ixgbe/base: use mac-dependent values

This patch changes code to use registers offsets stored in mvals table
instead of values defined statically.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

ixgbe/base: add flow director drop queue

This patch adds ixgbe_set_fdir_drop_queue_82599 for enabling and
setting flow director drop queue, and adds sets drop no match in
ixgbe_init_fdir_perfect_82599 for x550.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

ixgbe/base: remove wait and check flow director signature addition

Waiting for FDIRCMD completion is an expensive thing to do in the
transmit hot path. This wait was added to catch problems with perfect
filter rules, and, at least in the Linux driver, there is no error
check anyway, so there is no point to adding the delay. So do not wait
for completion. Change the return of the function to void, since it has
no meaningful return value.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

ixgbe/base: add flow control ethertype for filtering

This patch adds the flow control ethertype to the defines for the
ETQF filter list. This only adds the define. Each driver
can add this ethertype to the filter. This is needed to prevent
denial of service by malicious VFs sending out flow control
packets.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

ixgbe/base: fix Tx hang in CEE mode

Currently credit_refill and credit_max could be zero for a TC and that
is causing Tx hang for CEE mode configuration, so to fix that have at
min credit assigned to a TC and that is as what IEEE mode already does.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

ixgbe/base: update readme

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

doc: fix missing link target in Linux guide

Fix missing link in the Linux GSG, accidentally removed
in previous merge:

WARNING: undefined label: linux_gsg_compiling_dpdk

Fixes: 29c673401c4d ("doc: improve Linux guide layout")

Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>

doc: remove DPDK from guide titles

In HTML and PDF guides, it is clear in the header that the doc
is related to the DPDK.
So "DPDK" is redundant and can be removed from FAQ and release notes
titles to improve consistency.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

doc: init next release notes

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

version: 2.3.0-rc0

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

version: 2.2.0

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

app/testpmd: fix dead code

Coverity issue (CID 119254): Control flow issues (DEADCODE).

Fixes: 1a572499beb6 ("app/testpmd: setup DCB forwarding based on traffic class")

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

i40e: fix flow director index sign

Coverity issue reported like
CID 119268 (#1 of 1): Unintended sign extension
(SIGN_EXTENSION)sign_extension: Suspicious implicit sign extension:
vsi_id with type unsigned short (16 bits, unsigned) is promoted in
vsi_id << 23 to type int (32 bits, signed), then sign-extended to type
unsigned long (64 bits, unsigned). If vsi_id << 23 is greater than
0x7FFFFFFF, the upper bits of the result will all be 1.

Fixes: 88ebc2b7f976 ("i40e: extend flow director to support VF")

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

i40e: fix max frame size

In FreeBsd driver, the max frame size is changed to MTU, but not
keep the default value defined in DataSheet. When DPDK runs on that
NIC, the configured value is not expected.
This patch sets the max frame size to default when initialization.

Fixes: 4861cde46116 ("i40e: new poll mode driver")

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>

ixgbe: restore imissed stat counter

This counter was left unmodified. Restore it in ixgbe_dev_stats_get.

The ierrors counter still includes imissed for ixgbe. This behaviour is
not consistent amongst all drivers. Another patch may be needed to unify
the meaning of the ierrors counter.

Fixes: 5e50ad1c1b63 ("ixgbe: add specific stats")

Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>

doc: fix ABI change announce for RETA configuration

Replace "entries" by "queues", it clarifies the case.

Fixes: bd3cea78abd8 ("doc: announce ABI change for RETA configuration")

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>

doc: announce ABI change for extending filtering

Current filtering support will be enhanced to accommodate support
for Chelsio T5 hardware filtering support.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

scripts: fix ABI validator when revision is a tag

Commit 9cbae2aa64eb managed to break the only previously supported
case where a tag is used as a revision, due to git show output
differing between tags and other objects. The hash is on the last
line of the output in both cases though so just grab that.

Fixes: 9cbae2aa64eb ("scripts: support any git revisions as ABI validation range")

Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>

doc: improve Linux guide layout

Fixed Linux Getting Started Guide rst layout to improve
rendering in PDF.

Signed-off-by: John McNamara <john.mcnamara@intel.com>

doc: fix -n option in FreeBSD guide

Fix EAL usage to indicate that -n is, now, optional.

Signed-off-by: John McNamara <john.mcnamara@intel.com>

doc: improve FreeBSD guide layout

Fixed FreeBSD Getting Started Guide rst layout to improve
rendering in PDF.

Signed-off-by: John McNamara <john.mcnamara@intel.com>

doc: remove unused references from faq

The faq refers to Linux*, with an asterisk, without any equivalent
note or footnote. This is a legacy from older versions of the docs.
This update removes it.

Signed-off-by: John McNamara <john.mcnamara@intel.com>

doc: clean up index files

Remove **Contents** and |Today| from the rst doc index files since
these are already added automatically to PDF files and are of
little value to the Html files where the Contents is shown in a
sidebar.

Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>

doc: fix rendering of design section

Fix minor rst doc issues in the contributing/design.rst doc to correct
rendering of notes and code blocks.

Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>

doc: fix spellings

Fix various spellings in rst docs.

Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>

doc: add statistics fixes in release notes

This patch updates the release notes to include the changes
made (by me), which were not appropriately documented at the time.
Hence, this patch fixes a number of missing docs,

Fixes: e81a315e5dc5 ("ixgbe: add MAC short packet discard count to Rx errors")
Fixes: 48dd1a82a615 ("ixgbe: remove mac fault counts from Rx errors")
Fixes: 256ff05a9cae ("ixgbe: fix Rx errors statistics for UDP checksum")

Also, the CRC byte removal was not added to release notes, so
Fixes: 156c5a8cf913 ("e1000: remove CRC size from byte counters")
Fixes: c03fcee9abbd ("ixgbe: remove CRC size from byte counters")
Fixes: 0834d1524dee ("i40e: remove CRC size from byte counters")

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

ethdev: remove old flow director symbols

The API has been removed but the symbols were still declared in the map.

Fixes: a421b86a4a02 ("ethdev: remove old flow director API")

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

eal: remove zombie symbols

test_mp_secondary was initially added by mistake.
rte_snprintf has been removed.

Fixes: 9d41beed24b0 ("lib: provide initial versioning")
Fixes: 3185322809c1 ("eal: remove rte_snprintf")

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

doc: announce ABI change for link speed

A rework was prepared by Marc Sune:
http://dpdk.org/ml/archives/dev/2015-October/026037.html
The goal is to retrieve the supported link speed of a device
and to allow 100G devices while having a consistent API.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Jan Viktorin <viktorin@rehivetech.com>
Acked-by: Matej Vido <matejvido@gmail.com>

doc: announce ABI change for tunnel filtering

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

doc: announce ABI change for flow director

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Andrey Chilikin <andrey.chilikin@intel.com>

doc: announce ABI change for RETA configuration

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>

doc: announce ABI change for cmdline buffer size

Current buffer size are not enough for a few testpmd commands.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>

doc: fix release notes for 2.2

Fix grammar, spelling and formatting of DPDK 2.2 release notes.

Signed-off-by: John McNamara <john.mcnamara@intel.com>

mlx: fix typos and inaccuracies in docs

Signed-off-by: Olga Shern <olgas@mellanox.com>

doc: add patch submit cheatsheet

This patch adds the patch submission cheatsheet to
the contributers guide. Both HTML and PDF docs show
the cheatsheet on its own page.

Right clicking the SVG image in the HTML doc allows
for viewing the image on its own, useful for printing
in high quality.

The exact appearance of of the cheatsheet will depend
on the default monospace font installed.

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>

doc: add contributors guide

Add a document to explain the DPDK patch submission and review process.

Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>

scripts: add help for build testing

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

examples/ip_pipeline: add sample configurations and scripts

This patch includes the configuration and script files of the some
applications which can be built using DPDK Packet Framework. A
configuration file defines the application structure which include
packet processing stages (knowns as pipelines), their connectivity
and other parameters necessary to start and run the application. A
script file specifies CLI commands required for loading table entries
(rules/routes, etc). The configuration/script files for simple
applications such as l2 forwarding, l3 forwarding have been presented.
In addition, to demonstrate the use and inter-connectivity of various
pipeline modules (which are avilable in packet framework), a complex
packet processing workload i.e. edge router is considered. The
configuration of the pipeline stages used for upstream and downstream
flow processing has been specified separately in two configuration
files. All these configuration and script files don't affect the
compilation.

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>

bonding: fix reordering of IP fragments

Fragmented IPv4 packets have no TCP/UDP headers, so we hashed
random data introducing reordering of the fragments.

Signed-off-by: Andriy Berestovskyy <aber@semihalf.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>

bonding: fix LACP mempool size

The following messages might appear after some idle time:
"PMD: Failed to allocate LACP packet from pool"

The fix ensures the mempool size is greater than the sum
of TX descriptors.

Signed-off-by: Andriy Berestovskyy <aber@semihalf.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>

doc: add known VF issue when PF is reset

Add a known issue to warn that PF reset event/request is not
handled by any VF drivers till 2.2, and which should be fixed
in the future.

Reported-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Helin Zhang <helin.zhang@intel.com>

examples: skip unsupported ethtool and l3fwd-power on FreeBSD

Userspace ethtool and l3fwd-power not support FreeBSD.
So skip them when build samples.

Signed-off-by: Marvin Liu <yong.liu@intel.com>

version: 2.2.0-rc4

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

examples/ip_pipeline: update release notes

This patch updates the release notes with the features
added to ip_pipeline application.

Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>

examples/vhost: fix guide

Fix typos in sample console commands.
Remove "user@target:~$" prefixes in command lines.

Add --socket-mem 1024 to vhost-switch command lines.
Without the --socket-mem parameter all hugepages will be allocated
to vhost-switch, leaving no memory for the VM.

Add --disable-hw-vlan-filter parameter to testpmd command lines.
Without this parameter testpmd fails on startup in the VM.

Increase value of --sock-mem parameter to testpmd as original
value was too small.

Fixes: d0dff9ba445e ("doc: sample application user guide"
Fixes: 9bc23cb8209c ("doc: add vhost-user to sample guide")
Fixes: 43866bf71d58 ("doc: fix vhost sample parameter")

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>

vhost: note the ABI changes

Note the ABI changes and update the ABI version to 2.

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>

szedata2: note limited current support in guide

Add note to the documentation that only x86_64 versions of the external
libraries are currently provided.

Signed-off-by: Matej Vido <matejvido@gmail.com>

mlx: add known issues in release notes

Signed-off-by: Olga Shern <olgas@mellanox.com>

mlx4: update features and fixes in release notes

Signed-off-by: Olga Shern <olgas@mellanox.com>

mlx5: update documentation

- Update features, limitations, configuration and prerequisites sections.
- Add a note to describe RSS behavior differences with librte_pmd_mlx4 in
  testpmd.

Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

mlx4: update documentation

-Split "Features" and "Limitations" sections.
-Update limitations with missing information.
-Update prerequisites with supported MLNX_OFED release, firmware and
 CPU architectures.
-Enhance usage example with openibd script.

Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>

enic: add guide

Signed-off-by: John Daley <johndale@cisco.com>

fm10k: add guide

This documentation covers introductions and limitations on Intel
FM10000 series products.

Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

i40e: add X722 support to release notes

Updated release notes about adding X722 support.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>

i40e: add base driver update to release notes

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

e1000: add interrupt limitations in guide

Update interrupt related limitations for e1000em nic.
It only support one interrupt source and not support auto-clear.

Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

e1000: add base driver update to release notes

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

doc: add NIC performance guide on Linux IA

Add a new guide doc as part of the Linux Getting Started Guide.

The document is a step-by-step guide on how to get high performance
with DPDK on an Intel platform.

It is designed for users who are not familiar with DPDK but would like
to get the best performance with NICs.

Signed-off-by: Qian Xu <qian.q.xu@intel.com>

doc: increment minimum Linux kernel requirement

Update the documentation to reflect that the minimum Linux kernel
requirement for DPDK 2.2 has increased from 2.6.33 to 2.6.34.

Compatibility with kernel 2.6.33 was dropped, after discussion on
the mailing list, in the following commit:
2e6e9e215703 ("igb_uio: use existing PCI macros")

Signed-off-by: John McNamara <john.mcnamara@intel.com>

doc: link examples to API

Enable Doxygen parsing of DPDK example files so that the example
code is linked to and from the API docs. This allows the reader
to see examples of API usage in context by following a link.

Signed-off-by: John McNamara <john.mcnamara@intel.com>

doc: change theme of guides

Change the Sphinx default theme from "alabaster" to the ReadTheDocs
theme. See for example:
    http://dpdk.readthedocs.org/en/latest/

This looks better for technical documentation and in particular
it has a 80 char wide verbatim block rendering.

Also add logos for the html and latex docs.

Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>

doc: remove dejavu font requirement

Remove requirement for occasionally hard to find/install
DejaVuSansMono font. It isn't gnerally required anyway.
The default mono font is sufficient.

Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>

doc: turn off permalink symbols in html guides

Turn off the permalink symbol in the Sphinx generated html docs.
This is a distracting mouseover when reading the docs and links
to sections can still be obtained from the doc index.

Signed-off-by: John McNamara <john.mcnamara@intel.com>

doc: add readme file

This project is missing a proper README which is used in
other projects and some git visualization services.
Only a starting point, please feel free to edit.
To keep the file short and current, I avoided putting any specific
information about features and versions.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: John McNamara <john.mcnamara@intel.com>

examples/ip_pipeline: fix parsing error code

Coverity issue: 107136
Fixes: 7f64b9c004aa ("examples/ip_pipeline: rework config file syntax")

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

examples/ip_pipeline: fix buffer overrun

Coverity issue: 107127
Fixes: 7f64b9c004aa ("examples/ip_pipeline: rework config file syntax")

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

examples/ip_pipeline: fix logically dead node

Coverity issue: 107109
Fixes: 7122d30131ad ("examples/ip_pipeline: rework flow classification pipeline")

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

examples/ip_pipeline: fix copy-paste error

Coverity issue: 107104
Fixes: 7f64b9c004aa ("examples/ip_pipeline: rework config file syntax")

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

examples/ip_pipeline: fix buffer copy size

Coverity issue: 107133
Fixes: eb32fe7c5574 ("examples/ip_pipeline: rework initialization parameters")

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>

examples/ip_pipeline: fix buffer size warning

Coverity issue: 107102
Fixes: 7f64b9c004aa ("examples/ip_pipeline: rework config file syntax")

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

vhost: fix logically dead code

CID 107107 (#1 of 1): Logically dead code
Fixes: af4f2c5feb2e ("vhost: fix code style")

Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

vhost: fix missed unlock

CID 107113 (#1 of 1): Missing unlock (LOCK)5. missing_unlock: Returning
without unlocking pfdset->fd_mutex.
Fixes: fbf7e07ca142 ("vhost: add select based event driven processing")

Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

vhost: fix missed break in switch

CID 107114 (#1 of 1): Missing break in switch
Fixes: 8f972312b8f4 ("vhost: support vhost-user")

Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

vhost: fix out-of-bounds read

CID 107126 (#1 OF 1): Out-of-bounds read
Fixes: 8f972312b8f4 ("vhost: support vhost-user")

Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

bnx2x: add maintainers

Add maintainers for BNX2X PMD.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

bnx2x: add version

Add BNX2X PMD version, print it as part of adapter info.
Adjusted print adapter info output formatting.

This patch versions BNX2X PMD at 1.0.0.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

bnx2x: fix 32-bit build

Compile tested.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

bnx2x: fix build on FreeBSD

Compile tested.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

bnx2x: add license file

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

bnx2x: add guide

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

bnx2x: add periodic debug option

The periodic debug option is used to collect periodic
events like statistics, register access etc and won't
interfere with user-level messages.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

bnx2x: fix build with clang

Fix for the following clang build error:
drivers/net/bnx2x/elink.c:10384:41: error: shifting a
      negative signed value is undefined [-Werror,-Wshift-negative-value]
                vars->eee_status &= ~SHMEM_EEE_1G_ADV <<
                                    ~~~~~~~~~~~~~~~~~ ^

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

bnx2x: update VF to support newer PF drivers

SR-IOV is supported using bnx2x poll mode driver running as VF driver and
native linux driver running as PF (in host/hypervisor). There is no issue
while running with the PF driver which is at the base version as that of
PMD. However, there is a compatibility issue between newer out-of-box PF
drivers with older VF driver. So the newer VFs would also need to send
BNX2X_VF_TLV_PHYS_PORT_ID (among other TLVs) to differentiate between
newer and older VFs.

Signed-off-by: Harish Patil <harish.patil@qlogic.com>

bnx2x: skip Rx producer refresh when no packet

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

bnx2x: fix Tx error check

Correct the error check in PMD transmit routine.

Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>

bnx2x: fix restart

If you stop and start the driver, the rx queue will have the previous
index values when programming the adapter.  Therefore, we should always
reset the queue indices when the rx ring is setup.  Note:  We need to
clear (write) the status block's completion queue index since it is
possibly in a read cache.

Tidy some init code to make it clearer what the defaults are.

Signed-off-by: Chas Williams <3chas3@gmail.com>

cxgbe: fix Rx queue setup error management

When refilling freelists for the first time and if it fails, the rxq
is freed and returns ENOMEM. There is a check while freeing hardware rxq
to pass freelist context id if the freelist exists or 0xffff otherwise.
The error path is only reached if freelist exists. So, fix is to remove
the useless check for freelist existence.

Coverity issue: 107108
Fixes: 92c8a63223e5 ("cxgbe: add device configuration and Rx support")

Reported-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: John McNamara <john.mcnamara@intel.com>

xenvirt: fix build for 32-bit platform

Reported-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Jianfeng Tan <jianfeng.tan@intel.com>

eal/linux: fix Rx interrupt read error management

In eal_intr_proc_rxtx_intr, negative value may be used as argument to
a function expecting a positive value. If 'read' returns EAGAIN as
example, the bytes_read updates to a negative value which continue
be passed as argument for the next 'read'.

Coverity issue: 107115

Function read(fd, &buf, bytes_read) returns a negative number.
Assigning: signed variable bytes_read = read.
CID 107115 (#1 of 1): Argument cannot be negative
(NEGATIVE_RETURNS) bytes_read is passed to a parameter
that cannot be negative.
    bytes_read = read(fd, &buf, bytes_read);

Fixes: c9f3ec1a0f3f ("eal/linux: add Rx interrupt control function")

Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>

examples/netmap_compat: fix build on Suse 11

 examples/netmap_compat/bridge/../lib/compat_netmap.c:880:41:
 error: ‘POLLRDNORM’ undeclared (first use in this function)

The root casue is POLLRDNORM is more-or-less nonstandard, and it
depends on macro "__USE_XOPEN".

In suse11 sp3, POLLRDNORM will not be defined because "__USE_XOPEN"
issue.

This patch add check if it is not defined, define it.

Fixes: 06371afe394d (examples/netmap_compat: import netmap compatibility example)

Signed-off-by: Michael Qiu <michael.qiu@intel.com>

examples/performance-thread: fix return sign

The patch fixes an inverted return value in the
cond_destroy and cond_init APIs of the pthread shim
example.

These APIs are now demonstrated in the sample app by
having the mutexes and condition variables
explicitly destroyed before the appplication terminates.

Fixes: 433ba6228f9a77a9b5f4 ("add pthread_shim app")

Signed-off-by: Ian Betts <ian.betts@intel.com>

scripts: fix relpath.sh output when $prefix is set in environment

When relpath.sh is called from install target with prefix set, eg
"make install DESTDIR=/tmp/dpdk-root prefix=/usr", the prefix
from the environment leaks to relpath.sh internal helper variable and
causes incorrect symlinks to be generated in sdk $(targetdir):

   include -> /usr../../../include/dpdk
   lib -> /usr../../../lib

Initialize the local variable to empty to avoid side-effects from
environment.

Fixes: 6b62a72a70d0 ("mk: install a standard cutomizable tree")

Signed-off-by: Panu Matilainen <pmatilai@redhat.com>

mbuf_offload: mark experimental state

Cryptodev was marked experimental and mbuf_offload depends on it.
The mbuf_offload library is one of the crypto area which requires
some discussions before having a stable API.

The experimental mark is also added to rte_cryptodev_configure()
to be sure one cannot miss it.

Fixes: 66874e55f550 ("cryptodev: mark experimental state")

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>

examples/performance-thread: mark as experimental

This commit removes the performance thread example from
examples/Makefile, and marks the example as "experimental"
in the release note, and it its API headers files.

Signed-off-by: Ian Betts <ian.betts@intel.com>

examples/performance-thread: add pthread_shim app

This commit adds an example that illustrates how to implement
a pthread shim with the lthread subsystem included in the
performance thread example application.

Signed-off-by: Ian Betts <ian.betts@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>

examples/performance-thread: add l3fwd-thread app

This commit adds an L3 forwarding application to the performace-thread
example.

Signed-off-by: Ian Betts <ian.betts@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>

examples/performance-thread: add lthread subsystem

This commit adds the lightweight thread subsystem used by the
performance-thread sample applications.

Signed-off-by: Ian Betts <ian.betts@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>

doc: add guide for performance-thread example

This commit adds the sample application user guide for the
performance thread sample application.

Signed-off-by: Ian Betts <ian.betts@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>

examples/vhost: reduce number of hugepages needed

Add #ifndef MAX_QUEUES to change MAX_QUEUES at compile time if needed.
Change MAX_QUEUES from 512 to 128 to reduce the number of hugepages
required by the vhost-switch program.

To change MAX_QUEUES add '-D MAX_QUEUES=512' to the EXTRA_CFLAGS variable,
before building the application.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>