Andrew Rybchenko [Thu, 15 Dec 2016 12:50:55 +0000 (12:50 +0000)]
net/sfc: support extended statistics
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Andrew Rybchenko [Thu, 15 Dec 2016 12:50:54 +0000 (12:50 +0000)]
net/sfc: add basic statistics
Does not implement any deprecated statistics.
No per-queue statistics yet.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Andrew Rybchenko [Thu, 15 Dec 2016 12:50:53 +0000 (12:50 +0000)]
net/sfc: support parameter to choose performance profile
Supported options are auto (based on NIC firmware variant and
installed licences), throughput, low-latency.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Andrew Rybchenko [Thu, 15 Dec 2016 12:50:52 +0000 (12:50 +0000)]
net/sfc: implement MCDI logging callback
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Keith Wiles [Mon, 12 Dec 2016 14:38:38 +0000 (08:38 -0600)]
net/tap: add TUN/TAP device PMD
The PMD allows for DPDK and the host to communicate using a raw
device interface on the host and in the DPDK application. The device
created is a Tap device with a L2 packet header.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Aws Ismail <aismail@ciena.com>
Tested-by: Vasily Philipov <vasilyf@mellanox.com>
Bernard Iremonger [Tue, 13 Dec 2016 11:40:40 +0000 (11:40 +0000)]
ethdev: remove some VF functions
remove the following API's:
rte_eth_dev_set_vf_rxmode
rte_eth_dev_set_vf_rx
rte_eth_dev_set_vf_tx
rte_eth_dev_set_vf_vlan_filter
rte_eth_dev_set_vf_rate_limit
Increment LIBABIVER in Makefile
Remove deprecation notice for removing rte_eth_dev_set_vf_* API's.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Bernard Iremonger [Tue, 13 Dec 2016 11:40:39 +0000 (11:40 +0000)]
net/ixgbe: remove static set VF functions
remove the following static functions:
ixgbe_set_pool_rx_mode
ixgbe_set_pool_rx
ixgbe_set_pool_tx
ixgbe_set_pool_vlan_filter
ixgbe_set_vf_rate_limit
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Bernard Iremonger [Tue, 13 Dec 2016 11:40:38 +0000 (11:40 +0000)]
examples/ethtool: use ixgbe public function
Replace rte_eth_dev_set_vf_rxmode with rte_pmd_ixgbe_set_vf_rx_mode.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Bernard Iremonger [Tue, 13 Dec 2016 11:40:37 +0000 (11:40 +0000)]
app/testpmd: cleanup parameter checking
Parameter checking is done in the rte_pmd_ixgbe_* functions.
Remove parameter checking from before calls to the rte_pmd_ixgbe_*
functions.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Bernard Iremonger [Tue, 13 Dec 2016 11:40:36 +0000 (11:40 +0000)]
app/testpmd: use ixgbe public functions
Use the the following ixgbe public functions:
rte_pmd_ixgbe_set_vf_rate_limit
rte_pmd_ixgbe_set_vf_rx
rte_pmd_ixgbe_set_vf_rxmode
rte_pmd_ixgbe_set_vf_tx
rte_pmd_ixgbe_set_vf_vlan_filter
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Bernard Iremonger [Tue, 13 Dec 2016 11:40:35 +0000 (11:40 +0000)]
net/ixgbe: move set VF functions from the ethdev
Move the following functions from eth_dev_ops to the ixgbe PMD and rename:
ixgbe_set_pool_rx_mode
ixgbe_set_pool_rx
ixgbe_set_pool_tx
ixgbe_set_pool_vlan_filter
ixgbe_set_vf_rate_limit
Rename the functions to the following:
rte_pmd_ixgbe_set_vf_rxmode
rte_pmd_ixgbe_set_vf_rx
rte_pmd_ixgbe_set_vf_tx
rte_pmd_ixgbe_set_vf_vlan_filter
rte_pmd_ixgbe_set_vf_rate_limit
Use public function internally
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Yong Wang [Wed, 30 Nov 2016 12:32:09 +0000 (07:32 -0500)]
net/qede: fix resource leak
Current code does not close 'fd' on function exit, leaking resources.
Fixes:
2ea6f76aff40 ("qede: add core driver")
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Harish Patil <harish.patil@qlogic.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:53 +0000 (19:24 +0800)]
net/i40e: remove unused macro
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:52 +0000 (19:24 +0800)]
net/i40e/base: remove unused macro
remove X722_SUPPORT and I40E_NDIS_SUPPORT MACROs
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:51 +0000 (19:24 +0800)]
net/i40e/base: fix byte order
Big Endian platform will accidentally send the wrong
data to the firmware command. This patch fixes the issue.
Fixes:
788fc17b2dec ("i40e/base: support proxy config for X722")
Fixes:
3c89193a36fd ("i40e/base: support WOL config for X722")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:50 +0000 (19:24 +0800)]
net/i40e/base: fix division by zero
For some cases when reading from device are incorrect or image is
incorrect, this part of code causes crash due to division by zero.
Fixes:
8db9e2a1b232 ("i40e: base driver")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:49 +0000 (19:24 +0800)]
net/i40e/base: add broadcast promiscuous control per VLAN
Add a new adminq function that allows driver to configure per-VLAN
broadcast promiscuous mode, similar to how we handle unicast and
multicast promiscuous modes.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:48 +0000 (19:24 +0800)]
net/i40e/base: add error state for NVM update state machine
This patch adds I40E_NVMUPD_STATE_ERROR state for NVM update.
Without this patch driver has no possibility to return NVM image write
failure.This state is being set when ARQ rises error.
arq_last_status is also updated every time when ARQ event comes,
not only on error cases.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:47 +0000 (19:24 +0800)]
net/i40e/base: remove duplicate definitions
We already define I40E_AQ_PHY_TYPE_EXT_25G* flags in the response adminq
structure above, and do not need to re-define these.
While we are here, replace 0X with 0x as normal style.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:46 +0000 (19:24 +0800)]
net/i40e/base: comment that UDP port must be in host order
The firmware expects the Port number to be in Little Endian format, and
the i40e_aq_add_udp_tunnel command clearly expects the udp_port variable
to be in Host order, as it uses CPU_TO_LE16(). It was recently
discovered in the Linux driver that we were passing a Big Endian port
number, which was therefor not enabling the UDP tunnel correctly.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:45 +0000 (19:24 +0800)]
net/i40e/base: convert shift values to hex
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:44 +0000 (19:24 +0800)]
net/i40e/base: fix NVM access interfering
Acquire NVM lock before reads on all devices. Previously, locks were
only used for X722 and later. Fixes an issue where simultaneous X710
NVM accesses were interfering with each other.
Fixes:
8db9e2a1b232 ("i40e: base driver")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:43 +0000 (19:24 +0800)]
net/i40e/base: save link FEC info from link up event
Store the FEC status bits from the link up event into the
hw_link_info structure.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:42 +0000 (19:24 +0800)]
net/i40e/base: fix WoL failure on PF reset
By default the device clears all MAC filter information on PF Reset.
However, this will cause Wake-On-LAN to fail because the wake filters
are deleted on transition to D3 power state. To get around this,
firmware is adding functionality to preserve certain MAC filters during
PFR. These bits allow the driver tell the FW which filters to preserve.
Set the datalen field and add I40E_AQ_FLAG_BUF/I40E_AQ_FLAG_RD flags in the
desc struct for the WoL/Proxy AQ descriptors. The WoL/Proxy AQ commands
were failing because these were missing.
Fixes:
3c89193a36fd ("i40e/base: support WOL config for X722")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:41 +0000 (19:24 +0800)]
net/i40e/base: implement VSI full promiscuous mode
This patch implements a function to set a VSI to broadcast, multicast, and
unicast promiscuous mode all at once. This is specifically needed to set
the WoL/Proxy VSI created by FW to full promiscuous mode during power down
for WoL patterns and protocol offloads to function properly.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:40 +0000 (19:24 +0800)]
net/i40e/base: implement clear all WoL filters
This patch implements the clear Wake on LAN (WoL) filters admin queue
function which clears out ALL WoL patterns programmed into
the flex filters.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:39 +0000 (19:24 +0800)]
net/i40e/base: adjust 25G PHY type values
Define the values for the 25G PHY type bit-fields that match
reported values from firmware. There was a gap in the bit
fields but no corresponding gap i40e_aq_phy_type enum.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:38 +0000 (19:24 +0800)]
net/i40e/base: use BIT macro instead of bit fields
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:37 +0000 (19:24 +0800)]
net/i40e/base: add FEC bits to PHY capabilities
Add FEC bits to the PHY capabilities AQ command struct. This is required
for 25GbE support. Change the name of the generic mod_type_ext field to
indicate that it is now used for handling FEC.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:36 +0000 (19:24 +0800)]
net/i40e/base: remove FPK HyperV VF device ID
Microsoft recently removed the requirement for VFs to use the VMBus.
The Fort Park Windows VF has been changed to use only the hardware
mailbox, so the Hyper-V VF device ID can be removed.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:35 +0000 (19:24 +0800)]
net/i40e/base: deprecate unused macro
I40E_MAC_X710 was supposed to be for 10G and I40E_MAC_XL710
was supposed to be for 40G. But i40e_set_mac_type() sets
I40E_MAC_XL710 for all device IDS. I40E_MAC_X710 is not
used at all. Thus deprecating this extra macro.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:34 +0000 (19:24 +0800)]
net/i40e/base: replace memcpy
To align with current memcpy use, replace existing legacy memcpy() calls
with i40e_memcpy() calls.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:33 +0000 (19:24 +0800)]
net/i40e/base: fix unknown PHYs incorrect identification
The PHY type value for unrecognized PHYs and cables was changed
based on firmware version number. Newer hardware use lower firmware
version numbers and this was causing some PHYs to be identified
as type 0x16 instead of 0xe (unknown).
Without this patch, newer card will incorrectly identify unknown
PHYs and cables.
This change adds hardware type to the check for firmware version
so the PHY type is reported correctly.
Fixes:
8db9e2a1b232 ("i40e: base driver")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:32 +0000 (19:24 +0800)]
net/i40e/base: add protocols when discover capabilities
Add logical_id to I40E_AQ_CAP_ID_MNG_MODE capability starting from major
version 2.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:31 +0000 (19:24 +0800)]
net/i40e/base: add bus number info
Currently i40e_bus_info has PCI device and function info only. However
in log messages slot number (i.e hw->bus.device) is being printed
as bus number. Another field should be added to provide bus number
info and preserve existing information.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:30 +0000 (19:24 +0800)]
net/i40e/base: add clause22 and clause45 implementation
Some external PHYs require Clause22 and Clause45 method for
accessing registers. Mostly used for X722 support.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:29 +0000 (19:24 +0800)]
net/i40e/base: add media type detection for 25G link
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:28 +0000 (19:24 +0800)]
net/i40e/base: fix long link down notification time
This patch fixes a problem where it could take a very
long time (>100 msec) to print the link down notification.
This problem is fixed by changing how often we update link
info from fw, when link is down. Without this patch, it can
take over 100msec to notify user link is down.
Fixes:
e6691b428eb1 ("i40e/base: fix PHY NVM interaction")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:27 +0000 (19:24 +0800)]
net/i40e/base: group base mode VF offload flags
Group together the minimum set of offload capabilities that are always
supported by VF in base mode. This define would be used by PF to make
sure VF in base mode gets minimum of base capabilities.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:26 +0000 (19:24 +0800)]
net/i40e/base: fix bit test mask
Incorrect bit mask was used for testing "get link status" response.
Instead of I40E_AQ_LSE_ENABLE (which is actually 0x03) it should
be I40E_AQ_LSE_IS_ENABLED (which is defined as 0x01).
Fixes:
8db9e2a1b232 ("i40e: base driver")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:25 +0000 (19:24 +0800)]
net/i40e/base: remove unnecessary code
This patch changes some assignments and removing the unnecessary
code to avoid error reported by static analysis tools.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:24 +0000 (19:24 +0800)]
net/i40e/base: fix flow control set for 25G
Add phy_type_ext copied from old setting to rpevents 25G PHY
types from being disabled when setting the flow control modes.
Fixes:
51131ae119 ("net/i40e/base: get PHY abilities for 25G")
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Jingjing Wu [Sat, 10 Dec 2016 11:24:23 +0000 (19:24 +0800)]
net/i40e/base: add encap checksum VF offload flag
Add ENCAP_CSUM offload negotiation flag. Currently VF assumes checksum
offload for encapsulated packets is supported by default. Going forward,
this feature needs to be negotiated with PF before advertising to the
stack. Hence, we need a flag to control it.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Alejandro Lucero [Fri, 2 Dec 2016 08:17:33 +0000 (08:17 +0000)]
net/nfp: document supported features
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Ferruh Yigit [Wed, 7 Dec 2016 17:19:48 +0000 (17:19 +0000)]
net/ixgbe: fix typo in comment
Fixes:
c03fcee9abbd ("ixgbe: remove CRC size from byte counters")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Ivan Malov [Fri, 2 Dec 2016 07:41:21 +0000 (07:41 +0000)]
net/sfc: restart TxQ in case of exception on event queue
Examples of recoverable exceptions because of Tx error are:
- Tx descriptor PCI read error
- invalid Tx option descriptor
- Tx option descriptor not supported by the firmware variant
- unexpected Tx option descriptor (e.g. missing FATSO2A before
FATSO2B, missing FATSO2B after FATSO2A)
- incomplete packet push (CONT bit set in the latest pushed DMA
descriptor)
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Andrew Rybchenko [Fri, 2 Dec 2016 07:41:20 +0000 (07:41 +0000)]
net/sfc: restart RxQ in case of exception on event queue
Examples of recoverable exceptions are:
- unexpected Rx event (Rx scatter abort with non-zero size,
too big Rx descriptors batch completed)
- Rx error due to invalid Rx descriptors push
- Rx error due to Rx descriptor read error (e.g. unmapped Rx ring
and denied by IOMMU)
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Ivan Malov [Tue, 29 Nov 2016 16:19:27 +0000 (16:19 +0000)]
net/sfc: send bursts of packets
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ivan Malov [Tue, 29 Nov 2016 16:19:26 +0000 (16:19 +0000)]
net/sfc: implement transmit path start / stop
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ivan Malov [Tue, 29 Nov 2016 16:19:25 +0000 (16:19 +0000)]
net/sfc: set up and release Tx queues
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ivan Malov [Tue, 29 Nov 2016 16:19:24 +0000 (16:19 +0000)]
net/sfc: add function to check configured Tx mode
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Ivan Malov [Tue, 29 Nov 2016 16:19:23 +0000 (16:19 +0000)]
net/sfc: provide basic stubs for Tx subsystem
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:22 +0000 (16:19 +0000)]
net/sfc: discard scattered packet on Rx correctly
Since Rx scatter is not supported, all scattered packets are discarded.
It is not always possible to disable scatter on Huntington, so we
should handle scattered packets correctly in any case.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:21 +0000 (16:19 +0000)]
net/sfc: implement device callback to Rx burst of packets
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:20 +0000 (16:19 +0000)]
net/sfc: implement Rx queue start and stop operations
These functions should set the queue state in dev->data->rx_queue_state
array.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:19 +0000 (16:19 +0000)]
net/sfc: validate Rx queue buffers setup
Check that Rx mbuf pool, MTU and Rx scatter config are in sync.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:18 +0000 (16:19 +0000)]
net/sfc: calculate Rx buffer size which may be used
Take Rx buffer start alignment and end-padding into account.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:17 +0000 (16:19 +0000)]
net/sfc: implement Rx queue setup release operations
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:16 +0000 (16:19 +0000)]
net/sfc: check configured Rx mode
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:15 +0000 (16:19 +0000)]
net/sfc: implement Rx subsystem stubs
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Artem Andreev [Tue, 29 Nov 2016 16:19:14 +0000 (16:19 +0000)]
net/sfc: retrieve link info
Signed-off-by: Artem Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:13 +0000 (16:19 +0000)]
net/sfc: minimum port control sufficient to receive traffic
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:12 +0000 (16:19 +0000)]
net/sfc: periodic management EVQ polling using alarm
Timers cannot be used to implement periodic polling, since it implies
requirement on application to process timers in the main loop.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:11 +0000 (16:19 +0000)]
net/sfc: maintain management event queue
The event queue is required for device level events (e.g. link status
change) and flush events.
Provide thread-safe function to poll the event queue since it may be
really done from different contexts.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:10 +0000 (16:19 +0000)]
net/sfc: implement EVQ dummy exception handling
Right now the code just logs the exception and sets flag to notify
subsequent event handlers and poller that recovery is required.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:09 +0000 (16:19 +0000)]
net/sfc: support event queue
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:08 +0000 (16:19 +0000)]
net/sfc: interrupts support sufficient for event queue init
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:07 +0000 (16:19 +0000)]
net/sfc: estimate available resources
Resources required in accordance with configuration are
allocated only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:06 +0000 (16:19 +0000)]
net/sfc: add device start and stop operations
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:05 +0000 (16:19 +0000)]
net/sfc: add device configuration checks
Manual link speed/duplex configuration is not supported yet.
Loopback is not supported yet.
Flow Director is not supported.
Link status change notification using interrupt is not supported yet.
Receive data notification using interrupts is not supported yet.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:04 +0000 (16:19 +0000)]
net/sfc: add configure and close stubs
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:03 +0000 (16:19 +0000)]
net/sfc: add init on attach
The setup and configuration of the PMD is not performance sensitive,
but is not thread safe either. It is possible that the multiple
read/writes during PMD setup and configuration could be corrupted
in a multi-thread environment. Since this is not performance
sensitive, the developer can choose to add their own layer to provide
thread-safe setup and configuration. It is expected that, in most
applications, the initial configuration of the network ports would be
done by a single thread at startup.
In the case of exception on the event queue, the event queue and
corresponding Rx/Tx queue should be restarted in the Rx/Tx queue
polling context. These operations require access to the device
control which should be serialized. The device level lock will do
the job.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Artem Andreev [Tue, 29 Nov 2016 16:19:02 +0000 (16:19 +0000)]
net/sfc: build libefx
Implement efsys.h for the PMD.
Signed-off-by: Artem Andreev <artem.andreev@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:01 +0000 (16:19 +0000)]
net/sfc/base: import libefx licensing
Provide API to deal with licenses on SFN7xxx and SFN8xxx
family adapters.
EFSYS_OPT_LICENSING should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:19:00 +0000 (16:19 +0000)]
net/sfc/base: import bootrom configuration
Provide API to read/write bootrom configuration from/to NVRAM.
EFSYS_OPT_BOOTROM should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:59 +0000 (16:18 +0000)]
net/sfc/base: import VPD support
Provide API to read/write PCI Vital Product Data.
EFSYS_OPT_VPD should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:58 +0000 (16:18 +0000)]
net/sfc/base: import NVRAM support
Provide API to work with NIC non-volatile memory. It is used
to update firmware, configure NIC including bootrom parameters,
manage licenses, store PCI Vital Product Data etc.
EFSYS_OPT_NVRAM should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:57 +0000 (16:18 +0000)]
net/sfc/base: import Rx packed stream mode
In packed stream mode, large buffers are provided to the NIC
into which many packets can be delivered. This reduces the
number of queue refills needed compared to delivering every
packet into a separate buffer.
EFSYS_OPT_RX_PACKED_STREAM should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:56 +0000 (16:18 +0000)]
net/sfc/base: import monitors access via MCDI
EFSYS_OPT_MON_MCDI should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:55 +0000 (16:18 +0000)]
net/sfc/base: import monitors statistics
EFSYS_OPT_MON_STATS should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:54 +0000 (16:18 +0000)]
net/sfc/base: import loopback control
EFSYS_OPT_LOOPBACK should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:53 +0000 (16:18 +0000)]
net/sfc/base: import RSS support
EFSYS_OPT_RX_SCALE should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:52 +0000 (16:18 +0000)]
net/sfc/base: import Rx scatter support
EFSYS_OPT_RX_SCATTER should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:51 +0000 (16:18 +0000)]
net/sfc/base: import event prefetch
EFSYS_OPT_EV_PREFECT allows to enable event prefetching
when event queue is polled.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:50 +0000 (16:18 +0000)]
net/sfc/base: import MAC statistics
MAC statistics are either periodically (if supported/requested)
or on-demand written to provided DMA-mapped memory.
If periodic update is not supported (e.g. for EF10 virtual
functions), it is the driver responsibility to handle it.
EFSYS_OPT_MAC_STATS should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:49 +0000 (16:18 +0000)]
net/sfc/base: import PHY LEDs control
EFSYS_OPT_PHY_LED_CONTROL should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:48 +0000 (16:18 +0000)]
net/sfc/base: import PHY statistics
EFSYS_OPT_PHY_STATS should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:47 +0000 (16:18 +0000)]
net/sfc/base: import PHY flags control
EFSYS_OPT_PHY_FLAGS should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:46 +0000 (16:18 +0000)]
net/sfc/base: import software per-queue statistics
EFSYS_OPT_QSTATS should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:45 +0000 (16:18 +0000)]
net/sfc/base: import built-in selftest
EFSYS_OPT_BIST should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:44 +0000 (16:18 +0000)]
net/sfc/base: import diagnostics support
EFSYS_OPT_DIAG should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:43 +0000 (16:18 +0000)]
net/sfc/base: import SFN8xxx family support
SFN8xxx is the second family based on EF10 architecture.
It has few differences from SFN7xxx adapters family.
EFSYS_OPT_MEDFORD should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:42 +0000 (16:18 +0000)]
net/sfc/base: import SFN7xxx family support
SFN7xxx is the first family based on EF10 architecture.
EFSYS_OPT_HUNTINGTON should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:41 +0000 (16:18 +0000)]
net/sfc/base: import 5xxx/6xxx family support
EFSYS_OPT_SIENA should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:40 +0000 (16:18 +0000)]
net/sfc/base: import MCDI proxy authorization
MCDI proxy authorization may be used if privileged PCI
function (physical function) would like to intercept and
authorize MCDI requests done by unprivileged (e.g. virtual)
PCI function. It may be used to control unprivileged
function Rx mode (e.g. promiscuous, all-multicast), MTU
and default MAC address change requests etc.
Current libefx support is limited to client-side which
is required to work when function requests need to be
authorized.
Server side support required to request and do the
authorization is not implemented yet.
EFSYS_OPT_MCDI_PROXY_AUTH should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:39 +0000 (16:18 +0000)]
net/sfc/base: import MCDI logging
Driver can provide a function to be called to log MCDI
requests and responses to help with debugging.
Solarflare netlogdecode cross-platform tool may be used
to decode these logs.
EFSYS_OPT_MCDI_LOGGING should be enabled to use it.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:38 +0000 (16:18 +0000)]
net/sfc/base: import MCDI implementation
Implement interface to talk to NIC management CPU. Provide
helpers to fill in MCDI requests, execute it and process
received response.
MCDI request is prepared in either PCI BAR mapped memory
(SFN5xxx/SFN6xxx) or DMA-mapped memory (SFN7xxx/SFN8xxx) and,
doorbell is pressed (memory-mapped register) to execute it.
Events about MCDI completion are delivered to house-keeping
event queue, but usage of these events is optional and MCDI
buffer may be simply polled waiting for completion
indication set.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:37 +0000 (16:18 +0000)]
net/sfc/base: import MCDI definition
The header defines data interface between host CPU and NIC
management CPU.
The header is automatically generated from firmware sources.
MCDI is used on NIC control path (configuration,
event/transmit/receive queues setup and teardown etc), but
not used on data path.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:36 +0000 (16:18 +0000)]
net/sfc/base: import filters support
Filtering capabilities depend on NIC family and used firmware
variant. Provided API allows to get supported filter types
(in a priority order), add/delete individual filters and
restore entire filter table after, for example, NIC management
CPU reboot.
Rx filters allow to redirect matching flow to specified Rx queue.
Tx filters allow to control generated traffic (e.g. to implement
virtual function anti-spoofing control).
EFSYS_OPT_FILTER should be enabled to use it. It is required
for SFN7xxx and SFN8xxx adapter families support.
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Andrew Rybchenko [Tue, 29 Nov 2016 16:18:35 +0000 (16:18 +0000)]
net/sfc/base: import register definitions
From Solarflare Communications Inc.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>