Adrien Mazarguil [Tue, 30 Jun 2015 09:28:06 +0000 (11:28 +0200)]
mlx4: add VXLAN checksum offload
Depending on adapters features and VXLAN support in the kernel, VXLAN frames
can be automatically recognized, in which case checksum validation and
generation occurs on inner and outer L3 and L4.
Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Gilad Berman [Tue, 30 Jun 2015 09:28:05 +0000 (11:28 +0200)]
mlx4: add L3/L4 checksum offload
Mellanox ConnectX-3 adapters can handle L3 (IPv4) and L4 (TCP, UDP, TCP6,
UDP6) RX checksums validation and TX checksums generation, with and without
802.1Q (VLAN) headers.
Alex Rosenbaum [Tue, 30 Jun 2015 09:28:03 +0000 (11:28 +0200)]
mlx4: shrink Tx queue elements for better performance
TX queue elements (struct txq_elt) contain WR and SGE structures required by
ibv_post_send(). This commit replaces them with a single pointer to the
related TX mbuf considering that:
- There is no need to keep these structures around forever since the
hardware doesn't access them after ibv_post_send() and send_pending*()
have returned.
- The TX queue index stored in the WR ID field is not used for completions
anymore since they use a separate counter (elts_comp_cd).
- The WR structure itself was only useful for ibv_post_send(), it is
currently only used to store the mbuf data address and an offset to the
mbuf structure in the WR ID field. send_pending*() callbacks only require
SGEs or buffer pointers.
Therefore for single segment mbufs, send_pending() or send_pending_inline()
can be used directly without involving SGEs. For scattered mbufs, SGEs are
allocated on the stack and passed to send_pending_sg_list().
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com> Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Adrien Mazarguil [Tue, 30 Jun 2015 09:28:01 +0000 (11:28 +0200)]
mlx4: use MOFED 3.0 fast verbs interface for Tx operations
The "raw" post send interface was experimental and has been deprecated. This
commit replaces it with a new low level interface that dissociates post and
flush (doorbell) operations for improved QP performance.
The CQ polling function is updated as well.
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com> Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Alex Rosenbaum [Tue, 30 Jun 2015 09:28:00 +0000 (11:28 +0200)]
mlx4: avoid requesting Tx completion events to improve performance
Instead of requesting a completion event for each TX burst, request it on a
fixed schedule once every MLX4_PMD_TX_PER_COMP_REQ (currently 64) packets to
improve performance.
Signed-off-by: Alex Rosenbaum <alexr@mellanox.com> Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Or Ami [Tue, 30 Jun 2015 09:27:58 +0000 (11:27 +0200)]
mlx4: query netdevice to get initial MAC address
Querying the netdevice instead of deriving the port's MAC address from its
GID is less prone to errors. There is no guarantee that the GID will always
contain it nor that the algorithm won't change.
Signed-off-by: Or Ami <ora@mellanox.com> Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Olga Shern [Tue, 30 Jun 2015 09:27:57 +0000 (11:27 +0200)]
mlx4: fix support for multiple vlan filters
This commit fixes the "Multiple RX VLAN filters can be configured, but only
the first one works" bug. Since a single flow specification cannot contain
several VLAN definitions, the flows table is extended with MLX4_MAX_VLAN_IDS
possible specifications per configured MAC address.
Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Or Ami <ora@mellanox.com> Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Or Ami [Tue, 30 Jun 2015 09:27:56 +0000 (11:27 +0200)]
mlx4: remove provision for flow creation failure in DMFS A0 mode
Starting from MLNX_OFED 3.0 FW 2.34.5000 when working with optimized
steering mode (-7) QPs can be attached to the port's MAC, therefore no need
for the check.
Signed-off-by: Or Ami <ora@mellanox.com> Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Olga Shern [Tue, 30 Jun 2015 09:27:53 +0000 (11:27 +0200)]
mlx4: improve accuracy of link status information
Query interface properties using the ethtool API instead of Verbs
through ibv_query_port(). The returned information is more accurate for
Ethernet links since several link speeds cannot be mapped to Verbs
semantics.
Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Alex Rosenbaum <alexr@mellanox.com> Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Olga Shern [Tue, 30 Jun 2015 09:27:52 +0000 (11:27 +0200)]
mlx4: allow application to partially fork
Although using the PMD from a forked process is still unsupported, this
commit makes Verbs safe enough for applications to call fork() for other
purposes.
Signed-off-by: Olga Shern <olgas@mellanox.com> Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Adrien Mazarguil [Tue, 30 Jun 2015 09:27:47 +0000 (11:27 +0200)]
mlx4: fix possible crash on scattered mbuf allocation failure
When failing to allocate a segment, mlx4_rx_burst_sp() may call
rte_pktmbuf_free() on an incomplete scattered mbuf whose next pointer
in the last segment is not set.
Rahul Lakkireddy [Mon, 29 Jun 2015 23:28:42 +0000 (04:58 +0530)]
cxgbe: add documentation
Adds cxgbe poll mode driver documentation under the usual doc/guides/nics/
directory with the rest of the drivers. The documentation covers cxgbe
implementation details, features and limitations, prerequisites,
configuration, and a sample application usage.
Rahul Lakkireddy [Mon, 29 Jun 2015 23:28:35 +0000 (04:58 +0530)]
cxgbe: add pmd skeleton
Adds cxgbe poll mode driver for DPDK under drivers/net/cxgbe directory.
This patch:
1. Adds the Makefile to compile cxgbe pmd.
2. Registers and initializes the cxgbe pmd driver.
Enable cxgbe PMD for compilation and linking with changes to:
1. config/common_linuxapp to add macros for cxgbe pmd.
2. drivers/net/Makefile to add cxgbe pmd to the compile list.
3. mk/rte.app.mk to add cxgbe pmd to link.
Update MAINTAINERS file to claim responsibility for the cxgbe PMD.
Huawei Xie [Tue, 30 Jun 2015 09:20:47 +0000 (17:20 +0800)]
vhost: fix race for connection fd
In the event handler of connection fd, the connection fd could be possibly
closed. The event dispatch loop would then try to remove the fd from fdset.
Between these two actions, another thread might register a new listenfd
reusing the val of just closed fd, so we couldn't call fdset_del which would
wrongly clean up the new listenfd. A new function fdset_del_slot is provided
to cleanup the fd at the specified location.
Huawei Xie [Mon, 29 Jun 2015 15:58:53 +0000 (23:58 +0800)]
vhost: turn on by default
Previous vhost-cuse implementation requires fuse development package.
Now that we have vhost-user implementation, which is enabled by default
and doesn't require additional library to build, we could turn on vhost.
Huawei Xie [Thu, 25 Jun 2015 05:47:37 +0000 (13:47 +0800)]
vhost: realloc device and queues to same numa node as vring desc
When we get the address of vring descriptor table in VHOST_SET_VRING_ADDR
message, will try to reallocate vhost device and virt queue to the same
numa node.
Neil Horman [Mon, 29 Jun 2015 13:59:40 +0000 (09:59 -0400)]
doc: add ABI guidelines
People have been asking for ways to use the ABI macros, heres some docs to
clarify their use. Included is:
* An overview of what ABI is
* Details of the ABI deprecation process
* Details of the versioning macros
* Examples of their use
* Details of how to use the ABI validator
Thanks to John Mcnamara, who duplicated much of this effort at Intel while I was
working on it. Much of the introductory material was gathered and cleaned up by
him.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: John McNamara <john.mcnamara@intel.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Neil Horman [Mon, 29 Jun 2015 13:59:38 +0000 (09:59 -0400)]
compat: add macro to map symbol in static build
It was pointed out in my examples that doing shared library symbol versioning by
partitioning symbols to version specific functions (as opposed to leaving the
latest symol version at the base symbol name), neglects to take into account
static builds. Add a macro to handle that. If you choose a versioning approach
that uniquely names every version of the symbol, then this macro lets you map
your symbol choice to the base name when building a static library
Also, while I'm at it, since we're documenting this in the guide, take the
abbreviated example out of the header
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
[Thomas: remove remaining part of old example] Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
On Fedora 22, the "ar" binary operates by default in deterministic mode,
making the "u" parameter irrelevant, and leading to warning messages
getting printed in the build output like below.
INSTALL-LIB librte_kvargs.a
ar: `u' modifier ignored since `D' is the default (see `U')
There are two options to remove these warnings:
* add in the "U" flag to make "ar" non-deterministic again
* remove the "u" flag to have all objects always updated
This patch takes the second approach. It also explicitly adds in the "D"
flag to make behaviour consistent across different distributions which
may have different defaults.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com> Acked-by: Olivier Matz <olivier.matz@6wind.com>
Adrien Mazarguil [Mon, 29 Jun 2015 09:34:52 +0000 (11:34 +0200)]
eal: fix pedantic build of mlx4 debug mode
Since the commit below includes rte_cpuflags.h in rte_spinlock.h,
compilation of the mlx4 driver fails when CONFIG_RTE_LIBRTE_MLX4_DEBUG=y.
This mode adds -pedantic to the compiler's command line for mlx4, which
complains about the static definition of an empty cpu_feature_table[] in
common rte_cpuflags.h, then about its redefinition as a larger array in
arch-specific rte_cpuflags.h.
While DPDK does not officially support -pedantic internally, external
applications may enable it and include rte_spinlock.h from the public API.
Instead of removing -pedantic from mlx4, this commit fixes rte_cpuflags.h.
Fixes: ba7468997ea6 ("spinlock: add HTM lock elision for x86") Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Acked-by: David Marchand <david.marchand@6wind.com>
Jan Blunck [Wed, 24 Jun 2015 21:01:23 +0000 (14:01 -0700)]
bonding: fix crash when stopping inactive slave
When stopping the bond device we don't need to try and free up the LACPDU's
from deactivated devices since this is covered by
bond_mode_8023ad_deactivate_slave().
This fixes the following:
[ 0.100569] PANIC in bond_ethdev_stop():
[ 0.100589] line 1172 assert "port->rx_ring != NULL" failed
Signed-off-by: Jan Blunck <jblunck@infradead.org> Acked-by: Declan Doherty <declan.doherty@intel.com>
Tomasz Kulasek [Wed, 24 Jun 2015 08:50:45 +0000 (10:50 +0200)]
bonding: fix initial link status of slave
On Fortville NIC, link status change interrupt callback is not executed when
slave in bonding is (re-)started. It causes that slave's NIC is inactive even
if its link status is up on the start.
This patch invokes lsc callback, just after port's start, to check its initial
link status and manage properly.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com> Acked-by: Declan Doherty <declan.doherty@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:26:25 +0000 (11:26 +0800)]
ixgbe/base: optimize link up time
This patch adds max_link_up_time parameter to mac structure.
This parameter is used to control maximum link polling time in
ixgbe_check_mac_link functions. It is required to prevent long wait
time on x550 PHY that have no external link.
Since x550 is handled by software, we have to reset internal (PHY to
PHY) link when external link changes, and after reset, we have to wait for
this link to be established. As a result of not having interrupts, we have
to poll for link state, and we know that this link comes up much faster
than default 9 seconds. This parameter is added to prevent waiting 9
seconds for link when external link is not established.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:26:13 +0000 (11:26 +0800)]
ixgbe/base: rework mac-type-dependent constants
Add a const u32 *mvals pointer to the ixgbe_hw struct to point to an
array of mac-type-dependent values. These can include register
offsets, masks, whatever can be in a u32. When the ixgbe_hw struct
is initialized, a pointer to the appropriate array must be set.
The IXGBE_I2CCTL register references are changed to use it.
Use the mvals array to hold differing values used for
IXGBE_I2C_* symbols.
Use the mvals array to hold differing values used for
IXGBE_*_GPI* symbols.
Use the mvals array to hold differing values use for CIAA and
CIAD symbols.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:26:22 +0000 (11:26 +0800)]
ixgbe/base: fix X550em flow control to be KR only
The code in the if statement is specific to the KR PHY. However,
the conditional was only checking for backplane. If the driver
was using the KX4 backplane PHY, this code would execute but
would write to the wrong PHY.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:26:18 +0000 (11:26 +0800)]
ixgbe/base: disable software LPLU implementation for X557 V2
This patch disables SW LPLU on x557 V2. It also sets the
enter_lplu function pointer to NULL on x557 V2. LPLU will be
implemented in FW for all x557 V2 interfaces. The SW LPLU
implementation must be disabled on V2 to avoid conflicts with
FW. SW LPLU support is still required for x557 V1.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:26:10 +0000 (11:26 +0800)]
ixgbe/base: configure MDIO clock for X550em
The MDIO clock needs to be configured for a specific speed for
x550em. We expected this to be done automatically, but in
the early days of the project this was not happening. We put
code in to do this ourselves.
Eventually, we decided that there is no harm in having SW do
this all the time, so we may not remove this code in the future.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:26:19 +0000 (11:26 +0800)]
ixgbe/base: remove FEC disablement for X550em
This patch removes the clearing of the FEC(Forward Error Correction)
bits in ixgbe_setup_kr_speed_x550em. FEC default enablement is
configured via the NVM and SW should not be overriding these defaults
in this function.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:26:08 +0000 (11:26 +0800)]
ixgbe/base: add X550em KR/iXFI internal link mode support
This patch adds support for x550em KR/iXFI internal link modes. The initial
x550em-10GBASET and x550em-SFP designs use iXFI internal link mode between
the internal PHY and the external PHY.
However future designs will use a KR internal link. This patch is intended
to future proof the driver by adding the KR internal link support in the
driver now.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:26:12 +0000 (11:26 +0800)]
ixgbe/base: update EEE/FEC support for X550EM_X_KR
EEE(Energy Efficient Ethernet) is not supported on the initial revision
of IXGBE_DEV_ID_X550EM_X_KR. We determine the revision by reading a fuse
register.
Also, the requirements for FEC(Forward Error Correction) have changed
slightly. Now, we don't change the "request" bit at all. When EEE is
enabled, we advertise that we are capable. When EEE is disabled, we do
not advertise that we are capable. This change makes us consistent with
the power-on defaults that are in the NVM.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:26:03 +0000 (11:26 +0800)]
ixgbe/base: enable X550 FEC when EEE is disabled
The FEC(Forward Error Correction) feature had been disabled
because it increases power consumption. However, some customers
want to use it. This patch enables FEC when EEE(Energy Efficient
Ethernet) is disabled; FEC was already being disabled when EEE
was enabled, but now both are done in the same function. The two
features are not allowed to be enabled at the same time. The two
features cannot both be disabled. If this ability is ever
determined to be needed, we will need to define a new user parameter
to control FEC independently of EEE.
Fixes: d4c9ffd4fe1c ("ixgbe/base: disable X550em FEC to save power") Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:26:07 +0000 (11:26 +0800)]
ixgbe/base: check for functional CS4227 ucode
During init, check the ucode running in the CS4227. If
it is not responding correctly, reset the part. This is
a global reset so it must only be done the first time a
driver loads after power-on.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:26:00 +0000 (11:26 +0800)]
ixgbe/base: fix X550em UniPHY link configuration
In UniPHY we have 2 IOSF targets that are UniPHY related. We can
write to PHY and PCS. In earlier times I've been told that there
were 2 separate PCS targets for IOSF commands and that's why I
implemented it with 2 defines and adding hw->bus.lan_id, but lately
I confirmed with HW that FW takes care of which PCS "slice" we are
talking to and is directing writes to correct one, so KX4_PCS1
target is dead now and we cannot use it.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:25:58 +0000 (11:25 +0800)]
ixgbe/base: power down the X550em PHY on overtemp event
This patch powers down the x550em PHY on over-temp events. The
PHY firmware is supposed to do this autonomously but that isn't
implemented. The short-term stop-gap solution is for SW to power
down the PHY when it reports an overtemp event.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:25:53 +0000 (11:25 +0800)]
ixgbe/base: fix X550em link setup without SFP
This patch updates the x550em SFP link setup by adding
ixgbe_sfp_type_unknown and ixgbe_sfp_type_not_present case expression
to the ixgbe_setup_mac_link_sfp_x550em SFP type switch statement. This
handles the case when no module is present.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:25:52 +0000 (11:25 +0800)]
ixgbe/base: fix X550em SFP+ link stability
Configure the CS4227 correctly for both 1G and 10G operation,
by moving the code to ixgbe_setup_mac_link_sfp_x550em(). It
needs to be in this function because we need both the module
type and the speed, and this is the only function in the init
flow that knows the speed. In contrast,
ixgbe_setup_sfp_modules_X550em() does not know the speed, so we
can't do anything useful here. This is a fundamental difference
from the 82599 flow.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:25:59 +0000 (11:25 +0800)]
ixgbe/base: restore advertised autoneg after setting X550em LPLU
On systems that support LPLU in the firmware, the driver wouldn't be
aware of the LPLU speed change, and it wouldn't cache the new value when
the driver resumes. This patch emulates the same behavior by restoring
the previous autoneg settings to autoneg_advertised.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:25:51 +0000 (11:25 +0800)]
ixgbe/base: update X550em LPLU
This patch updates x550em LPLU (Low Power Link Up) to use the
MAC ops setup_link function pointer.
This removes redundant code and provides iXFI and KR support
between internal and external PHY.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:26:21 +0000 (11:26 +0800)]
ixgbe/base: fix X550 PCIe master disabling
This patch skips the PCI transactions pending check in
ixgbe_disable_pcie_master. The PCI transactions pending bit sticks high
when there were pending transactions, we should wait and then continue
with our reset flow.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
Wenzhuo Lu [Wed, 24 Jun 2015 03:26:20 +0000 (11:26 +0800)]
ixgbe/base: change register definition code style
This path changes ((P == 0) ? (<value for port 0>) : (<value for port 1>))
register definition into ((P) ? <value for port 1> : <value for port 0>)
style.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com> Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch adds a coccinelle (see http://coccinelle.lip6.fr/)
transform to use the newly added rte_pktmbuf_mtod_offset() helper. In
addition, we add a simple script to apply all available transforms to
a codebase.
There are a number of instances in the code where rte_pktmbuf_mtod()
is used to get the mbuf data pointer, only to add an offset before
casting the result to some other header type. This patch adds a new
rte_pktmbuf_mtod_offset() macro to eliminate these awful double cast
situations.
On machines that are strict on pointer alignment, current code breaks
on GCC's -Wcast-align checks on casts from narrower to wider types.
This patch introduces new unaligned_uint(16|32|64)_t types, which
correctly retain alignment in such cases. Strict alignment
architectures will need to define CONFIG_RTE_ARCH_STRICT_ALIGN in
order to effect these new types.
Since sig_tbl_bucket_size and key_tbl_key_size are explicitly aligned
at initialization, offset dereferences in the hash table code cannot
possibly be unaligned. However, the compiler is unaware of this fact
and complains on -Wcast-align. This patch modifies the code to use
RTE_PTR_ADD(), thereby silencing the compiler by casting through (void
*).
Statistics offsets in the rte_stats_strings[] array are always 64-bit aligned.
However, the compiler is unaware of this fact and complains on -Wcast-align.
This patch modifies the code to use RTE_PTR_ADD(), thereby silencing the
compiler by casting through (void *).
Translating from an mbuf element to the mbuf pointer does not break alignment
constraints. However, the compiler is unaware of this fact and complains on
-Wcast-align. This patch modifies the code to use RTE_PTR_SUB(), thereby
silencing the compiler by casting through (void *).
Translating from a mempool object to the mempool pointer does not break
alignment constraints. However, the compiler is unaware of this fact and
complains on -Wcast-align. This patch modifies the code to use RTE_PTR_SUB(),
thereby silencing the compiler by casting through (void *).
John McNamara [Tue, 23 Jun 2015 12:07:47 +0000 (13:07 +0100)]
mempool: fix doxygen documentation
Added Doxygen @param for missing API parameter in
rte_mempool_obj_iter(), to fix Doxygen warning. Also added
minor grammar fixes to that function documentation.
Signed-off-by: John McNamara <john.mcnamara@intel.com> Acked-by: Olivier Matz <olivier.matz@6wind.com>
Anatoly Burakov [Wed, 10 Jun 2015 10:19:21 +0000 (11:19 +0100)]
pci: fix licenses
Fixes: 88701645c98c ("eal: move interrupt type out of igb_uio") Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
git.droids-corp.org / dpdk.git / log