_RXP_ROF_ENTRY_CHECKSUM) &&
-                                (val != rules->rules[rule_cnt].value)) {
-                               DRV_LOG(ERR, "Unexpected value for register:");
-                               DRV_LOG(ERR, "reg %x" PRIu32 " got %x" PRIu32,
-                                       rules->rules[rule_cnt].addr, val);
-                               DRV_LOG(ERR, "expected %" PRIx64 ".",
-                                       rules->rules[rule_cnt].value);
-                               return -EINVAL;
-                       } else if ((rules->rules[rule_cnt].type ==
-                                       MLX5_RXP_ROF_ENTRY_EQ) &&
-                                 (val != rules->rules[rule_cnt].value)) {
-                               DRV_LOG(ERR, "Unexpected value for register:");
-                               DRV_LOG(ERR, "reg %x" PRIu32 " got %x" PRIu32,
-                                       rules->rules[rule_cnt].addr, val);
-                               DRV_LOG(ERR, "expected %" PRIx64 ".",
-                                       rules->rules[rule_cnt].value);
-                                       return -EINVAL;
-                       } else if ((rules->rules[rule_cnt].type ==
-                                       MLX5_RXP_ROF_ENTRY_GTE) &&
-                                (val < rules->rules[rule_cnt].value)) {
-                               DRV_LOG(ERR, "Unexpected value reg 0x%08X,",
-                                       rules->rules[rule_cnt].addr);
-                               DRV_LOG(ERR, "got %X, expected >= %" PRIx64 ".",
-                                       val, rules->rules[rule_cnt].value);
-                               return -EINVAL;
-                       } else if ((rules->rules[rule_cnt].type ==
-                                       MLX5_RXP_ROF_ENTRY_LTE) &&
-                                (val > rules->rules[rule_cnt].value)) {
-                               DRV_LOG(ERR, "Unexpected value reg 0x%08X,",
-                                       rules->rules[rule_cnt].addr);
-                               DRV_LOG(ERR, "got %08X expected <= %" PRIx64,
-                                       val, rules->rules[rule_cnt].value);
-                               return -EINVAL;
-                       }
-                       rule_cnt++;
-                       pending = 0;
-               } else {
-                       DRV_LOG(ERR, "Error: Invalid rule type %d!",
-                               rules->rules[rule_cnt].type);
-                       return -EINVAL;
-               }
-               rules->count--;
-       }
-       return ret;
-}
-
-/*
- * Shared memory programming mode, here all external db instructions are written
- * to EM via the host.
- */
-static int
-write_shared_rules(struct mlx5_regex_priv *priv,
-                  struct mlx5_rxp_ctl_rules_pgm *rules, uint32_t count,
-                  uint8_t db_to_program)
-{
-       uint32_t rule_cnt, rof_rule_addr;
-       uint64_t tmp_write_swap[4];
-
-       if (priv->prog_mode == MLX5_RXP_MODE_NOT_DEFINED)
-               return -EINVAL;
-       if ((rules->count == 0) || (count == 0))
-               return -EINVAL;
-       rule_cnt = 0;
-       /*
-        * Note the following section of code carries out a 32byte swap of
-        * instruction to coincide with HW 32byte swap. This may need removed
-        * in new variants of this programming function!
-        */
-       while (rule_cnt < rules->count) {
-               if ((rules->rules[rule_cnt].type == MLX5_RXP_ROF_ENTRY_EM) &&
-                   (priv->prog_mode == MLX5_RXP_SHARED_PROG_MODE)) {
-                       /*
-                        * Note there are always blocks of 8 instructions for
-                        * 7's written sequentially. However there is no
-                        * guarantee that all blocks are sequential!
-                        */
-                       if (count >= (rule_cnt + MLX5_RXP_INST_BLOCK_SIZE)) {
-                               /*
-                                * Ensure memory write not exceeding boundary
-                                * Check essential to ensure 0x10000 offset
-                                * accounted for!
-                                */
-                               if ((uint8_t *)((uint8_t *)
-                                   priv->db[db_to_program].ptr +
-                                   ((rules->rules[rule_cnt + 7].addr <<
-                                   MLX5_RXP_INST_OFFSET))) >=
-                                   ((uint8_t *)((uint8_t *)
-                                   priv->db[db_to_program].ptr +
-                                   MLX5_MAX_DB_SIZE))) {
-                                       DRV_LOG(ERR, "DB exceeded memory!");
-                                       return -ENODEV;
-                               }
-                               /*
-                                * Rule address Offset to align with RXP
-                                * external instruction offset.
-                                */
-                               rof_rule_addr = (rules->rules[rule_cnt].addr <<
-                                                MLX5_RXP_INST_OFFSET);
-                               /* 32 byte instruction swap (sw work around)! */
-                               tmp_write_swap[0] = le64toh(
-                                       rules->rules[(rule_cnt + 4)].value);
-                               tmp_write_swap[1] = le64toh(
-                                       rules->rules[(rule_cnt + 5)].value);
-                               tmp_write_swap[2] = le64toh(
-                                       rules->rules[(rule_cnt + 6)].value);
-                               tmp_write_swap[3] = le64toh(
-                                       rules->rules[(rule_cnt + 7)].value);
-                               /* Write only 4 of the 8 instructions. */
-                               memcpy((uint8_t *)((uint8_t *)
-                                      priv->db[db_to_program].ptr +
-                                      rof_rule_addr), &tmp_write_swap,
-                                      (sizeof(uint64_t) * 4));
-                               /* Write 1st 4 rules of block after last 4. */
-                               rof_rule_addr = (rules->rules[
-                                                (rule_cnt + 4)].addr <<
-                                                MLX5_RXP_INST_OFFSET);
-                               tmp_write_swap[0] = le64toh(
-                                       rules->rules[(rule_cnt + 0)].value);
-                               tmp_write_swap[1] = le64toh(
-                                       rules->rules[(rule_cnt + 1)].value);
-                               tmp_write_swap[2] = le64toh(
-                                       rules->rules[(rule_cnt + 2)].value);
-                               tmp_write_swap[3] = le64toh(
-                                       rules->rules[(rule_cnt + 3)].value);
-                               memcpy((uint8_t *)((uint8_t *)
-                                      priv->db[db_to_program].ptr +
-                                      rof_rule_addr), &tmp_write_swap,
-                                      (sizeof(uint64_t) * 4));
-                       } else
-                               return -1;
-                       /* Fast forward as already handled block of 8. */
-                       rule_cnt += MLX5_RXP_INST_BLOCK_SIZE;
-               } else
-                       rule_cnt++; /* Must be something other than EM rule. */
-       }
-       return 0;
-}
-
 static int
 rxp_db_setup(struct mlx5_regex_priv *priv)
 {
@@ -933,6 +793,7 @@ mlx5_regex_rules_db_import(struct rte_regexdev *dev,
        struct mlx5_rxp_ctl_rules_pgm *rules = NULL;
        uint32_t id;
        int ret;
+       uint32_t ver;
 
        if (priv->prog_mode == MLX5_RXP_MODE_NOT_DEFINED) {
                DRV_LOG(ERR, "RXP programming mode not set!");
@@ -944,10 +805,10 @@ mlx5_regex_rules_db_import(struct rte_regexdev *dev,
        }
        if (rule_db_len == 0)
                return -EINVAL;
-       ret = rxp_parse_rof(rule_db, rule_db_len, &rules);
-       if (ret) {
-               DRV_LOG(ERR, "Can't parse ROF file.");
-               return ret;
+       if (mlx5_devx_regex_register_read(priv->ctx, 0,
+                                         MLX5_RXP_CSR_BASE_ADDRESS, &ver)) {
+               DRV_LOG(ERR, "Failed to read Main CSRs Engine 0!");
+               return -1;
        }
        /* Need to ensure RXP not busy before stop! */
        for (id = 0; id < priv->nb_engines; id++) {
@@ -957,7 +818,7 @@ mlx5_regex_rules_db_import(struct rte_regexdev *dev,
                        ret = -ENODEV;
                        goto tidyup_error;
                }
-               ret = program_rxp_rules(priv, rules, id);
+               ret = program_rxp_rules(priv, rule_db, rule_db_len, id);
                if (ret < 0) {
                        DRV_LOG(ERR, "Failed to program rxp rules.");
                        ret = -ENODEV;
index d92b3ff..f3ffdfd 100644 (file)
@@ -5,6 +5,9 @@
 #ifndef _MLX5_RXP_CSRS_H_
 #define _MLX5_RXP_CSRS_H_
 
+/* BF types */
+#define MLX5_RXP_BF2_IDENTIFIER 0x07055254ul
+
 /*
  * Common to all RXP implementations
  */