Matan Azrad [Wed, 2 Aug 2017 19:00:50 +0000 (22:00 +0300)]
net/mlx4: workaround verbs error after plug-out
Current mlx4 OFED version has bug which returns error to
ibv destroy functions when the device was plugged out, in
spite of the resources were destroyed correctly.
Hence, failsafe PMD was aborted, only in debug mode, when
it tries to remove the device in plug-out process.
The workaround added option to replace all claim_zero
assertions with debugging messages, by the way, this option
affects non ibv destroy assertions.
DPDK 18.02 release should work with Mellanox OFED-4.2 which will
include the verbs fix to this bug, then, this patch can
be removed.
Aaron Conole [Wed, 2 Aug 2017 18:02:13 +0000 (14:02 -0400)]
net/enic: fix crash when freeing 0 packet to mempool
Occasionally, the amount of packets to free from the work queue ends
perfectly on a boundary to have nb_free = 0 and pool = 0. This causes
a segfault as follows:
(gdb) bt
#0 rte_mempool_default_cache
#1 rte_mempool_put_bulk (n=0, obj_table=0x7f10deff2530, mp=0x0)
#2 enic_free_wq_bufs (wq=wq@entry=0x7efabffcd5b0,
completed_index=completed_index@entry=33)
#3 0x00007f11e9c86e17 in enic_cleanup_wq (enic=<optimized out>,
wq=wq@entry=0x7efabffcd5b0)
at /usr/src/debug/openvswitch-2.6.1/dpdk-16.11/drivers/net/enic/enic_rxtx.c:442
#4 0x00007f11e9c86e5f in enic_xmit_pkts (tx_queue=0x7efabffcd5b0,
tx_pkts=0x7f10deffb1a8, nb_pkts=<optimized out>)
at /usr/src/debug/openvswitch-2.6.1/dpdk-16.11/drivers/net/enic/enic_rxtx.c:470
#5 0x00007f11e9e147ad in rte_eth_tx_burst (nb_pkts=<optimized out>,
tx_pkts=0x7f10deffb1a8, queue_id=0, port_id=<optimized out>)
This commit makes the enic wq driver match other drivers who call the
bulk free, by checking that there are actual packets to free.
Fixes: 36935afbc53c ("net/enic: refactor Tx mbuf recycling") CC: stable@dpdk.org Reported-by: Vincent S. Cojot <vcojot@redhat.com>
Reported-at: https://bugzilla.redhat.com/show_bug.cgi?id=1468631 Signed-off-by: Aaron Conole <aconole@redhat.com> Reviewed-by: John Daley <johndale@cisco.com>
Qi Zhang [Wed, 2 Aug 2017 07:22:09 +0000 (15:22 +0800)]
net/i40e: fix Rx data segment buffer length
Buffer length be configured for each data segment should not exceed
the requested value, or device may fill data that exceed the boundary
of memory that be reserved.
Fixes: 4861cde46116 ("i40e: new poll mode driver") Cc: stable@dpdk.org Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com> Reviewed-by: Mark Kavanagh <mark.b.kavanagh@intel.com> Tested-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Gaetan Rivet [Thu, 3 Aug 2017 15:08:34 +0000 (17:08 +0200)]
net/failsafe: fix blank line parsing
When the output of an exec() slave definition is only a single newline
character, the fail-safe currently fails to parse the device with the
value returned by the rte_devargs library.
This behavior is incorrect, because the fail-safe should make a
difference between the absence of a device, and an erroneous device
declaration.
Fix the output sanitization in the case where no newline was at its end
and detect the special case of an absent device. The correct error code
is then returned.
When there is no preferred device, failsafe will always
try to scan for preferred device. And if there is no device
found with the exec option, popen() will get an empty output.
In this case, it was forgotten to close the file descriptor.
It is fixed by closing the file descriptor even if the output is empty.
Tiwei Bie [Tue, 1 Aug 2017 09:01:21 +0000 (17:01 +0800)]
vhost: make page logging atomic
Each dirty page logging operation should be atomic. But it's not
atomic in current implementation. So it's possible that some dirty
pages can't be logged successfully when different threads try to
log different pages into the same byte of the log buffer concurrently.
This patch fixes this issue.
Fixes: b171fad1ffa5 ("vhost: log used vring changes") Cc: stable@dpdk.org Reported-by: Xiao Wang <xiao.w.wang@intel.com> Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Gaetan Rivet [Thu, 3 Aug 2017 12:34:31 +0000 (14:34 +0200)]
eal: fix leak on hotplug parsing error
If rte_eal_devargs_parse fails, the rte_devargs has not yet been inserted
in the global list. When jumping to err_devarg, the removal fails and it
is not properly freed.
Free the allocated rte_devargs if its removal failed.
Gaetan Rivet [Wed, 2 Aug 2017 17:12:07 +0000 (19:12 +0200)]
devargs: fix policy check when adding arguments
Do not fail upon detecting a set bus configuration when adding an
rte_devargs. i.e. adding a blacklisted PCI device while the bus is
configured in whitelist mode.
This failure condition has been introduced when the bus policies
were implemented. This implementation however was meant to strictly
follow the existing API. This check was not and should not be performed
until the current API has been properly deprecated.
The same kind of check is already done when parsing EAL options.
Fixes: 02823c1db0bc ("devargs: parse bus policies") Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Gaetan Rivet [Wed, 2 Aug 2017 17:10:22 +0000 (19:10 +0200)]
eal: read and parse device option separately
When the EAL parses the common options given to the application,
not all subsystems are available. Some device drivers are registered
afterward upon dynamic plugin loading.
Devices using those drivers are thus unable to be parsed by any drivers
and are rejected.
Store the device options first and keep them for later processing.
Parse these right before initializing the buses, the drivers must have
been stabilized at this point.
Thomas Monjalon [Thu, 3 Aug 2017 13:53:50 +0000 (15:53 +0200)]
doc: notify libnuma dependency in release notes
Fixes: 066731939589 ("doc: add libnuma as dependency") Signed-off-by: Thomas Monjalon <thomas@monjalon.net> Acked-by: John McNamara <john.mcnamara@intel.com>
Harry van Haaren [Wed, 12 Jul 2017 13:38:52 +0000 (14:38 +0100)]
doc: add author on cc to git fixline alias
With this commit, the correct method to use git fixline to indicate
a fix of a previous commit has changed. The new rules require the
author of the original code that is being fixed to be on CC.
The logic behind this improvement is that if there is a genuine bug,
one of the ideal people to review is the author of the original code
being fixed. Adding them on Cc makes them aware of the patch, avoiding
it from being passed by accidentally while reading the mailing-list.
Given that the original author (now on Cc:) might not actually review,
there is no value in keeping the Cc: in git commit history. If the
original author performs a review, their Reviewed-by: or Acked-by: is
stored in git history (same as now).
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Acked-by: John McNamara <john.mcnamara@intel.com> Acked-by: Thomas Monjalon <thomas@monjalon.net>
Thomas Monjalon [Sat, 15 Jul 2017 10:00:33 +0000 (12:00 +0200)]
devtools: add script to find duplicated includes
Based on Stephen's idea (originally implemented in a Perl script),
this is a shell script to find duplicated includes in a file.
It looks for all the .c and .h files of the git repository.
It is fast enough because automatically well parallelized.
Suggested-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Thomas Monjalon <thomas@monjalon.net> Tested-by: Keith Wiles <keith.wiles@intel.com>
Thomas Monjalon [Mon, 31 Jul 2017 12:07:38 +0000 (14:07 +0200)]
devtools: ignore non merged tags for backport
When checking if a buggy commit was introduced in an old version,
the script compares last tag containing the bug and current version.
The non merged tags from non related branches must be ignored.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The Linux Getting Started Guide contains
parts which are specific for i40e PMD. This results
in confusion for users which read the guide at their
first try with DPDK.
Moving those parts to the i40e NIC manual.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com> Acked-by: John McNamara <john.mcnamara@intel.com>
mk: use extra cflags when linking libs with compiler
When using the compiler to link libraries, include EXTRA_CFLAGS. This is
needed when cross-compiling to pass --sysroot, for example. GCC
cross-compilers built with Yocto don't use the --with-sysroot option,
making it necessary to pass the --sysroot command-line option.
This is the same solution as in commit e8fbb6d9cfd9 ("mk: use extra cflags
when linking with compiler"), but applied to libs instead of apps.
Pablo de Lara [Mon, 31 Jul 2017 04:40:37 +0000 (05:40 +0100)]
examples/l2fwd-crypto: fix possible out-of-bounds
rte_cryptodev_socket_id() returns the socket id of
a crypto device, unless the device id is not valid,
in which case, it returns -1.
This should not happen, as the device id is controlled
by the application, but just for safety, a check is added.
Coverity issue: 158628, 158638, 158656, 158662 Fixes: b3bbd9e5f265 ("cryptodev: support device independent sessions") Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Harry van Haaren [Mon, 31 Jul 2017 16:38:55 +0000 (17:38 +0100)]
service: fix shifts to operate on 64-bit integers
This commit fixes shifts to an integer (1 << shift) which
is assumed to be a 32-bit integer. In this case, the shift is
variable and expected to be valid for 64-bit integers. Given that
the expectation to work with 64 bits exists, we must ensure that
the (1 << shift) one in that formula is actually a uin64_t.
The UINT64_C() macro portably adds the correct suffix to a constant,
informing the compiler that the value is to be assigned 64 bits.
The issue would only manifests when there were greater than 31
services registered.
Fixes: 21698354c832 ("service: introduce service cores concept") Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
'commit 4c4bdadfa9e7 ("net/qede: refactoring multi-queue implementation")'
introduced a regression where default RSS configuration is incorrect in
the case of 100G mode. Currently we are passing absolute queue ids while
creating RX/TX queues. But in CMT mode we need to provide queue id
relative to the engine id. So this fix takes into account num_hwfns
while creating queues.
net/qede/base: fix recovery from previous ungraceful exit
This patch modifies the recovery flow to allow ongoing PCIe
transactions to be completed. To achieve this, the load sequence is
changed such that the "final_cleanup" notification is sent while the
FID_enable is cleared.
This change ensures that the chip cleanup actions takes place from
previous driver instance if needed.
The corrupted code doesn't return error when probe function
fails due to error in device mac address getting.
By this way, the probe function may return success even if the
ETH dev is not allocated.
Hence, the probe caller, for example failsafe PMD, fails when it
tries to get ETH dev after the device was plugged out while mlx4
was probing it.
The fix adds error report to the probe caller when priv_get_mac fails
and in all other failure options which are missing it.
By this way, it prevents the unexpected behavior to miss ETH device
after the device was probed successfully.
Fixes: 7fae69eeff13 ("mlx4: new poll mode driver") Fixes: 001a520e419f ("net/mlx4: add port parameter") Fixes: 7b0661539229 ("mlx4: check if port is configured for ethernet") Fixes: fec3608673e6 ("mlx4: query netdevice to get initial MAC address") Cc: stable@dpdk.org Signed-off-by: Matan Azrad <matan@mellanox.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The corrupted code causes segmentation fault when user creates
flow with drop action before device starting.
For example, failsafe PMD recreates all the flows before calling
dev_start in plug-in sequence and mlx4 allocated its flow drop
queue in dev_start.
Hence, when failsafe created flow with drop action after plug-in
event, mlx4 tried to dereference flow drop queue which was
uninitialized.
The fix added check to the drop qp accessible and conditioned the
ibv_create_flow calling on device starting.
Fixes: 642fe56a1ba5 ("net/mlx4: use a single drop queue for all drop flows") Fixes: 46d5736a7049 ("net/mlx4: support basic flow items and actions") Cc: stable@dpdk.org Signed-off-by: Matan Azrad <matan@mellanox.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When advancing Tx ring index (txq->wqe_ci) in txq_scatter_v(), the title
descriptor of multi-packet send isn't taken into account if it doesn't
cross 64B boundary.
mlx5_tx_complete() polls completion queue multiple times until it
encounters an invalid entry. As Tx completions are suppressed by
MLX5_TX_COMP_THRESH, it is waste of cycles to expect multiple
completions in a poll. And freeing too many buffers in a call can
cause high jitter.
This patch improves throughput a little.
Herbert Guan [Thu, 13 Jul 2017 08:00:36 +0000 (16:00 +0800)]
test/bonding: fix parameters of a balance Tx
When test case "test_balance_l23_tx_burst_ipv4_toggle_ip_addr" is
calling balance_l23_tx_burst(), the ip_addr instead of mac_addr
should be toggled according to the test name.
Fixes: 92073ef961ee ("bond: unit tests") Cc: stable@dpdk.org Signed-off-by: Herbert Guan <herbert.guan@arm.com> Acked-by: Jianbo Liu <jianbo.liu@linaro.org> Acked-by: Declan Doherty <declan.doherty@intel.com>
Herbert Guan [Mon, 10 Jul 2017 11:13:46 +0000 (19:13 +0800)]
test/bonding: fix memory corruptions
There were double-free problems in some test cases, which will cause
a duplicated mbuf will be added into mempool. After double-free,
some new allocated mbuf will hold a same address and thus cause the
memory corruption.
Another minor issue is that in some test cases, allocated mbuf will
not be released after test case exits. Hopefully these leaked mbuf
will be released by the next test case in its setup phase when
stopping the virtual pmd ports, while this do is a memory leak of
the exited test case.
To fix above 2 issues, this patch will do:
1) Release virtual pmd ports' tx queue in the clean up function
remove_slaves_and_stop_bonded_device() of each test cases.
2) Do not release allocated mbufs for test bursts. These mbufs
will be released in remove_slaves_and_stop_bonded_device() when
test case exits.
Fixes: 92073ef961ee ("bond: unit tests") Signed-off-by: Herbert Guan <herbert.guan@arm.com> Acked-by: Declan Doherty <declan.doherty@intel.com>
Tomasz Kulasek [Wed, 26 Jul 2017 15:46:07 +0000 (17:46 +0200)]
test: fix virtual device name not set
Device name in device structure in virtual device used in
link_bonding_autotest is not set what causes segmentation fault when
rte_eth_dev_allocated is called.
Fixes: a1e7c17555e8 ("ethdev: use device name from device structure") Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com> Acked-by: Declan Doherty <declan.doherty@intel.com>
Only set the vlanonly bit if vlan_nonvlan is clear. Also, allow the
VLAN table to be cleared when vlanonly is set.
Clearing the VLAN table when vlanonly is set will stop all traffic
since it requires all frames to have a VLAN tag, and that tag to be
in the zero-length table. This is still a valid use case though,
and has been seen in the wild.
Fixes: 36735a932ca7 ("net/bnxt: support set VF QOS and MAC anti spoof") Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Tomasz Kulasek [Wed, 26 Jul 2017 15:53:30 +0000 (17:53 +0200)]
net/bonding: fix link status interrupt when down
RTE_ETH_EVENT_INTR_LSC callbacks are not called when all slaves goes down
in bond_ethdev_lsc_event_callback. It causes that link status change of
bonded device is not propagated up.
Fixes: deba8a2f8b0b ("net/bonding: fix link properties management") Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com> Acked-by: Declan Doherty <declan.doherty@intel.com>
Tomasz Kulasek [Wed, 26 Jul 2017 15:50:48 +0000 (17:50 +0200)]
net/bonding: fix crash when primary slave set
rte_eth_bond_primary_set segfaults for invalid port. This patch moves
devices check before use of internal data.
Fixes: 4c42498d916d ("net/bonding: allow slaves to also be bonded devices") Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com> Acked-by: Declan Doherty <declan.doherty@intel.com>
net/bnxt: fix setting VLAN anti spoof with same value
If the current VLAN anti spoof setting is same as the new value,
the firmware can return an error. Call the HWRM command to update
the new setting if it is different from the current value.
Fixes: 36735a932ca7 ("net/bnxt: support set VF QOS and MAC anti spoof") Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Leonid Myravjev [Fri, 21 Jul 2017 11:25:38 +0000 (11:25 +0000)]
net/ixgbe: remove subdev ids from PCI device table
The pci_id_ixgbe_map table has only PCI_ANY_ID for
.subvend and .subdev in all entries. Using of IXGBE_SUBDEV_ID_82599_SFP
for 'dev' is not correct. It generates the wrong PMD_INFO_STRING.
The output of the program "dpdk-pmdinfo.py" is confusing.
Signed-off-by: Leonid Myravjev <myravjev@amicon.ru> Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
We are wrongly using a Rx side HWRM command set_rx_mask to configure
VLAN anti-spoof. This being a Tx side feature, this patch
tries to fix it.
Since the HWRM command to do it is available only in
the newer firmware versions, the patch verifies the firmware
version before attempting to send the HWRM command to
the firmware.
Fixes: 36735a932ca7 ("net/bnxt: support set VF QOS and MAC anti spoof") Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix use of local variable to avoid segfault.
cnt was incorrectly tested and decremented in the loop that removes
a VLAN from the table.
Fixes: 36735a932ca7 ("net/bnxt: support set VF QOS and MAC anti spoof") Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1) handle_async_event is a DEBUG level log message.
2) Log "Unable to get default VNIC for VF %d" at INFO level.
Fixes: 36735a932ca7 ("net/bnxt: support set VF QOS and MAC anti spoof") Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Jeff Guo [Fri, 21 Jul 2017 03:07:04 +0000 (11:07 +0800)]
net/i40e: fix link down and negotiation
Enable the functions set link down and set link up in i40e by check
phy_type, and fix the issue of auto negotiation failed in XXV710 when
bind kernel driver after unbind from DPDK driver by modify the speed
setting distinguish from set link up and down. With this fix, if unbind
DPDK to bind kernel driver, no need to set auto negotiation and ifconfig
up anymore, remove the part from doc.
Fixes: ca7e599d4506 ("net/i40e: fix link management") Fixes: 2f1e22817420 ("i40e: skip link control as firmware workaround") Fixes: 6e145fcc754b ("i40e: support autoneg or force link speed") Cc: stable@dpdk.org Signed-off-by: Jeff Guo <jia.guo@intel.com> Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Jiayu Hu [Mon, 31 Jul 2017 07:56:44 +0000 (15:56 +0800)]
net/virtio: fix Rx interrupt setup
When use rte_eth_dev_configure() to enable rx queue interrupt for virtio
devices, virtio_init_device() isn't called to set up the interrupt
environment, which causes rx queue interrupt setup failed. This patch is
to fix this issue.
Fixes: 26b683b4f7d0 ("net/virtio: setup Rx queue interrupts") Cc: stable@dpdk.org Signed-off-by: Jiayu Hu <jiayu.hu@intel.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Jianfeng Tan [Fri, 28 Jul 2017 23:01:14 +0000 (23:01 +0000)]
net/virtio: fix MAC address read
When virtio-net devices are bound to uio_pci_generic, we get
the wrong mac addr by virtio PMD. The wrong mac addr is a
addr that is 4-byte left shift of the correct addr.
It's a regression bug introduced by the cleanup patch below.
The condition of if we set use_msix should be if msix is
actually enabled. Only to check if there is a capability list
is not enough. For example, binding a transitional device
to uio_pci_device would trigger the wrong assignment of use_msix.
To correct that, we also check the flags of msix capability to
make sure it's enabled.
Pablo de Lara [Wed, 26 Jul 2017 04:20:05 +0000 (05:20 +0100)]
mbuf: fix doxygen comment of bulk alloc
When calling rte_pktmbuf_alloc_bulk, if there are
not enough objects in the mempool, it returns
a negative value, which should be reflected
in the Doxygen comments.
Fixes: 9ec201f5d6e7 ("mbuf: provide bulk allocation") Cc: stable@dpdk.org Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The name of a device is copied in a provided buffer within
rte_eth_dev_detach(). The current sizeof is done on a pointer instead of
the intended array usually pointed to.
The name field of an rte_device is not assured however to point an
rte_devargs name field. The almost correct length to base this copy over
is thus RTE_DEV_NAME_MAX_LEN.
Almost correct, because unfortunately this function does not allow the
user to pass down a size parameter for the buffer it is meant to write.
This API should be fixed, it is broken by design.
Fixes: a1e7c17555e8 ("ethdev: use device name from device structure") Cc: stable@dpdk.org Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
If the device is a vdev, the parsing for PCI will fail with -EFAULT,
and will not try to check for a vdev.
Checking against error values returned by rte_eal_hotplug_add is
inelegant and prone to mistakes. Additionally, the failed PCI probe
prints a useless error that would throw off unsuspecting users:
ERROR: failed to parse device "pci:net_ring0"
This error is printed when attempting to probe a virtual device first
with the PCI bus (here, a net_ring0 device).
Use the relevant functions to infer the intended bus. The limitation to
PCI or vdev device is kept for strict API compatibility. Thus the PCI
probe attempt is avoided and the right function is directly called.
Fixes: 1c35f666df07 ("dev: fix attach proceeding with vdev on PCI success") Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The corrupted code checks only RAW flow item type special case for
returning its size but doesn't deal with any other flow item type
and returns 0 for all the others.
This bug leaves the flow descriptor empty for non RAW types.
The fix takes the correct size to any regular types from appropriate
array.
The same issue, with a similar fix, is in flow action size method
which deals only with RSS special type.
This bug was already present in the original code taken from testpmd.
The corrupted code checks only RAW flow item type special case for
returning its size but doesn't deal with any other flow item type
and returns 0 for all the others.
This bug leaves the flow descriptor empty for non RAW types.
The fix takes the correct size to any regular types from appropriate
array.
The same issue, with a similar fix, is in flow action size method which
deals only with RSS special type.
Fixes: 938a184a1870 ("app/testpmd: implement basic support for flow API") Cc: stable@dpdk.org Signed-off-by: Matan Azrad <matan@mellanox.com> Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
dev: fix attach proceeding with vdev on PCI success
When rte_eal_hotplug_add() successfully probes a PCI device,
the return value is zero.
The check afterward only returns on error different from -EINVAL.
It should return also on success, as there is no need to
attempt probing the device with vdev.
Fixes: 0bba9e605048 ("eal: use new hotplug API in attach") Cc: stable@dpdk.org Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
eal: disable NUMA related warnings on non-NUMA systems
Disable multiple NUMA warnings on non-NUMA systems.
"EAL: eal_parse_sysfs_value(): cannot open sysfs value
/sys/bus/pci/devices/0000:00:00.0/numa_node
EAL: numa_node is invalid or not present. Set it 0 as default
EAL: cannot open /proc/self/numa_maps, consider that all memory is
in socket_id 0"
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com> Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
git.droids-corp.org / dpdk.git / log