dpdk.git
8 years agoapp/test: remove real PCI ids
Jan Viktorin [Tue, 14 Jun 2016 13:46:21 +0000 (15:46 +0200)]
app/test: remove real PCI ids

There are 2 new fake devices for testing PCI infra. All the fake devices
are now identified by non-existing vendor and device IDs so there is no
real driver to bind to them. The testing drivers match those IDs.

Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
8 years agoconfig: select maximum nodes and cores on ThunderX
Jerin Jacob [Mon, 13 Jun 2016 14:01:32 +0000 (19:31 +0530)]
config: select maximum nodes and cores on ThunderX

ThunderX platform can support dual sockets numa configuration and 48
cores per socket.

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
8 years agomk: define objcopy target and arch on IBM POWER
Chao Zhu [Wed, 15 Jun 2016 11:38:42 +0000 (19:38 +0800)]
mk: define objcopy target and arch on IBM POWER

This patch defines the target and arch value of objcopy program for
IBM POWER PPC64 little endian architecture.

Fixes: 99d6231fdca7 ("mk: define objcopy-specific target and arch")

Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
8 years agoexamples/ip_pipeline: add core mappings script
Guruprasad Mukundarao [Fri, 10 Jun 2016 15:55:05 +0000 (16:55 +0100)]
examples/ip_pipeline: add core mappings script

This script parses the application configuration file and detects all the
pipelines specified therein, and then, it generates all the possible mappings
of those pipelines on the specified CPU core-list.

As a result, each of the possible pipeline-to-core mappings is saved as
separate output configuration file. For example- if input file is
edge_router_downstream.cfg with 3 pipeline (excluding pipeline 0) and
core-list is “1, 2”, following combinations will be generated-

Pipeline 1        Pipeline 2      Pipeline 3
Core = 1          Core = 1        Core = 2
Core = 1          Core = 2        Core = 1
Core = 2          Core = 1        Core = 1
Core = 2          Core = 2        Core = 1
Core = 2          Core = 1        Core = 2
Core = 1          Core = 2        Core = 2
Core = C1         Core = C1H      Core = C2
Core = C1         Core = C2       Core = C1H
Core = C2         Core = C1       Core = C1H

This script will help users to analyse the performance of application by
evaluating all the generated configuration files with different
pipelines-to-core mappings and obtaining the application configuration file
with best performance.

To run the script, issue the following command;

./pipeline-to-core-mapping.py -i <input_configuration_file> -pc "s<socket-id>c<core-id>"

Some optional arguments are as follows:
  -h, --help            show this help message and exit
  -ht {ON,OFF}, --hyper-thread {ON,OFF}
                        enable/disable hyper threading. default is ON
  -nO, --no-output-file
                        disable output config file generation. Output file
                        generation is enabled by default

Signed-off-by: Guruprasad Mukundarao <guruprasadx.rao@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: fix false cacheline sharing among threads
Jasvinder Singh [Sun, 12 Jun 2016 12:42:47 +0000 (13:42 +0100)]
examples/ip_pipeline: fix false cacheline sharing among threads

In ip_pipeline app, the structure app_thread_data needs to be aligned to
the cache line boundary as threads on different cpu cores are accessing
fields of the app->thread_data and having this structure not aligned on
cacheline boundary leads to false cacheline sharing.

Fixes: 7f64b9c004aa ("examples/ip_pipeline: rework config file syntax")

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: fix null pointer dereference
Marcin Kerlin [Mon, 13 Jun 2016 09:35:48 +0000 (11:35 +0200)]
examples/ip_pipeline: fix null pointer dereference

Return value of function app_pipeline_type_find is not checking before
dereference. Fix this problem by adding checking condition.

Coverity issue: 127196
Fixes: b4aee0fb9c6d ("examples/ip_pipeline: reconfigure thread binding dynamically")

Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agosched: fix build without red
Jasvinder Singh [Thu, 2 Jun 2016 10:28:10 +0000 (11:28 +0100)]
sched: fix build without red

This commit fixes the following compile error messages when
CONFIG_RTE_SCHED_RED=n and CONFIG_RTE_SCHED_COLLECT_STATS=y;

rte_sched.c: In function ‘rte_sched_port_update_subport_stats_on_drop’:
rte_sched.c:1090:41: error: unused parameter ‘red’
struct rte_mbuf *pkt, uint32_t red)
                                         ^
rte_sched.c: In function ‘rte_sched_port_update_queue_stats_on_drop’:
rte_sched.c:1116:39: error: unused parameter ‘red’
struct rte_mbuf *pkt, uint32_t red)

Fixes: 4d51afb5cdb6 ("sched: keep track of RED drops")

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agokni: describe mempool capacity requirement
Alex Wang [Sat, 21 May 2016 07:58:36 +0000 (00:58 -0700)]
kni: describe mempool capacity requirement

Function like 'rte_kni_rx_burst()' keeps
allocating 'MAX_MBUF_BURST_NUM' mbufs to
kni fifo queue unless the queue's capacity
('KNI_FIFO_COUNT_MAX') is reached.  So, if
the mempool is under-provisioned, user may
run into "Out of Memory" logs from KNI code.
This commit documents the need to provision
mempool capacity of more than
"2 x KNI_FIFO_COUNT_MAX" for each KNI interface.

Signed-off-by: Alex Wang <alex@awakenetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
8 years agokni: fix inverted function comments
Alex Wang [Sat, 21 May 2016 07:58:35 +0000 (00:58 -0700)]
kni: fix inverted function comments

The 'mbufs' alloc/free descriptions for
'rte_kni_tx_burst()' and 'rte_kni_rx_burst()'
should be inverted.

Fixes: 3fc5ca2 ("kni: initial import")

Signed-off-by: Alex Wang <alex@awakenetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
8 years agodoc: add known issue in EAL argument parsing
Jingjing Wu [Mon, 23 May 2016 14:24:54 +0000 (22:24 +0800)]
doc: add known issue in EAL argument parsing

This patch docs the issue on EAL argument that the last EAL
argument is replaced by program name in argv[].

Reported-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
8 years agopci: support class id probing
Ziye Yang [Tue, 24 May 2016 12:50:36 +0000 (20:50 +0800)]
pci: support class id probing

This patch is used to add the class_id (class_code,
subclass_code, programming_interface) support for
pci_device probe. With this patch, it will be
flexible for users to probe a class of devices
by class_id.

Signed-off-by: Ziye Yang <ziye.yang@intel.com>
8 years agoconfig: make libarchive optional
Thomas Monjalon [Tue, 14 Jun 2016 08:51:39 +0000 (10:51 +0200)]
config: make libarchive optional

The commit 66819e6 has introduced a dependency on libarchive to be able
to use some tar resources in the unit tests.
It is now an optional dependency because some systems do not have it
installed.

If CONFIG_RTE_APP_TEST_RESOURCE_TAR is disabled, the PCI test will not
be run. When a "configure" script will be integrated, the libarchive
availability could be checked to automatically enable the option.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reviewed-by: Jan Viktorin <viktorin@rehivetech.com>
8 years agoapp/test: fix wraparound of mempool performance rate
David Hunt [Thu, 26 May 2016 14:15:54 +0000 (15:15 +0100)]
app/test: fix wraparound of mempool performance rate

Recent CPU's can easily wrap around a 32-bit unsigned int in
the mempool perf test. Increase to a 64-bit uint.

Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
8 years agoapp/test: fix bond device name too long
Michal Jastrzebski [Fri, 27 May 2016 15:20:52 +0000 (17:20 +0200)]
app/test: fix bond device name too long

Bond device name was too long (grather than 32 signs) that
cause mempool allocation to fail.

Fixes: 92073ef961ee ("bond: unit tests")

Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Tested-by: Huilong Xu <huilongx.xu@intel.com>
8 years agoapp/test: fix array overflow warning with gcc 4.5
Tomasz Kulasek [Thu, 9 Jun 2016 11:14:32 +0000 (13:14 +0200)]
app/test: fix array overflow warning with gcc 4.5

app/test/test_cryptodev.c:
In function ‘create_snow3g_cipher_operation_oop.clone.15’:
x86_64-native-linuxapp-gcc/include/rte_memcpy.h:796:14
error: array subscript is above array bounds.

In test_cryptodev.c:
2429 rte_memcpy(sym_op->cipher.iv.data, iv, iv_len);

When iv_len is declared as 'unsigned int', rte_memcpy evaluates code for
buffer size bigger than 255, but while 'iv' array is 64 bytes long, it
causes 'above array bounds' warning in gcc 4.5 and breaks compilation.

Using uint8_t as a size of copied block prevents to evaluate in rte_memcpy
code for length bigger than 255, causing the problem.

The root of this issue and solution is the same as for commit 2c007ea10616
("app/test: fix array overflow warning with gcc 4.5")

Fixes: 9727af14b032 ("app/test: add out-of-place symmetric crypto operations")

Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
8 years agoapp/test: reduce duration of red functional test
Tomasz Kantecki [Mon, 13 Jun 2016 10:26:38 +0000 (11:26 +0100)]
app/test: reduce duration of red functional test

'red_autotest' changed to run only functional tests without test #4 which was
taking ~53 seconds. 'red_autotest' takes ~2[s] now.
'red_perf' has been added to run performance tests only).
'red_all' has been added to run all functional tests (including #4) and
perfromance tests. This reflects current 'red_autotest' behavior.

Other changes:
- machine TSC clock frequency detection takes place only once now.
- timeouts and number of iterations in functional tests have been reduced
  in order to shorten test duration.

Signed-off-by: Tomasz Kantecki <tomasz.kantecki@intel.com>
8 years agoapp/test: do not dump devices in PCI blacklist test
Jan Viktorin [Mon, 13 Jun 2016 15:07:45 +0000 (17:07 +0200)]
app/test: do not dump devices in PCI blacklist test

Dumping of devices in a unittest is useless. Instead, test whether
the test has been set up well - i.e. there are no devices.

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
8 years agopci: allow to override sysfs path
Jan Viktorin [Mon, 13 Jun 2016 15:07:44 +0000 (17:07 +0200)]
pci: allow to override sysfs path

The SYSFS_PCI_DEVICES is a constant that makes the PCI testing
difficult as it points to an absolute path. We remove using this
constant and introducing a function pci_get_sysfs_path that gives
the same value. However, the user can pass a SYSFS_PCI_DEVICES env
variable to override the path. It is now possible to create a fake
sysfs hierarchy for testing.

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
8 years agoapp/test: rename PCI blacklist test case
Jan Viktorin [Mon, 13 Jun 2016 15:07:43 +0000 (17:07 +0200)]
app/test: rename PCI blacklist test case

The current test_pci is just a single test case that tests the
blacklisting of devices. Rename it to test_pci_blacklist and call it
from the test_pci. The setup and cleanup are moved out of the
test_pci_blacklist entirely to cover all other tests.

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
8 years agoapp/test: extract PCI setup and cleanup functions
Jan Viktorin [Mon, 13 Jun 2016 15:07:42 +0000 (17:07 +0200)]
app/test: extract PCI setup and cleanup functions

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
8 years agoapp/test: use linked list to store PCI drivers
Jan Viktorin [Mon, 13 Jun 2016 15:07:41 +0000 (17:07 +0200)]
app/test: use linked list to store PCI drivers

The test unregisters all drivers before start. The drivers were stored
into a fixed-sized array. This is inflexible. This patch change this to
utilize a linked list for the same purpose.

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
8 years agoapp/test: support resources archived by tar
Jan Viktorin [Mon, 13 Jun 2016 15:07:40 +0000 (17:07 +0200)]
app/test: support resources archived by tar

When a more complex resource (a file hierarchy) is needed, packing
every single file as a single resource would be very ineffective. For
that purpose, it is possible to pack the files into a tar archive,
extract it before test from the resource and finally clean up all the
created files.

This patch introduces functions resource_untar and resource_rm_by_tar
to perform those tasks. An example of using those functions is included
as a test.

A new dependency is required to build the app/test: libarchive.

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
8 years agoapp/test: create files from resources
Jan Viktorin [Mon, 13 Jun 2016 15:07:39 +0000 (17:07 +0200)]
app/test: create files from resources

A resource can be written into the target filesystem by calling
resource_fwrite or resource_fwrite_file. Such file can be created
before a test is started and removed after the test finishes.

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
8 years agoapp/test: support resources externally linked
Jan Viktorin [Mon, 13 Jun 2016 15:07:38 +0000 (17:07 +0200)]
app/test: support resources externally linked

To include resources from other source that the C source code we
can take advantage of the objcopy behaviour, i.e. packing of an
arbitrary file as an object file that is linked to the target program.

A linked object file is always accessible as a pair

extern const char beg_<name>;
extern const char end_<name>;
(extern const char siz_<name>;)

A unit test that packs the resource.c source file is included.

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
8 years agoapp/test: introduce resources for tests
Jan Viktorin [Mon, 13 Jun 2016 15:07:36 +0000 (17:07 +0200)]
app/test: introduce resources for tests

Certain internal mechanisms of DPDK access different file system
structures (e.g. /sys/bus/pci/devices). It is difficult to test
those cases automatically by a unit test when such path is not
hard-coded and there is no simple way how to distribute fake ones
with the current testing environment.

This patch adds a possibility to declare a resource embedded in
the test binary itself. The structure resource cover the generic
situation - it provides a name for lookup and pointers to the
embedded data blob. A resource is registered in a constructor by
the macro REGISTER_RESOURCE.

Some initial tests of simple resources is included and added into
the group_1.

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
8 years agomk: define objcopy-specific target and arch
Jan Viktorin [Mon, 13 Jun 2016 15:07:37 +0000 (17:07 +0200)]
mk: define objcopy-specific target and arch

The program objcopy uses non-standard conventions to name the
target and arch. Define the values for supported architectures
(tile and ppc_64 are missing).

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
8 years agomk: fix missing internal dependencies
Christian Ehrhardt [Mon, 13 Jun 2016 11:06:57 +0000 (13:06 +0200)]
mk: fix missing internal dependencies

This patch adds missing DEPDIRS to avoid any library referring to
symbols they are not linked against.

Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
8 years agomk: fix vhost dependency to pthread
Christian Ehrhardt [Mon, 13 Jun 2016 11:06:56 +0000 (13:06 +0200)]
mk: fix vhost dependency to pthread

Add the missing external dependency to pthread to avoid referring to
symbols the library is not linked against.

Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
8 years agomk: reduce scope of whole-archive static linking
Ferruh Yigit [Fri, 10 Jun 2016 13:19:09 +0000 (15:19 +0200)]
mk: reduce scope of whole-archive static linking

The --whole-archive argument is only required for plugins (drivers)
and libraries used by these plugins.
Currently it covers all libraries.
Reducing the scope of this argument slightly reduce final application size
when statically linked.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
8 years agomk: sort libraries in level order when linking
Thomas Monjalon [Fri, 10 Jun 2016 13:19:08 +0000 (15:19 +0200)]
mk: sort libraries in level order when linking

As stated in the comment:
    Order is important: from higher level to lower level

This is an attempt to make the layering order better respected.
It will help to restrict the --whole-archive scope for plugins.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
8 years agomk: prevent overlinking in applications
Ferruh Yigit [Fri, 10 Jun 2016 13:19:07 +0000 (15:19 +0200)]
mk: prevent overlinking in applications

Replace --no-as-needed linker flag with --as-needed flag, which will
only link libraries directly called by application.
It can be achieved now that the libraries dependencies are handled
properly.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
8 years agomk: remove library grouping during application linking
Thomas Monjalon [Fri, 10 Jun 2016 13:19:06 +0000 (15:19 +0200)]
mk: remove library grouping during application linking

>From "man ld":
  Using this option has a significant performance cost.
  It is best to use it only when there are unavoidable
  circular references between two or more archives.

Remove the option since it does not seem necessary.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
8 years agomk: fix driver dependencies order for static application
Thomas Monjalon [Fri, 10 Jun 2016 13:19:05 +0000 (15:19 +0200)]
mk: fix driver dependencies order for static application

On a linker command line, the dependencies must be declared after
the libraries using them.
It will avoid some issues when building an application with static
libraries and --as-needed option.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
8 years agomk: sort drivers in static application link list
Thomas Monjalon [Fri, 10 Jun 2016 13:19:04 +0000 (15:19 +0200)]
mk: sort drivers in static application link list

Just a clean up to prepare next patches.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
8 years agomk: fix install with tar 1.29
Panu Matilainen [Mon, 23 May 2016 05:53:33 +0000 (08:53 +0300)]
mk: fix install with tar 1.29

--exclude became a positional option in tar 1.29, breaking the
test app filtering in "make install", causing .map files and all test
apps to get installed in bindir. Adjust the tar arguments accordingly,
this is compatible with older versions too since they do not care about
the order.

Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1337864

Fixes: 6b62a72a70d0 ("mk: install a standard cutomizable tree")

Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
8 years agoeal: remove useless includes of mempool and ring
Thomas Monjalon [Thu, 9 Jun 2016 14:40:01 +0000 (16:40 +0200)]
eal: remove useless includes of mempool and ring

The libraries rte_mempool and rte_ring are not used in EAL,
except for the ivshmem part (CONFIG_RTE_LIBRTE_IVSHMEM).

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
8 years agolog: deprecate history dump
Thomas Monjalon [Thu, 9 Jun 2016 13:49:48 +0000 (15:49 +0200)]
log: deprecate history dump

The log history uses rte_mempool. In order to remove the mempool
dependency in EAL (and improve the build), this feature is deprecated.
The ABI is kept but the behaviour is now voided because it seems this
function was not used. The history can be read from syslog.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
8 years agomk: generate internal library dependencies
Panu Matilainen [Tue, 7 Jun 2016 10:01:54 +0000 (13:01 +0300)]
mk: generate internal library dependencies

Up to now dependencies between DPDK internal libraries have been
untracked at shared library level, requiring applications to know
about library internal dependencies and often consequently overlinking.

Since the dependencies are already recorded for build ordering in the
makefiles with DEPDIRS-y we can use that information to generate LDLIBS
entries for internal libraries automatically.

Also revert commit 8180554d82b3 ("vhost: fix linkage of driver with
library") which is made redundant by this change.

Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
8 years agodoc: fix code section in versioning guide
John McNamara [Fri, 20 May 2016 14:08:39 +0000 (15:08 +0100)]
doc: fix code section in versioning guide

Fix broken console directive in the ABI validator section of the
ABI versioning docs.

Fixes: f1ef9794f9bd ("doc: add ABI guidelines")

Signed-off-by: John McNamara <john.mcnamara@intel.com>
8 years agodoc: fix testpmd commands for flow director
Mauricio Vasquez B [Tue, 7 Jun 2016 08:48:53 +0000 (10:48 +0200)]
doc: fix testpmd commands for flow director

A previous patch modified the CLIs witout updating the examples.

Fixes: 53b2bb9b7ea7 ("app/testpmd: new flow director commands")

Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
8 years agodoc: clarify port hotplug in testpmd
Pablo de Lara [Wed, 8 Jun 2016 15:40:17 +0000 (16:40 +0100)]
doc: clarify port hotplug in testpmd

Port needs to be stopped and then closed before it can be detached,
but the documentation was only saying to close the port.

Also, both sections for port detaching and attaching has been reformatted
slightly, to show clearly how to use the commands.

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
8 years agoapp/testpmd: fix typo when closing port
Pablo de Lara [Wed, 8 Jun 2016 15:20:31 +0000 (16:20 +0100)]
app/testpmd: fix typo when closing port

Fixes: ce8d561418d4 ("app/testpmd: add port configuration settings")

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
8 years agoapp/testpmd: prefetch data in the forwarding loop
Jerin Jacob [Tue, 3 May 2016 14:07:45 +0000 (19:37 +0530)]
app/testpmd: prefetch data in the forwarding loop

prefetch the next packet data address in advance in forwarding loop
for performance improvement.

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
8 years agoapp/testpmd: log mbuf pool creation
Olivier Matz [Mon, 30 May 2016 12:04:17 +0000 (14:04 +0200)]
app/testpmd: log mbuf pool creation

Enhance the logs related to mbuf pool creation. Display an info level
log when creating the mbuf, and display the error as a string on failure.

After the patch, we have:

  [...]
  EAL:   probe driver: 8086:10fb rte_ixgbe_pmd
  USER1: create a new mbuf pool <mbuf_pool_socket_0>: n=331456, \
      size=2176, socket=0
  EAL: Error - exiting with code: 1
    Cause: Creation of mbuf pool for socket 0 failed: Cannot allocate \
      memory

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
8 years agoapp/testpmd: add Tx flags in config command
Maciej Czekaj [Fri, 22 Apr 2016 14:51:20 +0000 (16:51 +0200)]
app/testpmd: add Tx flags in config command

"port config all txqflags <value>" allows for
specifying txq_flags value in command line.

Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
8 years agoapp/testpmd: add scatter enabling in config command
Maciej Czekaj [Fri, 22 Apr 2016 14:51:19 +0000 (16:51 +0200)]
app/testpmd: add scatter enabling in config command

"port config all scatter on|off" allows for
controlling rxmode.enable_scatter in command line.

Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
8 years agoapp/testpmd: add scatter enabling option
Maciej Czekaj [Fri, 22 Apr 2016 14:51:18 +0000 (16:51 +0200)]
app/testpmd: add scatter enabling option

This parameter allows for controlling rxmode.enable_scatter
which in turn allow for multi-segment packet receive tests.

Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
8 years agoexamples/quota_watermark: fix memory overflow
Piotr Azarewicz [Mon, 23 May 2016 12:19:56 +0000 (14:19 +0200)]
examples/quota_watermark: fix memory overflow

qw app at its init stage reserve 2*sizeof(int) memory space for quota
and low_watermark shared variables, but both apps (qw and qwctl) assign
wrong address for low_watermark pointer (out of reserved memzone space)
due to wrong pointer arithmetic.

CID 30709 : Extra sizeof expression (SIZEOF_MISMATCH)
suspicious_pointer_arithmetic: Adding 4UL /* sizeof (int) */ to pointer
(unsigned int *)(*qw_memzone).addr of type unsigned int * is suspicious
because adding an integral value to this pointer automatically scales
that value by the size, 4 bytes, of the pointed-to type, unsigned int.
Most likely, sizeof (int) is extraneous and should be replaced with 1.

Coverity issue: 30709
Fixes: 1d6c3ee3321a ("examples/quota_watermark: initial import")

Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
8 years agoexamples/performance-thread: fix size of destination port ids
Tomasz Kulasek [Fri, 29 Apr 2016 16:30:24 +0000 (18:30 +0200)]
examples/performance-thread: fix size of destination port ids

After extending IPv4 next hop in lpm library, size of dst_port array was
changed from 16 to 32 bits in l3fwd-thread example, without modification
of the rest of path written for 16 bit value.

This patch uses similar approach for fix, like in commit 8353a36a9b4b
("examples/l3fwd: fix size of destination port ids"), restoring 16 bit size
for destination port ids and doing necessary conversion from 32 to 16 bit
after lpm_lookupx4.

Fixes: dc81ebbacaeb ("lpm: extend IPv4 next hop field")

Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
8 years agoexamples/performance-thread: fix destination port
Tomasz Kulasek [Fri, 29 Apr 2016 16:30:56 +0000 (18:30 +0200)]
examples/performance-thread: fix destination port

This fixes wrong logic in get_dst_port() on lpm path causing unpredictable
return value when ipv4/ipv6 lookup success (return with no value).

Fixes: dc81ebbacaeb ("lpm: extend IPv4 next hop field")

Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
8 years agoexamples/l3fwd: report error when no vector engine available
Jan Viktorin [Tue, 26 Apr 2016 11:30:59 +0000 (13:30 +0200)]
examples/l3fwd: report error when no vector engine available

If no SSE nor NEON are available the l3fwd should complain loudly
to quickly find out the reason.

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
8 years agoexamples/l2fwd-jobstats: fix a typo
Rami Rosen [Thu, 21 Apr 2016 18:16:47 +0000 (21:16 +0300)]
examples/l2fwd-jobstats: fix a typo

Signed-off-by: Rami Rosen <rami.rosen@intel.com>
8 years agoexamples/l2fwd: increase mempool cache size for performance
Jerin Jacob [Tue, 19 Apr 2016 09:35:28 +0000 (15:05 +0530)]
examples/l2fwd: increase mempool cache size for performance

l3fwd sets the mempool cache size to 256, selected the same value for l2fwd

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
8 years agoexamples/l2fwd: remove hardcoded cycles per second
Jerin Jacob [Tue, 19 Apr 2016 09:35:27 +0000 (15:05 +0530)]
examples/l2fwd: remove hardcoded cycles per second

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
8 years agoexamples/ip_pipeline: add sample configs for various layers
Jasvinder Singh [Wed, 1 Jun 2016 14:01:02 +0000 (15:01 +0100)]
examples/ip_pipeline: add sample configs for various layers

The sample configuration file demonstrates that network layer components such
as TCP, UDP, ICMP etc, can be easily integrated into ip pipeline infrastructure.
Similarily, various other functionalities such as IP Reassembly for input
traffic with local destination and IP Fragmentation to enforce the MTU for
the routed output traffic, can be added using SWQs enabled with
reassembly and fragmentation features.

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: update routes when ports state change
Jasvinder Singh [Wed, 1 Jun 2016 14:01:01 +0000 (15:01 +0100)]
examples/ip_pipeline: update routes when ports state change

The routing pipeline registers a callback function with the nic ports and
this function is invoked for updating the routing entries (corresponding to
local host and directly attached network) tables whenever the nic ports
change their states (up/down).

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: assign MAC address to routing ports
Jasvinder Singh [Wed, 1 Jun 2016 14:01:00 +0000 (15:01 +0100)]
examples/ip_pipeline: assign MAC address to routing ports

As a result of tracking, output ports of routing pipelines are linked with
physical nic ports (potentially through other pipeline instances).
Thus, the mac addresses of the NIC ports are assigned to routing pipeline
out ports which are connected to them and are further used in routing table
entries instead of hardcoded default values.

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: link routing output ports to devices
Jasvinder Singh [Wed, 1 Jun 2016 14:00:59 +0000 (15:00 +0100)]
examples/ip_pipeline: link routing output ports to devices

This commit implements tracking mechanism for linking routing pipeline
output ports to physical NIC ports.

Once all the pipelines of the application are initialised, mechanism is
invoked during post initialisation phase for relating routing pipeline
output with NIC ports by navigating through the intermediate pipelines,
if present.

The tracking functions of the pipelines which help in navigating through
the intermediate pipelines are moved from pipeline_<pipeline_name>_be.c
to pipeline_<pipeline_name>.c. All pipelines except passthrough pipelines
use default tracking function (pipeline/pipeline_common_fe.c).

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: increase constants
Jasvinder Singh [Wed, 1 Jun 2016 14:00:58 +0000 (15:00 +0100)]
examples/ip_pipeline: increase constants

To allow more queues, pipeline types, threads, source/sink ports,etc., in
the ip pipeline application, larger values of macros are set.

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: support RSS
Jasvinder Singh [Mon, 30 May 2016 17:14:49 +0000 (18:14 +0100)]
examples/ip_pipeline: support RSS

This patch enables rss (receive side scaling) per network interface
through the configuration file. The user can specify following
parameters in LINK section for enabling the rss feature - rss_qs,
rss_proto_ipv4, rss_proto_ipv6 and ip_proto_l2.

The "rss_qs" is mandatory parameter which indicates the queues to be
used for rss, while rest of the parameters are optional. When optional
parameters are not provided in the configuration file, default setting
(ETH_RSS_IPV4 | ETH_RSS_IPV6) is assumed for "rss_hf" field of the
rss_conf structure.

For example, following configuration can be applied for using the rss
on port 0 of the network interface;

[PIPELINE0]
type = MASTER
core = 0

[LINK0]
rss_qs = 0 1

[PIPELINE1]
type = PASS-THROUGH
core = 1
pktq_in = RXQ0.0 RXQ0.1 RXQ1.0
pktq_out = TXQ0.0 TXQ1.0 TXQ0.1

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: clean up configuration parser
Jasvinder Singh [Wed, 8 Jun 2016 16:30:56 +0000 (17:30 +0100)]
examples/ip_pipeline: clean up configuration parser

This commit adds following changes to configuration file parsing of
the ip pipeline application;

1. Parsing routines related to packet queues (pktq_in/out fields in the
PIPELINE section) and message queues (msgq_in/out fields of in the MSGQ
Section) are updated.

In the parsing routines, function "strtok_r()" is used for parsing the
string instead of manually checking the string termination, white
spaces, tabs etc., between the string tokens. Each call to strtok_r()
returns a pointer to a null-terminated string containing the next token.
If no more tokens are found, strtok_r() returns NULL. As a result of
using strtok_r(), the code size of the parsing routines is reduced
significantly.

2. Replace PARSER_PARAM_ADD_CHECK macro by more specific macros such as
PARSE_CHECK_DUPLICATE_SECTION, PARSE_CHECK_DUPLICATE_SECTION_EAL to detect
duplicate entries in the various sections of the configuration file

3. Add new macros PARSER_ERROR_NO_ELEMENTS and PARSE_ERROR_TOO_MANY_ELEMENTS
for detecting no element and more elements than allowed situations
respectively, in the section entry.

4. Add new macros APP_PARAM_ADD_LINK_FOR_RXQ, APP_PARAM_ADD_LINK_FOR_TXQ
and APP_PARAM_ADD_LINK_FOR_TM which add corresponding nic ports entry to
the application param structure while parsing rx/tx queues, TM (Traffic
Manager) port sections and pktq_in/out entries of pipeline sections

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: update edge router use case
Piotr Azarewicz [Wed, 8 Jun 2016 10:35:25 +0000 (12:35 +0200)]
examples/ip_pipeline: update edge router use case

Update edge router usecase config files to use bulk commands.

Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: rework routing CLI
Piotr Azarewicz [Wed, 8 Jun 2016 10:35:24 +0000 (12:35 +0200)]
examples/ip_pipeline: rework routing CLI

Several routing commands are merged into two commands:
route and arp - these two commands are handled by cli library.
Rest of the commands are handled internaly by the pipeline code.

Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: rework flow action CLI
Piotr Azarewicz [Wed, 8 Jun 2016 10:35:23 +0000 (12:35 +0200)]
examples/ip_pipeline: rework flow action CLI

All commands merged into one: cmd_action_parsed.

modified bulk command:
action flow bulk
File line format:
flow <flow ID>
meter 0 <cir> <pir> <cbs> <pbs> meter 1 <cir> <pir> <cbs> <pbs> meter 2
<cir> <pir> <cbs> <pbs> meter 3 <cir> <pir> <cbs> <pbs>
policer 0 <action> <action> <action> policer 1 <action> <action>
<action> policer 2 <action> <action> <action> policer 3 <action>
<action> <action>
port <port ID>

Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: rework flow classification CLI
Tomasz Kulasek [Wed, 8 Jun 2016 10:35:22 +0000 (12:35 +0200)]
examples/ip_pipeline: rework flow classification CLI

This patch modifies flow classifications pipeline command line
interface. All commands are merged into one cmd_fc_parsed.
Additionally a classification for ipv6, ipv4 and qinq can be added from
configuration file.

1. flow add qinq bulk
File line format:
qinq <svlan> <cvlan> port <port ID> id <flow ID>
File line example:
qinq 1 2 port 3 id 0

2. flow add ipv4 bulk
File line format:
ipv4 <sipaddr> <dipaddr> <sport> <dport> <proto> port <port ID> id
<flowID>
File line example:
ipv4 1.2.3.4 10.20.30.40 63 127 6 port 2 id 999

3. flow add ipv6 bulk
File line format:
ipv6 <sipaddr> <dipaddr> <sport> <dport> <proto> port <port ID> id
<flowID>

Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: rework firewall CLI
Daniel Mrzyglod [Wed, 8 Jun 2016 10:35:21 +0000 (12:35 +0200)]
examples/ip_pipeline: rework firewall CLI

Each command are merged into one: cmd_firewall_parsed.
ADD command format is changed:
p <pipeline ID> firewall add priority <priority> ipv4 <sipaddr>
<sipdepth> <dipaddr> <dipdepth> <sport0> <sport1> <dport0> <dport1>
<proto> <protomask> port <port ID>

and bulk command was modified:
1. firewall add bulk
File line format:
priority <priority> ipv4 <sipaddr> <sipdepth> <dipaddr> <dipdepth>
<sport0> <sport1> <dport0> <dport1> <proto> <protomask> port <port ID>
(protomask is a hex value)
File line example:
priority 0 ipv4 1.2.3.0 24 10.20.30.40 32 0 63 64 127 6 0xF port 3

2. firewall del bulk
File line format:
ipv4 <sipaddr> <sipdepth> <dipaddr> <dipdepth> <sport0> <sport1>
<dport0> <dport1> <proto> <protomask>
File line example:
ipv4 1.2.3.0 24 10.20.30.40 32 0 63 64 127 6 0xF

Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: rework common CLI
Tomasz Kulasek [Wed, 8 Jun 2016 10:35:20 +0000 (12:35 +0200)]
examples/ip_pipeline: rework common CLI

All link commands are merged into one command:
cmd_link_parsed.
Improve run command to allow run periodically.
Adding static keyword to a lot of token declarations.

Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: add string parsing helpers
Piotr Azarewicz [Wed, 8 Jun 2016 10:35:19 +0000 (12:35 +0200)]
examples/ip_pipeline: add string parsing helpers

Add a couple of additional functions that will allow to parse many types
of input parameters, i.e.: bool, 16, 32, 64 bits, hex, etc.

Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/ip_pipeline: fix null packet in source port
Fan Zhang [Tue, 17 May 2016 16:02:10 +0000 (17:02 +0100)]
examples/ip_pipeline: fix null packet in source port

This patch fixes the NULL packet processing problem. Originally,
pipeline's write attempt to NULL packets generated by source
port may crash the application.

This patch fixes the problem by enforcing each source port
defined in cfg file containing a user specified or default pcap
file path.

Fixes: 0e1e7d53 ("examples/ip_pipeline: add pcap file source")

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agotable: remove unnecessary acl dump
Jasvinder Singh [Thu, 19 May 2016 14:35:08 +0000 (15:35 +0100)]
table: remove unnecessary acl dump

Removes rte_acl_dump() call from rte_table_acl_build () as it invokes
number of printf messages.

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
8 years agoexamples/l2fwd-crypto: fix supported key size check
Pablo de Lara [Tue, 12 Apr 2016 10:04:03 +0000 (11:04 +0100)]
examples/l2fwd-crypto: fix supported key size check

When initializing crypto devices within the app,
the provided key sizes are checked against the supported
sizes from the crypto device capabilities.

When the supported sizes are not a range, but a single value,
the check may become an infinite loop (when size is not supported).

Fixes: a061e50a0d97 ("examples/l2fwd-crypto: fix ambiguous input key size")

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
8 years agodoc: fix l2fwd-crypto sample command
Fan Zhang [Wed, 25 May 2016 09:00:15 +0000 (10:00 +0100)]
doc: fix l2fwd-crypto sample command

Corrected a typo in application name.

Corrected authentication algorithm to fit the sample 16-byte
authentication key.

Fixes: ba7b86b1 ("doc: add l2fwd-crypto sample app guide")

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
8 years agoexamples/l2fwd-crypto: enable AES-XCBC-MAC authentication algo
Fan Zhang [Wed, 25 May 2016 09:00:45 +0000 (10:00 +0100)]
examples/l2fwd-crypto: enable AES-XCBC-MAC authentication algo

This patch enables AES-XCBC-MAC authentication algorithm support to
l2fwd-crypto sample application.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
8 years agoexamples/l2fwd-crypto: enable AES-CTR cipher algorithm
Fan Zhang [Fri, 3 Jun 2016 10:11:59 +0000 (11:11 +0100)]
examples/l2fwd-crypto: enable AES-CTR cipher algorithm

This patch enables AES counter mode algorithm support to l2fwd-crypto
sample application.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
8 years agoaesni_mb: add AES-CTR
Fan Zhang [Fri, 3 Jun 2016 10:11:57 +0000 (11:11 +0100)]
aesni_mb: add AES-CTR

This patch provides counter mode support to AES-NI multi-buffer library.

The following cipher algorithm is enabled:
- RTE_CRYPTO_CIPHER_AES_CTR

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
8 years agoapp/test: add AES-CTR
Arek Kusztal [Fri, 6 May 2016 10:22:16 +0000 (11:22 +0100)]
app/test: add AES-CTR

Added tests cases for AES working in counter mode.

Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
8 years agoqat: add AES-CTR capability
Arek Kusztal [Fri, 6 May 2016 10:22:15 +0000 (11:22 +0100)]
qat: add AES-CTR capability

Added possibility for AES to work in counter mode

Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
8 years agoqat: set default optimization level
Arek Kusztal [Tue, 7 Jun 2016 16:58:14 +0000 (17:58 +0100)]
qat: set default optimization level

Changed to -O3 optimization flag in Intel QuickAssist Technology Makefile.

Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
8 years agoqat: avoid strict-aliasing break
Arek Kusztal [Tue, 7 Jun 2016 16:58:13 +0000 (17:58 +0100)]
qat: avoid strict-aliasing break

To avoid GCC warning about "dereferencing type-punned pointer will break
strict-aliasing rules" aad_len pointer is dereferenced instead of direct
dereferencing of uint32_t* cast of the middle of an array.

Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
8 years agoqat: fix physical address of content descriptor
Arek Kusztal [Wed, 1 Jun 2016 10:52:00 +0000 (11:52 +0100)]
qat: fix physical address of content descriptor

Fix an error with computation of physical address of
content descriptor in the symmetric operations session

Fixes: 1703e94ac5ce ("qat: add driver for QuickAssist devices")

Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
8 years agoqat: fix null pointer dereferencing
Deepak Kumar Jain [Wed, 18 May 2016 16:12:38 +0000 (17:12 +0100)]
qat: fix null pointer dereferencing

Fix null pointer dereferencing while clearing session

Coverity issue: 126586
Fixes: 1703e94ac5ce ("qat: add driver for QuickAssist devices")

Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
8 years agoaesni_mb: fix null pointer dereferencing
Deepak Kumar Jain [Tue, 7 Jun 2016 09:36:11 +0000 (10:36 +0100)]
aesni_mb: fix null pointer dereferencing

Fix null pointer dereferencing by reporting if null and
exiting the function.

Coverity issue: 126584
Fixes: c0f87eb5252b ("cryptodev: change burst API to be crypto op oriented")

Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
8 years agoaesni_mb: fix an indent
Deepak Kumar Jain [Tue, 7 Jun 2016 09:34:44 +0000 (10:34 +0100)]
aesni_mb: fix an indent

Fix wrong indentation for return value

Coverity issue: 126585
Fixes: 924e84f87306 ("aesni_mb: add driver for multi buffer based crypto")

Signed-off-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
8 years agodoc: fix supported AES-CBC key lengths
Pablo de Lara [Thu, 5 May 2016 10:00:45 +0000 (11:00 +0100)]
doc: fix supported AES-CBC key lengths

AES-NI MB PMD supports 128, 192 and 256-bit keys,
not 128, 256 and 512-bit keys.

Fixes: 924e84f87306 ("aesni_mb: add driver for multi buffer based crypto")

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
8 years agoivshmem: add all memzones of mempool to metadata
Ferruh Yigit [Fri, 3 Jun 2016 16:38:38 +0000 (17:38 +0100)]
ivshmem: add all memzones of mempool to metadata

Mempool consist of multiple memzones, at least from two of them.
ivshmem assumes mempool and elements are all in same memzone.

Updating code to add all memzones when a mempool added.

Fixes: d1d914ebbc25 ("mempool: allocate in several memory chunks by default")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
8 years agoivshmem: document a potential crash in rte_ring
Anatoly Burakov [Wed, 1 Jun 2016 14:51:57 +0000 (15:51 +0100)]
ivshmem: document a potential crash in rte_ring

Commit 4768c475 added a pointer to the memzone in rte_ring. However,
all memzones are residing in local mem_config, therefore accessing
the memzone pointer inside the guest in an IVSHMEM-shared rte_ring
will cause segmentation fault. This issue is unlikely to ever get
fixed, as this would require lots of changes for very little benefit,
therefore we're documenting this limitation instead.

Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
8 years agoivshmem: fix overlap detection
Anatoly Burakov [Tue, 24 May 2016 12:50:05 +0000 (13:50 +0100)]
ivshmem: fix overlap detection

Partial revert of an earlier ill-conceived "fix".
Adjacent segments can never be considered overlapping because we
are not comparing ends to starts, but rather starts to starts.
Therefore the earlier fix was wrong (plus it also had a typo).

Fixes: d6cf31419e51 ("ivshmem: avoid infinite loop when concatenating segments")

Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
8 years agokni: move more kernel version check to compat header
Ferruh Yigit [Mon, 30 May 2016 11:22:34 +0000 (12:22 +0100)]
kni: move more kernel version check to compat header

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
8 years agokni: fix spacing in compat header
Ferruh Yigit [Mon, 30 May 2016 11:22:33 +0000 (12:22 +0100)]
kni: fix spacing in compat header

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
8 years agokni: fix build with kernel 4.7
Ferruh Yigit [Mon, 30 May 2016 11:22:32 +0000 (12:22 +0100)]
kni: fix build with kernel 4.7

Fix compile error because of Linux API change, 'trans_start' field
removed from 'struct net_device'.

Linux: 9b36627acecd ("net: remove dev->trans_start")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
8 years agokni: fix build clean on Ubuntu
Olivier Matz [Mon, 30 May 2016 11:56:46 +0000 (13:56 +0200)]
kni: fix build clean on Ubuntu

The $(comma) variable is not defined in this Makefile, nor in
any included Makefile. Seen while doing a "make clean" on ubuntu:

  $ make clean
  == Clean lib
  == Clean lib/librte_compat
  == Clean lib/librte_eal
  == Clean lib/librte_eal/common
  == Clean lib/librte_eal/linuxapp
  == Clean lib/librte_eal/linuxapp/eal
  == Clean lib/librte_eal/linuxapp/igb_uio
  == Clean lib/librte_eal/linuxapp/kni
  tr: missing operand after ‘.-’
  Two strings must be given when translating.
  Try 'tr --help' for more information.

This commit replaces $(comma) by a ',' character, it's not a problem in
that case since we are inside antiquotes.

Fixes: a09b359daca3 ("kni: fix build on Ubuntu 14.04")

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by Ferruh Yigit <ferruh.yigit@intel.com>

8 years agomk: fix cross-compilation
Jerin Jacob [Thu, 26 May 2016 11:20:14 +0000 (16:50 +0530)]
mk: fix cross-compilation

Removed comparison against $CC in Makefiles as
in cross-compiling mode CC can be a different string
instead of string "gcc"

Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
8 years agodoc: fix typo in FreeBSD guide
Pablo de Lara [Thu, 19 May 2016 14:39:20 +0000 (15:39 +0100)]
doc: fix typo in FreeBSD guide

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
8 years agodoc: add pep8 as the python code style guidelines
John McNamara [Fri, 27 May 2016 14:57:15 +0000 (15:57 +0100)]
doc: add pep8 as the python code style guidelines

Added PEP8 to the DPDK Coding Style guidelines to cover Python
contributions to DPDK.

Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
8 years agoscripts: check commits with checkpatch
Thomas Monjalon [Thu, 2 Jun 2016 09:13:15 +0000 (11:13 +0200)]
scripts: check commits with checkpatch

The new option -n allows to give a number of commits to check
from the git HEAD.
If neither -n nor patch files are given, the commits after
origin/master are checked.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
8 years agoeal/x86: fix clang build with -O0
Damjan Marion [Fri, 3 Jun 2016 08:15:23 +0000 (10:15 +0200)]
eal/x86: fix clang build with -O0

Clang seems to have a bug with asm inside inline function rte_xabort():

rte_rtm.h:56:15: error: invalid operand for inline asm constraint 'i'
        asm volatile(".byte 0xc6,0xf8,%P0" :: "i" (status) : "memory");
                     ^

It is seen only when building with EXTRA_CFLAGS=-O0.

The workaround is to replace the inline function by a macro.

Fixes: ba7468997ea6 ("spinlock: add HTM lock elision for x86")

Signed-off-by: Damjan Marion <damarion@cisco.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
8 years agoapp/test: fix buffer overflow
Jan Viktorin [Tue, 3 May 2016 19:15:27 +0000 (21:15 +0200)]
app/test: fix buffer overflow

A bug has been detected by valgrind:

Invalid write of size 1
   by 0x86ECC76: sprintf (in /usr/lib/libc-2.23.so)
   by 0x430B0A: commands_init (in build/app/test)
   by 0x42F215: main (in build/app/test)
 Address 0x9d72ff2 is 0 bytes after a block of size 1,346 alloc'd
   at 0x78C1BD0: malloc (in vgpreload_memcheck-amd64-linux.so)
   by 0x430AE4: commands_init (in build/app/test)
   by 0x42F215: main (in build/app/test)

The commands buffer is exactly 1346 B long so there is an access just
after the buffer. The sprintf always writes '\0' at the end of the string.
The '#' separator adds 1 B more to each string. This is correct until the
last string is sprinted there. The last one is 1 B longer then expected,
i.e.:
      strlen(t->command) + strlen("#") + ONE_FOR_ZERO

Fixes: 727909c59231 ("app/test: introduce dynamic commands list")

Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: David Marchand <david.marchand@6wind.com>
8 years agoapp/test: move cycles autotest to first group
Thomas Monjalon [Wed, 11 May 2016 12:52:16 +0000 (14:52 +0200)]
app/test: move cycles autotest to first group

The cycles test was wrongly in the group of mempool perf test.
It is moved in parallel test group 1 with timer test.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
8 years agoapp/test: remove unused constants
Thomas Monjalon [Wed, 11 May 2016 06:39:09 +0000 (08:39 +0200)]
app/test: remove unused constants

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
8 years agoapp/test: reduce memory needs
Thomas Monjalon [Thu, 5 May 2016 06:49:49 +0000 (08:49 +0200)]
app/test: reduce memory needs

Adjust memory parameter (--socket-mem) of the autotests
to be able to make fast_test in a constrained environment (e.g. a VM).

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>