ethdev: increase port id range
[dpdk.git] / examples / l3fwd-power / main.c
1 /*-
2  *   BSD LICENSE
3  *
4  *   Copyright(c) 2010-2016 Intel Corporation. All rights reserved.
5  *   All rights reserved.
6  *
7  *   Redistribution and use in source and binary forms, with or without
8  *   modification, are permitted provided that the following conditions
9  *   are met:
10  *
11  *     * Redistributions of source code must retain the above copyright
12  *       notice, this list of conditions and the following disclaimer.
13  *     * Redistributions in binary form must reproduce the above copyright
14  *       notice, this list of conditions and the following disclaimer in
15  *       the documentation and/or other materials provided with the
16  *       distribution.
17  *     * Neither the name of Intel Corporation nor the names of its
18  *       contributors may be used to endorse or promote products derived
19  *       from this software without specific prior written permission.
20  *
21  *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22  *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23  *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24  *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25  *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26  *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27  *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28  *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29  *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  */
33
34 #include <stdio.h>
35 #include <stdlib.h>
36 #include <stdint.h>
37 #include <inttypes.h>
38 #include <sys/types.h>
39 #include <string.h>
40 #include <sys/queue.h>
41 #include <stdarg.h>
42 #include <errno.h>
43 #include <getopt.h>
44 #include <unistd.h>
45 #include <signal.h>
46
47 #include <rte_common.h>
48 #include <rte_byteorder.h>
49 #include <rte_log.h>
50 #include <rte_malloc.h>
51 #include <rte_memory.h>
52 #include <rte_memcpy.h>
53 #include <rte_memzone.h>
54 #include <rte_eal.h>
55 #include <rte_launch.h>
56 #include <rte_atomic.h>
57 #include <rte_cycles.h>
58 #include <rte_prefetch.h>
59 #include <rte_lcore.h>
60 #include <rte_per_lcore.h>
61 #include <rte_branch_prediction.h>
62 #include <rte_interrupts.h>
63 #include <rte_pci.h>
64 #include <rte_random.h>
65 #include <rte_debug.h>
66 #include <rte_ether.h>
67 #include <rte_ethdev.h>
68 #include <rte_mempool.h>
69 #include <rte_mbuf.h>
70 #include <rte_ip.h>
71 #include <rte_tcp.h>
72 #include <rte_udp.h>
73 #include <rte_string_fns.h>
74 #include <rte_timer.h>
75 #include <rte_power.h>
76 #include <rte_spinlock.h>
77
78 #define RTE_LOGTYPE_L3FWD_POWER RTE_LOGTYPE_USER1
79
80 #define MAX_PKT_BURST 32
81
82 #define MIN_ZERO_POLL_COUNT 10
83
84 /* around 100ms at 2 Ghz */
85 #define TIMER_RESOLUTION_CYCLES           200000000ULL
86 /* 100 ms interval */
87 #define TIMER_NUMBER_PER_SECOND           10
88 /* 100000 us */
89 #define SCALING_PERIOD                    (1000000/TIMER_NUMBER_PER_SECOND)
90 #define SCALING_DOWN_TIME_RATIO_THRESHOLD 0.25
91
92 #define APP_LOOKUP_EXACT_MATCH          0
93 #define APP_LOOKUP_LPM                  1
94 #define DO_RFC_1812_CHECKS
95
96 #ifndef APP_LOOKUP_METHOD
97 #define APP_LOOKUP_METHOD             APP_LOOKUP_LPM
98 #endif
99
100 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
101 #include <rte_hash.h>
102 #elif (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
103 #include <rte_lpm.h>
104 #else
105 #error "APP_LOOKUP_METHOD set to incorrect value"
106 #endif
107
108 #ifndef IPv6_BYTES
109 #define IPv6_BYTES_FMT "%02x%02x:%02x%02x:%02x%02x:%02x%02x:"\
110                        "%02x%02x:%02x%02x:%02x%02x:%02x%02x"
111 #define IPv6_BYTES(addr) \
112         addr[0],  addr[1], addr[2],  addr[3], \
113         addr[4],  addr[5], addr[6],  addr[7], \
114         addr[8],  addr[9], addr[10], addr[11],\
115         addr[12], addr[13],addr[14], addr[15]
116 #endif
117
118 #define MAX_JUMBO_PKT_LEN  9600
119
120 #define IPV6_ADDR_LEN 16
121
122 #define MEMPOOL_CACHE_SIZE 256
123
124 /*
125  * This expression is used to calculate the number of mbufs needed depending on
126  * user input, taking into account memory for rx and tx hardware rings, cache
127  * per lcore and mtable per port per lcore. RTE_MAX is used to ensure that
128  * NB_MBUF never goes below a minimum value of 8192.
129  */
130
131 #define NB_MBUF RTE_MAX ( \
132         (nb_ports*nb_rx_queue*nb_rxd + \
133         nb_ports*nb_lcores*MAX_PKT_BURST + \
134         nb_ports*n_tx_queue*nb_txd + \
135         nb_lcores*MEMPOOL_CACHE_SIZE), \
136         (unsigned)8192)
137
138 #define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
139
140 #define NB_SOCKETS 8
141
142 /* Configure how many packets ahead to prefetch, when reading packets */
143 #define PREFETCH_OFFSET 3
144
145 /*
146  * Configurable number of RX/TX ring descriptors
147  */
148 #define RTE_TEST_RX_DESC_DEFAULT 512
149 #define RTE_TEST_TX_DESC_DEFAULT 512
150 static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
151 static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
152
153 /* ethernet addresses of ports */
154 static struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
155
156 /* ethernet addresses of ports */
157 static rte_spinlock_t locks[RTE_MAX_ETHPORTS];
158
159 /* mask of enabled ports */
160 static uint32_t enabled_port_mask = 0;
161 /* Ports set in promiscuous mode off by default. */
162 static int promiscuous_on = 0;
163 /* NUMA is enabled by default. */
164 static int numa_on = 1;
165 static int parse_ptype; /**< Parse packet type using rx callback, and */
166                         /**< disabled by default */
167
168 enum freq_scale_hint_t
169 {
170         FREQ_LOWER    =      -1,
171         FREQ_CURRENT  =       0,
172         FREQ_HIGHER   =       1,
173         FREQ_HIGHEST  =       2
174 };
175
176 struct lcore_rx_queue {
177         uint16_t port_id;
178         uint8_t queue_id;
179         enum freq_scale_hint_t freq_up_hint;
180         uint32_t zero_rx_packet_count;
181         uint32_t idle_hint;
182 } __rte_cache_aligned;
183
184 #define MAX_RX_QUEUE_PER_LCORE 16
185 #define MAX_TX_QUEUE_PER_PORT RTE_MAX_ETHPORTS
186 #define MAX_RX_QUEUE_PER_PORT 128
187
188 #define MAX_RX_QUEUE_INTERRUPT_PER_PORT 16
189
190
191 #define MAX_LCORE_PARAMS 1024
192 struct lcore_params {
193         uint16_t port_id;
194         uint8_t queue_id;
195         uint8_t lcore_id;
196 } __rte_cache_aligned;
197
198 static struct lcore_params lcore_params_array[MAX_LCORE_PARAMS];
199 static struct lcore_params lcore_params_array_default[] = {
200         {0, 0, 2},
201         {0, 1, 2},
202         {0, 2, 2},
203         {1, 0, 2},
204         {1, 1, 2},
205         {1, 2, 2},
206         {2, 0, 2},
207         {3, 0, 3},
208         {3, 1, 3},
209 };
210
211 static struct lcore_params * lcore_params = lcore_params_array_default;
212 static uint16_t nb_lcore_params = sizeof(lcore_params_array_default) /
213                                 sizeof(lcore_params_array_default[0]);
214
215 static struct rte_eth_conf port_conf = {
216         .rxmode = {
217                 .mq_mode        = ETH_MQ_RX_RSS,
218                 .max_rx_pkt_len = ETHER_MAX_LEN,
219                 .split_hdr_size = 0,
220                 .header_split   = 0, /**< Header Split disabled */
221                 .hw_ip_checksum = 1, /**< IP checksum offload enabled */
222                 .hw_vlan_filter = 0, /**< VLAN filtering disabled */
223                 .jumbo_frame    = 0, /**< Jumbo Frame Support disabled */
224                 .hw_strip_crc   = 1, /**< CRC stripped by hardware */
225         },
226         .rx_adv_conf = {
227                 .rss_conf = {
228                         .rss_key = NULL,
229                         .rss_hf = ETH_RSS_UDP,
230                 },
231         },
232         .txmode = {
233                 .mq_mode = ETH_MQ_TX_NONE,
234         },
235         .intr_conf = {
236                 .lsc = 1,
237                 .rxq = 1,
238         },
239 };
240
241 static struct rte_mempool * pktmbuf_pool[NB_SOCKETS];
242
243
244 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
245
246 #ifdef RTE_ARCH_X86
247 #include <rte_hash_crc.h>
248 #define DEFAULT_HASH_FUNC       rte_hash_crc
249 #else
250 #include <rte_jhash.h>
251 #define DEFAULT_HASH_FUNC       rte_jhash
252 #endif
253
254 struct ipv4_5tuple {
255         uint32_t ip_dst;
256         uint32_t ip_src;
257         uint16_t port_dst;
258         uint16_t port_src;
259         uint8_t  proto;
260 } __attribute__((__packed__));
261
262 struct ipv6_5tuple {
263         uint8_t  ip_dst[IPV6_ADDR_LEN];
264         uint8_t  ip_src[IPV6_ADDR_LEN];
265         uint16_t port_dst;
266         uint16_t port_src;
267         uint8_t  proto;
268 } __attribute__((__packed__));
269
270 struct ipv4_l3fwd_route {
271         struct ipv4_5tuple key;
272         uint8_t if_out;
273 };
274
275 struct ipv6_l3fwd_route {
276         struct ipv6_5tuple key;
277         uint8_t if_out;
278 };
279
280 static struct ipv4_l3fwd_route ipv4_l3fwd_route_array[] = {
281         {{IPv4(100,10,0,1), IPv4(200,10,0,1), 101, 11, IPPROTO_TCP}, 0},
282         {{IPv4(100,20,0,2), IPv4(200,20,0,2), 102, 12, IPPROTO_TCP}, 1},
283         {{IPv4(100,30,0,3), IPv4(200,30,0,3), 103, 13, IPPROTO_TCP}, 2},
284         {{IPv4(100,40,0,4), IPv4(200,40,0,4), 104, 14, IPPROTO_TCP}, 3},
285 };
286
287 static struct ipv6_l3fwd_route ipv6_l3fwd_route_array[] = {
288         {
289                 {
290                         {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
291                          0x02, 0x1b, 0x21, 0xff, 0xfe, 0x91, 0x38, 0x05},
292                         {0xfe, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
293                          0x02, 0x1e, 0x67, 0xff, 0xfe, 0x0d, 0xb6, 0x0a},
294                          1, 10, IPPROTO_UDP
295                 }, 4
296         },
297 };
298
299 typedef struct rte_hash lookup_struct_t;
300 static lookup_struct_t *ipv4_l3fwd_lookup_struct[NB_SOCKETS];
301 static lookup_struct_t *ipv6_l3fwd_lookup_struct[NB_SOCKETS];
302
303 #define L3FWD_HASH_ENTRIES      1024
304
305 #define IPV4_L3FWD_NUM_ROUTES \
306         (sizeof(ipv4_l3fwd_route_array) / sizeof(ipv4_l3fwd_route_array[0]))
307
308 #define IPV6_L3FWD_NUM_ROUTES \
309         (sizeof(ipv6_l3fwd_route_array) / sizeof(ipv6_l3fwd_route_array[0]))
310
311 static uint16_t ipv4_l3fwd_out_if[L3FWD_HASH_ENTRIES] __rte_cache_aligned;
312 static uint16_t ipv6_l3fwd_out_if[L3FWD_HASH_ENTRIES] __rte_cache_aligned;
313 #endif
314
315 #if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
316 struct ipv4_l3fwd_route {
317         uint32_t ip;
318         uint8_t  depth;
319         uint8_t  if_out;
320 };
321
322 static struct ipv4_l3fwd_route ipv4_l3fwd_route_array[] = {
323         {IPv4(1,1,1,0), 24, 0},
324         {IPv4(2,1,1,0), 24, 1},
325         {IPv4(3,1,1,0), 24, 2},
326         {IPv4(4,1,1,0), 24, 3},
327         {IPv4(5,1,1,0), 24, 4},
328         {IPv4(6,1,1,0), 24, 5},
329         {IPv4(7,1,1,0), 24, 6},
330         {IPv4(8,1,1,0), 24, 7},
331 };
332
333 #define IPV4_L3FWD_NUM_ROUTES \
334         (sizeof(ipv4_l3fwd_route_array) / sizeof(ipv4_l3fwd_route_array[0]))
335
336 #define IPV4_L3FWD_LPM_MAX_RULES     1024
337
338 typedef struct rte_lpm lookup_struct_t;
339 static lookup_struct_t *ipv4_l3fwd_lookup_struct[NB_SOCKETS];
340 #endif
341
342 struct lcore_conf {
343         uint16_t n_rx_queue;
344         struct lcore_rx_queue rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
345         uint16_t n_tx_port;
346         uint16_t tx_port_id[RTE_MAX_ETHPORTS];
347         uint16_t tx_queue_id[RTE_MAX_ETHPORTS];
348         struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS];
349         lookup_struct_t * ipv4_lookup_struct;
350         lookup_struct_t * ipv6_lookup_struct;
351 } __rte_cache_aligned;
352
353 struct lcore_stats {
354         /* total sleep time in ms since last frequency scaling down */
355         uint32_t sleep_time;
356         /* number of long sleep recently */
357         uint32_t nb_long_sleep;
358         /* freq. scaling up trend */
359         uint32_t trend;
360         /* total packet processed recently */
361         uint64_t nb_rx_processed;
362         /* total iterations looped recently */
363         uint64_t nb_iteration_looped;
364         uint32_t padding[9];
365 } __rte_cache_aligned;
366
367 static struct lcore_conf lcore_conf[RTE_MAX_LCORE] __rte_cache_aligned;
368 static struct lcore_stats stats[RTE_MAX_LCORE] __rte_cache_aligned;
369 static struct rte_timer power_timers[RTE_MAX_LCORE];
370
371 static inline uint32_t power_idle_heuristic(uint32_t zero_rx_packet_count);
372 static inline enum freq_scale_hint_t power_freq_scaleup_heuristic( \
373                 unsigned int lcore_id, uint16_t port_id, uint16_t queue_id);
374
375 /* exit signal handler */
376 static void
377 signal_exit_now(int sigtype)
378 {
379         unsigned lcore_id;
380         unsigned int portid, nb_ports;
381         int ret;
382
383         if (sigtype == SIGINT) {
384                 for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
385                         if (rte_lcore_is_enabled(lcore_id) == 0)
386                                 continue;
387
388                         /* init power management library */
389                         ret = rte_power_exit(lcore_id);
390                         if (ret)
391                                 rte_exit(EXIT_FAILURE, "Power management "
392                                         "library de-initialization failed on "
393                                                         "core%u\n", lcore_id);
394                 }
395
396                 nb_ports = rte_eth_dev_count();
397                 for (portid = 0; portid < nb_ports; portid++) {
398                         if ((enabled_port_mask & (1 << portid)) == 0)
399                                 continue;
400
401                         rte_eth_dev_stop(portid);
402                         rte_eth_dev_close(portid);
403                 }
404         }
405
406         rte_exit(EXIT_SUCCESS, "User forced exit\n");
407 }
408
409 /*  Freqency scale down timer callback */
410 static void
411 power_timer_cb(__attribute__((unused)) struct rte_timer *tim,
412                           __attribute__((unused)) void *arg)
413 {
414         uint64_t hz;
415         float sleep_time_ratio;
416         unsigned lcore_id = rte_lcore_id();
417
418         /* accumulate total execution time in us when callback is invoked */
419         sleep_time_ratio = (float)(stats[lcore_id].sleep_time) /
420                                         (float)SCALING_PERIOD;
421         /**
422          * check whether need to scale down frequency a step if it sleep a lot.
423          */
424         if (sleep_time_ratio >= SCALING_DOWN_TIME_RATIO_THRESHOLD) {
425                 if (rte_power_freq_down)
426                         rte_power_freq_down(lcore_id);
427         }
428         else if ( (unsigned)(stats[lcore_id].nb_rx_processed /
429                 stats[lcore_id].nb_iteration_looped) < MAX_PKT_BURST) {
430                 /**
431                  * scale down a step if average packet per iteration less
432                  * than expectation.
433                  */
434                 if (rte_power_freq_down)
435                         rte_power_freq_down(lcore_id);
436         }
437
438         /**
439          * initialize another timer according to current frequency to ensure
440          * timer interval is relatively fixed.
441          */
442         hz = rte_get_timer_hz();
443         rte_timer_reset(&power_timers[lcore_id], hz/TIMER_NUMBER_PER_SECOND,
444                                 SINGLE, lcore_id, power_timer_cb, NULL);
445
446         stats[lcore_id].nb_rx_processed = 0;
447         stats[lcore_id].nb_iteration_looped = 0;
448
449         stats[lcore_id].sleep_time = 0;
450 }
451
452 /* Enqueue a single packet, and send burst if queue is filled */
453 static inline int
454 send_single_packet(struct rte_mbuf *m, uint8_t port)
455 {
456         uint32_t lcore_id;
457         struct lcore_conf *qconf;
458
459         lcore_id = rte_lcore_id();
460         qconf = &lcore_conf[lcore_id];
461
462         rte_eth_tx_buffer(port, qconf->tx_queue_id[port],
463                         qconf->tx_buffer[port], m);
464
465         return 0;
466 }
467
468 #ifdef DO_RFC_1812_CHECKS
469 static inline int
470 is_valid_ipv4_pkt(struct ipv4_hdr *pkt, uint32_t link_len)
471 {
472         /* From http://www.rfc-editor.org/rfc/rfc1812.txt section 5.2.2 */
473         /*
474          * 1. The packet length reported by the Link Layer must be large
475          * enough to hold the minimum length legal IP datagram (20 bytes).
476          */
477         if (link_len < sizeof(struct ipv4_hdr))
478                 return -1;
479
480         /* 2. The IP checksum must be correct. */
481         /* this is checked in H/W */
482
483         /*
484          * 3. The IP version number must be 4. If the version number is not 4
485          * then the packet may be another version of IP, such as IPng or
486          * ST-II.
487          */
488         if (((pkt->version_ihl) >> 4) != 4)
489                 return -3;
490         /*
491          * 4. The IP header length field must be large enough to hold the
492          * minimum length legal IP datagram (20 bytes = 5 words).
493          */
494         if ((pkt->version_ihl & 0xf) < 5)
495                 return -4;
496
497         /*
498          * 5. The IP total length field must be large enough to hold the IP
499          * datagram header, whose length is specified in the IP header length
500          * field.
501          */
502         if (rte_cpu_to_be_16(pkt->total_length) < sizeof(struct ipv4_hdr))
503                 return -5;
504
505         return 0;
506 }
507 #endif
508
509 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
510 static void
511 print_ipv4_key(struct ipv4_5tuple key)
512 {
513         printf("IP dst = %08x, IP src = %08x, port dst = %d, port src = %d, "
514                 "proto = %d\n", (unsigned)key.ip_dst, (unsigned)key.ip_src,
515                                 key.port_dst, key.port_src, key.proto);
516 }
517 static void
518 print_ipv6_key(struct ipv6_5tuple key)
519 {
520         printf( "IP dst = " IPv6_BYTES_FMT ", IP src = " IPv6_BYTES_FMT ", "
521                 "port dst = %d, port src = %d, proto = %d\n",
522                 IPv6_BYTES(key.ip_dst), IPv6_BYTES(key.ip_src),
523                 key.port_dst, key.port_src, key.proto);
524 }
525
526 static inline uint16_t
527 get_ipv4_dst_port(struct ipv4_hdr *ipv4_hdr, uint16_t portid,
528                 lookup_struct_t * ipv4_l3fwd_lookup_struct)
529 {
530         struct ipv4_5tuple key;
531         struct tcp_hdr *tcp;
532         struct udp_hdr *udp;
533         int ret = 0;
534
535         key.ip_dst = rte_be_to_cpu_32(ipv4_hdr->dst_addr);
536         key.ip_src = rte_be_to_cpu_32(ipv4_hdr->src_addr);
537         key.proto = ipv4_hdr->next_proto_id;
538
539         switch (ipv4_hdr->next_proto_id) {
540         case IPPROTO_TCP:
541                 tcp = (struct tcp_hdr *)((unsigned char *)ipv4_hdr +
542                                         sizeof(struct ipv4_hdr));
543                 key.port_dst = rte_be_to_cpu_16(tcp->dst_port);
544                 key.port_src = rte_be_to_cpu_16(tcp->src_port);
545                 break;
546
547         case IPPROTO_UDP:
548                 udp = (struct udp_hdr *)((unsigned char *)ipv4_hdr +
549                                         sizeof(struct ipv4_hdr));
550                 key.port_dst = rte_be_to_cpu_16(udp->dst_port);
551                 key.port_src = rte_be_to_cpu_16(udp->src_port);
552                 break;
553
554         default:
555                 key.port_dst = 0;
556                 key.port_src = 0;
557                 break;
558         }
559
560         /* Find destination port */
561         ret = rte_hash_lookup(ipv4_l3fwd_lookup_struct, (const void *)&key);
562         return ((ret < 0) ? portid : ipv4_l3fwd_out_if[ret]);
563 }
564
565 static inline uint16_t
566 get_ipv6_dst_port(struct ipv6_hdr *ipv6_hdr, uint16_t portid,
567                         lookup_struct_t *ipv6_l3fwd_lookup_struct)
568 {
569         struct ipv6_5tuple key;
570         struct tcp_hdr *tcp;
571         struct udp_hdr *udp;
572         int ret = 0;
573
574         memcpy(key.ip_dst, ipv6_hdr->dst_addr, IPV6_ADDR_LEN);
575         memcpy(key.ip_src, ipv6_hdr->src_addr, IPV6_ADDR_LEN);
576
577         key.proto = ipv6_hdr->proto;
578
579         switch (ipv6_hdr->proto) {
580         case IPPROTO_TCP:
581                 tcp = (struct tcp_hdr *)((unsigned char *) ipv6_hdr +
582                                         sizeof(struct ipv6_hdr));
583                 key.port_dst = rte_be_to_cpu_16(tcp->dst_port);
584                 key.port_src = rte_be_to_cpu_16(tcp->src_port);
585                 break;
586
587         case IPPROTO_UDP:
588                 udp = (struct udp_hdr *)((unsigned char *) ipv6_hdr +
589                                         sizeof(struct ipv6_hdr));
590                 key.port_dst = rte_be_to_cpu_16(udp->dst_port);
591                 key.port_src = rte_be_to_cpu_16(udp->src_port);
592                 break;
593
594         default:
595                 key.port_dst = 0;
596                 key.port_src = 0;
597                 break;
598         }
599
600         /* Find destination port */
601         ret = rte_hash_lookup(ipv6_l3fwd_lookup_struct, (const void *)&key);
602         return ((ret < 0) ? portid : ipv6_l3fwd_out_if[ret]);
603 }
604 #endif
605
606 #if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
607 static inline uint16_t
608 get_ipv4_dst_port(struct ipv4_hdr *ipv4_hdr, uint16_t portid,
609                 lookup_struct_t *ipv4_l3fwd_lookup_struct)
610 {
611         uint32_t next_hop;
612
613         return ((rte_lpm_lookup(ipv4_l3fwd_lookup_struct,
614                         rte_be_to_cpu_32(ipv4_hdr->dst_addr), &next_hop) == 0)?
615                         next_hop : portid);
616 }
617 #endif
618
619 static inline void
620 parse_ptype_one(struct rte_mbuf *m)
621 {
622         struct ether_hdr *eth_hdr;
623         uint32_t packet_type = RTE_PTYPE_UNKNOWN;
624         uint16_t ether_type;
625
626         eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
627         ether_type = eth_hdr->ether_type;
628         if (ether_type == rte_cpu_to_be_16(ETHER_TYPE_IPv4))
629                 packet_type |= RTE_PTYPE_L3_IPV4_EXT_UNKNOWN;
630         else if (ether_type == rte_cpu_to_be_16(ETHER_TYPE_IPv6))
631                 packet_type |= RTE_PTYPE_L3_IPV6_EXT_UNKNOWN;
632
633         m->packet_type = packet_type;
634 }
635
636 static uint16_t
637 cb_parse_ptype(uint16_t port __rte_unused, uint16_t queue __rte_unused,
638                struct rte_mbuf *pkts[], uint16_t nb_pkts,
639                uint16_t max_pkts __rte_unused,
640                void *user_param __rte_unused)
641 {
642         unsigned int i;
643
644         for (i = 0; i < nb_pkts; ++i)
645                 parse_ptype_one(pkts[i]);
646
647         return nb_pkts;
648 }
649
650 static int
651 add_cb_parse_ptype(uint16_t portid, uint16_t queueid)
652 {
653         printf("Port %d: softly parse packet type info\n", portid);
654         if (rte_eth_add_rx_callback(portid, queueid, cb_parse_ptype, NULL))
655                 return 0;
656
657         printf("Failed to add rx callback: port=%d\n", portid);
658         return -1;
659 }
660
661 static inline void
662 l3fwd_simple_forward(struct rte_mbuf *m, uint8_t portid,
663                                 struct lcore_conf *qconf)
664 {
665         struct ether_hdr *eth_hdr;
666         struct ipv4_hdr *ipv4_hdr;
667         void *d_addr_bytes;
668         uint16_t dst_port;
669
670         eth_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
671
672         if (RTE_ETH_IS_IPV4_HDR(m->packet_type)) {
673                 /* Handle IPv4 headers.*/
674                 ipv4_hdr =
675                         rte_pktmbuf_mtod_offset(m, struct ipv4_hdr *,
676                                                 sizeof(struct ether_hdr));
677
678 #ifdef DO_RFC_1812_CHECKS
679                 /* Check to make sure the packet is valid (RFC1812) */
680                 if (is_valid_ipv4_pkt(ipv4_hdr, m->pkt_len) < 0) {
681                         rte_pktmbuf_free(m);
682                         return;
683                 }
684 #endif
685
686                 dst_port = get_ipv4_dst_port(ipv4_hdr, portid,
687                                         qconf->ipv4_lookup_struct);
688                 if (dst_port >= RTE_MAX_ETHPORTS ||
689                                 (enabled_port_mask & 1 << dst_port) == 0)
690                         dst_port = portid;
691
692                 /* 02:00:00:00:00:xx */
693                 d_addr_bytes = &eth_hdr->d_addr.addr_bytes[0];
694                 *((uint64_t *)d_addr_bytes) =
695                         0x000000000002 + ((uint64_t)dst_port << 40);
696
697 #ifdef DO_RFC_1812_CHECKS
698                 /* Update time to live and header checksum */
699                 --(ipv4_hdr->time_to_live);
700                 ++(ipv4_hdr->hdr_checksum);
701 #endif
702
703                 /* src addr */
704                 ether_addr_copy(&ports_eth_addr[dst_port], &eth_hdr->s_addr);
705
706                 send_single_packet(m, dst_port);
707         } else if (RTE_ETH_IS_IPV6_HDR(m->packet_type)) {
708                 /* Handle IPv6 headers.*/
709 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
710                 struct ipv6_hdr *ipv6_hdr;
711
712                 ipv6_hdr =
713                         rte_pktmbuf_mtod_offset(m, struct ipv6_hdr *,
714                                                 sizeof(struct ether_hdr));
715
716                 dst_port = get_ipv6_dst_port(ipv6_hdr, portid,
717                                         qconf->ipv6_lookup_struct);
718
719                 if (dst_port >= RTE_MAX_ETHPORTS ||
720                                 (enabled_port_mask & 1 << dst_port) == 0)
721                         dst_port = portid;
722
723                 /* 02:00:00:00:00:xx */
724                 d_addr_bytes = &eth_hdr->d_addr.addr_bytes[0];
725                 *((uint64_t *)d_addr_bytes) =
726                         0x000000000002 + ((uint64_t)dst_port << 40);
727
728                 /* src addr */
729                 ether_addr_copy(&ports_eth_addr[dst_port], &eth_hdr->s_addr);
730
731                 send_single_packet(m, dst_port);
732 #else
733                 /* We don't currently handle IPv6 packets in LPM mode. */
734                 rte_pktmbuf_free(m);
735 #endif
736         } else
737                 rte_pktmbuf_free(m);
738
739 }
740
741 #define MINIMUM_SLEEP_TIME         1
742 #define SUSPEND_THRESHOLD          300
743
744 static inline uint32_t
745 power_idle_heuristic(uint32_t zero_rx_packet_count)
746 {
747         /* If zero count is less than 100,  sleep 1us */
748         if (zero_rx_packet_count < SUSPEND_THRESHOLD)
749                 return MINIMUM_SLEEP_TIME;
750         /* If zero count is less than 1000, sleep 100 us which is the
751                 minimum latency switching from C3/C6 to C0
752         */
753         else
754                 return SUSPEND_THRESHOLD;
755
756         return 0;
757 }
758
759 static inline enum freq_scale_hint_t
760 power_freq_scaleup_heuristic(unsigned lcore_id,
761                              uint16_t port_id,
762                              uint16_t queue_id)
763 {
764 /**
765  * HW Rx queue size is 128 by default, Rx burst read at maximum 32 entries
766  * per iteration
767  */
768 #define FREQ_GEAR1_RX_PACKET_THRESHOLD             MAX_PKT_BURST
769 #define FREQ_GEAR2_RX_PACKET_THRESHOLD             (MAX_PKT_BURST*2)
770 #define FREQ_GEAR3_RX_PACKET_THRESHOLD             (MAX_PKT_BURST*3)
771 #define FREQ_UP_TREND1_ACC   1
772 #define FREQ_UP_TREND2_ACC   100
773 #define FREQ_UP_THRESHOLD    10000
774
775         if (likely(rte_eth_rx_descriptor_done(port_id, queue_id,
776                         FREQ_GEAR3_RX_PACKET_THRESHOLD) > 0)) {
777                 stats[lcore_id].trend = 0;
778                 return FREQ_HIGHEST;
779         } else if (likely(rte_eth_rx_descriptor_done(port_id, queue_id,
780                         FREQ_GEAR2_RX_PACKET_THRESHOLD) > 0))
781                 stats[lcore_id].trend += FREQ_UP_TREND2_ACC;
782         else if (likely(rte_eth_rx_descriptor_done(port_id, queue_id,
783                         FREQ_GEAR1_RX_PACKET_THRESHOLD) > 0))
784                 stats[lcore_id].trend += FREQ_UP_TREND1_ACC;
785
786         if (likely(stats[lcore_id].trend > FREQ_UP_THRESHOLD)) {
787                 stats[lcore_id].trend = 0;
788                 return FREQ_HIGHER;
789         }
790
791         return FREQ_CURRENT;
792 }
793
794 /**
795  * force polling thread sleep until one-shot rx interrupt triggers
796  * @param port_id
797  *  Port id.
798  * @param queue_id
799  *  Rx queue id.
800  * @return
801  *  0 on success
802  */
803 static int
804 sleep_until_rx_interrupt(int num)
805 {
806         struct rte_epoll_event event[num];
807         int n, i;
808         uint16_t port_id;
809         uint8_t queue_id;
810         void *data;
811
812         RTE_LOG(INFO, L3FWD_POWER,
813                 "lcore %u sleeps until interrupt triggers\n",
814                 rte_lcore_id());
815
816         n = rte_epoll_wait(RTE_EPOLL_PER_THREAD, event, num, -1);
817         for (i = 0; i < n; i++) {
818                 data = event[i].epdata.data;
819                 port_id = ((uintptr_t)data) >> CHAR_BIT;
820                 queue_id = ((uintptr_t)data) &
821                         RTE_LEN2MASK(CHAR_BIT, uint8_t);
822                 rte_eth_dev_rx_intr_disable(port_id, queue_id);
823                 RTE_LOG(INFO, L3FWD_POWER,
824                         "lcore %u is waked up from rx interrupt on"
825                         " port %d queue %d\n",
826                         rte_lcore_id(), port_id, queue_id);
827         }
828
829         return 0;
830 }
831
832 static void turn_on_intr(struct lcore_conf *qconf)
833 {
834         int i;
835         struct lcore_rx_queue *rx_queue;
836         uint8_t queue_id;
837         uint16_t port_id;
838
839         for (i = 0; i < qconf->n_rx_queue; ++i) {
840                 rx_queue = &(qconf->rx_queue_list[i]);
841                 port_id = rx_queue->port_id;
842                 queue_id = rx_queue->queue_id;
843
844                 rte_spinlock_lock(&(locks[port_id]));
845                 rte_eth_dev_rx_intr_enable(port_id, queue_id);
846                 rte_spinlock_unlock(&(locks[port_id]));
847         }
848 }
849
850 static int event_register(struct lcore_conf *qconf)
851 {
852         struct lcore_rx_queue *rx_queue;
853         uint8_t queueid;
854         uint16_t portid;
855         uint32_t data;
856         int ret;
857         int i;
858
859         for (i = 0; i < qconf->n_rx_queue; ++i) {
860                 rx_queue = &(qconf->rx_queue_list[i]);
861                 portid = rx_queue->port_id;
862                 queueid = rx_queue->queue_id;
863                 data = portid << CHAR_BIT | queueid;
864
865                 ret = rte_eth_dev_rx_intr_ctl_q(portid, queueid,
866                                                 RTE_EPOLL_PER_THREAD,
867                                                 RTE_INTR_EVENT_ADD,
868                                                 (void *)((uintptr_t)data));
869                 if (ret)
870                         return ret;
871         }
872
873         return 0;
874 }
875
876 /* main processing loop */
877 static int
878 main_loop(__attribute__((unused)) void *dummy)
879 {
880         struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
881         unsigned lcore_id;
882         uint64_t prev_tsc, diff_tsc, cur_tsc;
883         uint64_t prev_tsc_power = 0, cur_tsc_power, diff_tsc_power;
884         int i, j, nb_rx;
885         uint8_t queueid;
886         uint16_t portid;
887         struct lcore_conf *qconf;
888         struct lcore_rx_queue *rx_queue;
889         enum freq_scale_hint_t lcore_scaleup_hint;
890         uint32_t lcore_rx_idle_count = 0;
891         uint32_t lcore_idle_hint = 0;
892         int intr_en = 0;
893
894         const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
895
896         prev_tsc = 0;
897
898         lcore_id = rte_lcore_id();
899         qconf = &lcore_conf[lcore_id];
900
901         if (qconf->n_rx_queue == 0) {
902                 RTE_LOG(INFO, L3FWD_POWER, "lcore %u has nothing to do\n", lcore_id);
903                 return 0;
904         }
905
906         RTE_LOG(INFO, L3FWD_POWER, "entering main loop on lcore %u\n", lcore_id);
907
908         for (i = 0; i < qconf->n_rx_queue; i++) {
909                 portid = qconf->rx_queue_list[i].port_id;
910                 queueid = qconf->rx_queue_list[i].queue_id;
911                 RTE_LOG(INFO, L3FWD_POWER, " -- lcoreid=%u portid=%u "
912                         "rxqueueid=%hhu\n", lcore_id, portid, queueid);
913         }
914
915         /* add into event wait list */
916         if (event_register(qconf) == 0)
917                 intr_en = 1;
918         else
919                 RTE_LOG(INFO, L3FWD_POWER, "RX interrupt won't enable.\n");
920
921         while (1) {
922                 stats[lcore_id].nb_iteration_looped++;
923
924                 cur_tsc = rte_rdtsc();
925                 cur_tsc_power = cur_tsc;
926
927                 /*
928                  * TX burst queue drain
929                  */
930                 diff_tsc = cur_tsc - prev_tsc;
931                 if (unlikely(diff_tsc > drain_tsc)) {
932                         for (i = 0; i < qconf->n_tx_port; ++i) {
933                                 portid = qconf->tx_port_id[i];
934                                 rte_eth_tx_buffer_flush(portid,
935                                                 qconf->tx_queue_id[portid],
936                                                 qconf->tx_buffer[portid]);
937                         }
938                         prev_tsc = cur_tsc;
939                 }
940
941                 diff_tsc_power = cur_tsc_power - prev_tsc_power;
942                 if (diff_tsc_power > TIMER_RESOLUTION_CYCLES) {
943                         rte_timer_manage();
944                         prev_tsc_power = cur_tsc_power;
945                 }
946
947 start_rx:
948                 /*
949                  * Read packet from RX queues
950                  */
951                 lcore_scaleup_hint = FREQ_CURRENT;
952                 lcore_rx_idle_count = 0;
953                 for (i = 0; i < qconf->n_rx_queue; ++i) {
954                         rx_queue = &(qconf->rx_queue_list[i]);
955                         rx_queue->idle_hint = 0;
956                         portid = rx_queue->port_id;
957                         queueid = rx_queue->queue_id;
958
959                         nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst,
960                                                                 MAX_PKT_BURST);
961
962                         stats[lcore_id].nb_rx_processed += nb_rx;
963                         if (unlikely(nb_rx == 0)) {
964                                 /**
965                                  * no packet received from rx queue, try to
966                                  * sleep for a while forcing CPU enter deeper
967                                  * C states.
968                                  */
969                                 rx_queue->zero_rx_packet_count++;
970
971                                 if (rx_queue->zero_rx_packet_count <=
972                                                         MIN_ZERO_POLL_COUNT)
973                                         continue;
974
975                                 rx_queue->idle_hint = power_idle_heuristic(\
976                                         rx_queue->zero_rx_packet_count);
977                                 lcore_rx_idle_count++;
978                         } else {
979                                 rx_queue->zero_rx_packet_count = 0;
980
981                                 /**
982                                  * do not scale up frequency immediately as
983                                  * user to kernel space communication is costly
984                                  * which might impact packet I/O for received
985                                  * packets.
986                                  */
987                                 rx_queue->freq_up_hint =
988                                         power_freq_scaleup_heuristic(lcore_id,
989                                                         portid, queueid);
990                         }
991
992                         /* Prefetch first packets */
993                         for (j = 0; j < PREFETCH_OFFSET && j < nb_rx; j++) {
994                                 rte_prefetch0(rte_pktmbuf_mtod(
995                                                 pkts_burst[j], void *));
996                         }
997
998                         /* Prefetch and forward already prefetched packets */
999                         for (j = 0; j < (nb_rx - PREFETCH_OFFSET); j++) {
1000                                 rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[
1001                                                 j + PREFETCH_OFFSET], void *));
1002                                 l3fwd_simple_forward(pkts_burst[j], portid,
1003                                                                 qconf);
1004                         }
1005
1006                         /* Forward remaining prefetched packets */
1007                         for (; j < nb_rx; j++) {
1008                                 l3fwd_simple_forward(pkts_burst[j], portid,
1009                                                                 qconf);
1010                         }
1011                 }
1012
1013                 if (likely(lcore_rx_idle_count != qconf->n_rx_queue)) {
1014                         for (i = 1, lcore_scaleup_hint =
1015                                 qconf->rx_queue_list[0].freq_up_hint;
1016                                         i < qconf->n_rx_queue; ++i) {
1017                                 rx_queue = &(qconf->rx_queue_list[i]);
1018                                 if (rx_queue->freq_up_hint >
1019                                                 lcore_scaleup_hint)
1020                                         lcore_scaleup_hint =
1021                                                 rx_queue->freq_up_hint;
1022                         }
1023
1024                         if (lcore_scaleup_hint == FREQ_HIGHEST) {
1025                                 if (rte_power_freq_max)
1026                                         rte_power_freq_max(lcore_id);
1027                         } else if (lcore_scaleup_hint == FREQ_HIGHER) {
1028                                 if (rte_power_freq_up)
1029                                         rte_power_freq_up(lcore_id);
1030                         }
1031                 } else {
1032                         /**
1033                          * All Rx queues empty in recent consecutive polls,
1034                          * sleep in a conservative manner, meaning sleep as
1035                          * less as possible.
1036                          */
1037                         for (i = 1, lcore_idle_hint =
1038                                 qconf->rx_queue_list[0].idle_hint;
1039                                         i < qconf->n_rx_queue; ++i) {
1040                                 rx_queue = &(qconf->rx_queue_list[i]);
1041                                 if (rx_queue->idle_hint < lcore_idle_hint)
1042                                         lcore_idle_hint = rx_queue->idle_hint;
1043                         }
1044
1045                         if (lcore_idle_hint < SUSPEND_THRESHOLD)
1046                                 /**
1047                                  * execute "pause" instruction to avoid context
1048                                  * switch which generally take hundred of
1049                                  * microseconds for short sleep.
1050                                  */
1051                                 rte_delay_us(lcore_idle_hint);
1052                         else {
1053                                 /* suspend until rx interrupt trigges */
1054                                 if (intr_en) {
1055                                         turn_on_intr(qconf);
1056                                         sleep_until_rx_interrupt(
1057                                                 qconf->n_rx_queue);
1058                                 }
1059                                 /* start receiving packets immediately */
1060                                 goto start_rx;
1061                         }
1062                         stats[lcore_id].sleep_time += lcore_idle_hint;
1063                 }
1064         }
1065 }
1066
1067 static int
1068 check_lcore_params(void)
1069 {
1070         uint8_t queue, lcore;
1071         uint16_t i;
1072         int socketid;
1073
1074         for (i = 0; i < nb_lcore_params; ++i) {
1075                 queue = lcore_params[i].queue_id;
1076                 if (queue >= MAX_RX_QUEUE_PER_PORT) {
1077                         printf("invalid queue number: %hhu\n", queue);
1078                         return -1;
1079                 }
1080                 lcore = lcore_params[i].lcore_id;
1081                 if (!rte_lcore_is_enabled(lcore)) {
1082                         printf("error: lcore %hhu is not enabled in lcore "
1083                                                         "mask\n", lcore);
1084                         return -1;
1085                 }
1086                 if ((socketid = rte_lcore_to_socket_id(lcore) != 0) &&
1087                                                         (numa_on == 0)) {
1088                         printf("warning: lcore %hhu is on socket %d with numa "
1089                                                 "off\n", lcore, socketid);
1090                 }
1091         }
1092         return 0;
1093 }
1094
1095 static int
1096 check_port_config(const unsigned nb_ports)
1097 {
1098         unsigned portid;
1099         uint16_t i;
1100
1101         for (i = 0; i < nb_lcore_params; ++i) {
1102                 portid = lcore_params[i].port_id;
1103                 if ((enabled_port_mask & (1 << portid)) == 0) {
1104                         printf("port %u is not enabled in port mask\n",
1105                                                                 portid);
1106                         return -1;
1107                 }
1108                 if (portid >= nb_ports) {
1109                         printf("port %u is not present on the board\n",
1110                                                                 portid);
1111                         return -1;
1112                 }
1113         }
1114         return 0;
1115 }
1116
1117 static uint8_t
1118 get_port_n_rx_queues(const uint8_t port)
1119 {
1120         int queue = -1;
1121         uint16_t i;
1122
1123         for (i = 0; i < nb_lcore_params; ++i) {
1124                 if (lcore_params[i].port_id == port &&
1125                                 lcore_params[i].queue_id > queue)
1126                         queue = lcore_params[i].queue_id;
1127         }
1128         return (uint8_t)(++queue);
1129 }
1130
1131 static int
1132 init_lcore_rx_queues(void)
1133 {
1134         uint16_t i, nb_rx_queue;
1135         uint8_t lcore;
1136
1137         for (i = 0; i < nb_lcore_params; ++i) {
1138                 lcore = lcore_params[i].lcore_id;
1139                 nb_rx_queue = lcore_conf[lcore].n_rx_queue;
1140                 if (nb_rx_queue >= MAX_RX_QUEUE_PER_LCORE) {
1141                         printf("error: too many queues (%u) for lcore: %u\n",
1142                                 (unsigned)nb_rx_queue + 1, (unsigned)lcore);
1143                         return -1;
1144                 } else {
1145                         lcore_conf[lcore].rx_queue_list[nb_rx_queue].port_id =
1146                                 lcore_params[i].port_id;
1147                         lcore_conf[lcore].rx_queue_list[nb_rx_queue].queue_id =
1148                                 lcore_params[i].queue_id;
1149                         lcore_conf[lcore].n_rx_queue++;
1150                 }
1151         }
1152         return 0;
1153 }
1154
1155 /* display usage */
1156 static void
1157 print_usage(const char *prgname)
1158 {
1159         printf ("%s [EAL options] -- -p PORTMASK -P"
1160                 "  [--config (port,queue,lcore)[,(port,queue,lcore]]"
1161                 "  [--enable-jumbo [--max-pkt-len PKTLEN]]\n"
1162                 "  -p PORTMASK: hexadecimal bitmask of ports to configure\n"
1163                 "  -P : enable promiscuous mode\n"
1164                 "  --config (port,queue,lcore): rx queues configuration\n"
1165                 "  --no-numa: optional, disable numa awareness\n"
1166                 "  --enable-jumbo: enable jumbo frame"
1167                 " which max packet len is PKTLEN in decimal (64-9600)\n"
1168                 "  --parse-ptype: parse packet type by software\n",
1169                 prgname);
1170 }
1171
1172 static int parse_max_pkt_len(const char *pktlen)
1173 {
1174         char *end = NULL;
1175         unsigned long len;
1176
1177         /* parse decimal string */
1178         len = strtoul(pktlen, &end, 10);
1179         if ((pktlen[0] == '\0') || (end == NULL) || (*end != '\0'))
1180                 return -1;
1181
1182         if (len == 0)
1183                 return -1;
1184
1185         return len;
1186 }
1187
1188 static int
1189 parse_portmask(const char *portmask)
1190 {
1191         char *end = NULL;
1192         unsigned long pm;
1193
1194         /* parse hexadecimal string */
1195         pm = strtoul(portmask, &end, 16);
1196         if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
1197                 return -1;
1198
1199         if (pm == 0)
1200                 return -1;
1201
1202         return pm;
1203 }
1204
1205 static int
1206 parse_config(const char *q_arg)
1207 {
1208         char s[256];
1209         const char *p, *p0 = q_arg;
1210         char *end;
1211         enum fieldnames {
1212                 FLD_PORT = 0,
1213                 FLD_QUEUE,
1214                 FLD_LCORE,
1215                 _NUM_FLD
1216         };
1217         unsigned long int_fld[_NUM_FLD];
1218         char *str_fld[_NUM_FLD];
1219         int i;
1220         unsigned size;
1221
1222         nb_lcore_params = 0;
1223
1224         while ((p = strchr(p0,'(')) != NULL) {
1225                 ++p;
1226                 if((p0 = strchr(p,')')) == NULL)
1227                         return -1;
1228
1229                 size = p0 - p;
1230                 if(size >= sizeof(s))
1231                         return -1;
1232
1233                 snprintf(s, sizeof(s), "%.*s", size, p);
1234                 if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') !=
1235                                                                 _NUM_FLD)
1236                         return -1;
1237                 for (i = 0; i < _NUM_FLD; i++){
1238                         errno = 0;
1239                         int_fld[i] = strtoul(str_fld[i], &end, 0);
1240                         if (errno != 0 || end == str_fld[i] || int_fld[i] >
1241                                                                         255)
1242                                 return -1;
1243                 }
1244                 if (nb_lcore_params >= MAX_LCORE_PARAMS) {
1245                         printf("exceeded max number of lcore params: %hu\n",
1246                                 nb_lcore_params);
1247                         return -1;
1248                 }
1249                 lcore_params_array[nb_lcore_params].port_id =
1250                                 (uint8_t)int_fld[FLD_PORT];
1251                 lcore_params_array[nb_lcore_params].queue_id =
1252                                 (uint8_t)int_fld[FLD_QUEUE];
1253                 lcore_params_array[nb_lcore_params].lcore_id =
1254                                 (uint8_t)int_fld[FLD_LCORE];
1255                 ++nb_lcore_params;
1256         }
1257         lcore_params = lcore_params_array;
1258
1259         return 0;
1260 }
1261
1262 #define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype"
1263
1264 /* Parse the argument given in the command line of the application */
1265 static int
1266 parse_args(int argc, char **argv)
1267 {
1268         int opt, ret;
1269         char **argvopt;
1270         int option_index;
1271         char *prgname = argv[0];
1272         static struct option lgopts[] = {
1273                 {"config", 1, 0, 0},
1274                 {"no-numa", 0, 0, 0},
1275                 {"enable-jumbo", 0, 0, 0},
1276                 {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, 0},
1277                 {NULL, 0, 0, 0}
1278         };
1279
1280         argvopt = argv;
1281
1282         while ((opt = getopt_long(argc, argvopt, "p:P",
1283                                 lgopts, &option_index)) != EOF) {
1284
1285                 switch (opt) {
1286                 /* portmask */
1287                 case 'p':
1288                         enabled_port_mask = parse_portmask(optarg);
1289                         if (enabled_port_mask == 0) {
1290                                 printf("invalid portmask\n");
1291                                 print_usage(prgname);
1292                                 return -1;
1293                         }
1294                         break;
1295                 case 'P':
1296                         printf("Promiscuous mode selected\n");
1297                         promiscuous_on = 1;
1298                         break;
1299
1300                 /* long options */
1301                 case 0:
1302                         if (!strncmp(lgopts[option_index].name, "config", 6)) {
1303                                 ret = parse_config(optarg);
1304                                 if (ret) {
1305                                         printf("invalid config\n");
1306                                         print_usage(prgname);
1307                                         return -1;
1308                                 }
1309                         }
1310
1311                         if (!strncmp(lgopts[option_index].name,
1312                                                 "no-numa", 7)) {
1313                                 printf("numa is disabled \n");
1314                                 numa_on = 0;
1315                         }
1316
1317                         if (!strncmp(lgopts[option_index].name,
1318                                         "enable-jumbo", 12)) {
1319                                 struct option lenopts =
1320                                         {"max-pkt-len", required_argument, \
1321                                                                         0, 0};
1322
1323                                 printf("jumbo frame is enabled \n");
1324                                 port_conf.rxmode.jumbo_frame = 1;
1325
1326                                 /**
1327                                  * if no max-pkt-len set, use the default value
1328                                  * ETHER_MAX_LEN
1329                                  */
1330                                 if (0 == getopt_long(argc, argvopt, "",
1331                                                 &lenopts, &option_index)) {
1332                                         ret = parse_max_pkt_len(optarg);
1333                                         if ((ret < 64) ||
1334                                                 (ret > MAX_JUMBO_PKT_LEN)){
1335                                                 printf("invalid packet "
1336                                                                 "length\n");
1337                                                 print_usage(prgname);
1338                                                 return -1;
1339                                         }
1340                                         port_conf.rxmode.max_rx_pkt_len = ret;
1341                                 }
1342                                 printf("set jumbo frame "
1343                                         "max packet length to %u\n",
1344                                 (unsigned int)port_conf.rxmode.max_rx_pkt_len);
1345                         }
1346
1347                         if (!strncmp(lgopts[option_index].name,
1348                                      CMD_LINE_OPT_PARSE_PTYPE,
1349                                      sizeof(CMD_LINE_OPT_PARSE_PTYPE))) {
1350                                 printf("soft parse-ptype is enabled\n");
1351                                 parse_ptype = 1;
1352                         }
1353
1354                         break;
1355
1356                 default:
1357                         print_usage(prgname);
1358                         return -1;
1359                 }
1360         }
1361
1362         if (optind >= 0)
1363                 argv[optind-1] = prgname;
1364
1365         ret = optind-1;
1366         optind = 1; /* reset getopt lib */
1367         return ret;
1368 }
1369
1370 static void
1371 print_ethaddr(const char *name, const struct ether_addr *eth_addr)
1372 {
1373         char buf[ETHER_ADDR_FMT_SIZE];
1374         ether_format_addr(buf, ETHER_ADDR_FMT_SIZE, eth_addr);
1375         printf("%s%s", name, buf);
1376 }
1377
1378 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
1379 static void
1380 setup_hash(int socketid)
1381 {
1382         struct rte_hash_parameters ipv4_l3fwd_hash_params = {
1383                 .name = NULL,
1384                 .entries = L3FWD_HASH_ENTRIES,
1385                 .key_len = sizeof(struct ipv4_5tuple),
1386                 .hash_func = DEFAULT_HASH_FUNC,
1387                 .hash_func_init_val = 0,
1388         };
1389
1390         struct rte_hash_parameters ipv6_l3fwd_hash_params = {
1391                 .name = NULL,
1392                 .entries = L3FWD_HASH_ENTRIES,
1393                 .key_len = sizeof(struct ipv6_5tuple),
1394                 .hash_func = DEFAULT_HASH_FUNC,
1395                 .hash_func_init_val = 0,
1396         };
1397
1398         unsigned i;
1399         int ret;
1400         char s[64];
1401
1402         /* create ipv4 hash */
1403         snprintf(s, sizeof(s), "ipv4_l3fwd_hash_%d", socketid);
1404         ipv4_l3fwd_hash_params.name = s;
1405         ipv4_l3fwd_hash_params.socket_id = socketid;
1406         ipv4_l3fwd_lookup_struct[socketid] =
1407                 rte_hash_create(&ipv4_l3fwd_hash_params);
1408         if (ipv4_l3fwd_lookup_struct[socketid] == NULL)
1409                 rte_exit(EXIT_FAILURE, "Unable to create the l3fwd hash on "
1410                                 "socket %d\n", socketid);
1411
1412         /* create ipv6 hash */
1413         snprintf(s, sizeof(s), "ipv6_l3fwd_hash_%d", socketid);
1414         ipv6_l3fwd_hash_params.name = s;
1415         ipv6_l3fwd_hash_params.socket_id = socketid;
1416         ipv6_l3fwd_lookup_struct[socketid] =
1417                 rte_hash_create(&ipv6_l3fwd_hash_params);
1418         if (ipv6_l3fwd_lookup_struct[socketid] == NULL)
1419                 rte_exit(EXIT_FAILURE, "Unable to create the l3fwd hash on "
1420                                 "socket %d\n", socketid);
1421
1422
1423         /* populate the ipv4 hash */
1424         for (i = 0; i < IPV4_L3FWD_NUM_ROUTES; i++) {
1425                 ret = rte_hash_add_key (ipv4_l3fwd_lookup_struct[socketid],
1426                                 (void *) &ipv4_l3fwd_route_array[i].key);
1427                 if (ret < 0) {
1428                         rte_exit(EXIT_FAILURE, "Unable to add entry %u to the"
1429                                 "l3fwd hash on socket %d\n", i, socketid);
1430                 }
1431                 ipv4_l3fwd_out_if[ret] = ipv4_l3fwd_route_array[i].if_out;
1432                 printf("Hash: Adding key\n");
1433                 print_ipv4_key(ipv4_l3fwd_route_array[i].key);
1434         }
1435
1436         /* populate the ipv6 hash */
1437         for (i = 0; i < IPV6_L3FWD_NUM_ROUTES; i++) {
1438                 ret = rte_hash_add_key (ipv6_l3fwd_lookup_struct[socketid],
1439                                 (void *) &ipv6_l3fwd_route_array[i].key);
1440                 if (ret < 0) {
1441                         rte_exit(EXIT_FAILURE, "Unable to add entry %u to the"
1442                                 "l3fwd hash on socket %d\n", i, socketid);
1443                 }
1444                 ipv6_l3fwd_out_if[ret] = ipv6_l3fwd_route_array[i].if_out;
1445                 printf("Hash: Adding key\n");
1446                 print_ipv6_key(ipv6_l3fwd_route_array[i].key);
1447         }
1448 }
1449 #endif
1450
1451 #if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
1452 static void
1453 setup_lpm(int socketid)
1454 {
1455         unsigned i;
1456         int ret;
1457         char s[64];
1458
1459         /* create the LPM table */
1460         struct rte_lpm_config lpm_ipv4_config;
1461
1462         lpm_ipv4_config.max_rules = IPV4_L3FWD_LPM_MAX_RULES;
1463         lpm_ipv4_config.number_tbl8s = 256;
1464         lpm_ipv4_config.flags = 0;
1465
1466         snprintf(s, sizeof(s), "IPV4_L3FWD_LPM_%d", socketid);
1467         ipv4_l3fwd_lookup_struct[socketid] =
1468                         rte_lpm_create(s, socketid, &lpm_ipv4_config);
1469         if (ipv4_l3fwd_lookup_struct[socketid] == NULL)
1470                 rte_exit(EXIT_FAILURE, "Unable to create the l3fwd LPM table"
1471                                 " on socket %d\n", socketid);
1472
1473         /* populate the LPM table */
1474         for (i = 0; i < IPV4_L3FWD_NUM_ROUTES; i++) {
1475                 ret = rte_lpm_add(ipv4_l3fwd_lookup_struct[socketid],
1476                         ipv4_l3fwd_route_array[i].ip,
1477                         ipv4_l3fwd_route_array[i].depth,
1478                         ipv4_l3fwd_route_array[i].if_out);
1479
1480                 if (ret < 0) {
1481                         rte_exit(EXIT_FAILURE, "Unable to add entry %u to the "
1482                                 "l3fwd LPM table on socket %d\n",
1483                                 i, socketid);
1484                 }
1485
1486                 printf("LPM: Adding route 0x%08x / %d (%d)\n",
1487                         (unsigned)ipv4_l3fwd_route_array[i].ip,
1488                         ipv4_l3fwd_route_array[i].depth,
1489                         ipv4_l3fwd_route_array[i].if_out);
1490         }
1491 }
1492 #endif
1493
1494 static int
1495 init_mem(unsigned nb_mbuf)
1496 {
1497         struct lcore_conf *qconf;
1498         int socketid;
1499         unsigned lcore_id;
1500         char s[64];
1501
1502         for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
1503                 if (rte_lcore_is_enabled(lcore_id) == 0)
1504                         continue;
1505
1506                 if (numa_on)
1507                         socketid = rte_lcore_to_socket_id(lcore_id);
1508                 else
1509                         socketid = 0;
1510
1511                 if (socketid >= NB_SOCKETS) {
1512                         rte_exit(EXIT_FAILURE, "Socket %d of lcore %u is "
1513                                         "out of range %d\n", socketid,
1514                                                 lcore_id, NB_SOCKETS);
1515                 }
1516                 if (pktmbuf_pool[socketid] == NULL) {
1517                         snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
1518                         pktmbuf_pool[socketid] =
1519                                 rte_pktmbuf_pool_create(s, nb_mbuf,
1520                                         MEMPOOL_CACHE_SIZE, 0,
1521                                         RTE_MBUF_DEFAULT_BUF_SIZE,
1522                                         socketid);
1523                         if (pktmbuf_pool[socketid] == NULL)
1524                                 rte_exit(EXIT_FAILURE,
1525                                         "Cannot init mbuf pool on socket %d\n",
1526                                                                 socketid);
1527                         else
1528                                 printf("Allocated mbuf pool on socket %d\n",
1529                                                                 socketid);
1530
1531 #if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
1532                         setup_lpm(socketid);
1533 #else
1534                         setup_hash(socketid);
1535 #endif
1536                 }
1537                 qconf = &lcore_conf[lcore_id];
1538                 qconf->ipv4_lookup_struct = ipv4_l3fwd_lookup_struct[socketid];
1539 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
1540                 qconf->ipv6_lookup_struct = ipv6_l3fwd_lookup_struct[socketid];
1541 #endif
1542         }
1543         return 0;
1544 }
1545
1546 /* Check the link status of all ports in up to 9s, and print them finally */
1547 static void
1548 check_all_ports_link_status(uint16_t port_num, uint32_t port_mask)
1549 {
1550 #define CHECK_INTERVAL 100 /* 100ms */
1551 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
1552         uint8_t count, all_ports_up, print_flag = 0;
1553         uint16_t portid;
1554         struct rte_eth_link link;
1555
1556         printf("\nChecking link status");
1557         fflush(stdout);
1558         for (count = 0; count <= MAX_CHECK_TIME; count++) {
1559                 all_ports_up = 1;
1560                 for (portid = 0; portid < port_num; portid++) {
1561                         if ((port_mask & (1 << portid)) == 0)
1562                                 continue;
1563                         memset(&link, 0, sizeof(link));
1564                         rte_eth_link_get_nowait(portid, &link);
1565                         /* print link status if flag set */
1566                         if (print_flag == 1) {
1567                                 if (link.link_status)
1568                                         printf("Port %d Link Up - speed %u "
1569                                                 "Mbps - %s\n", (uint8_t)portid,
1570                                                 (unsigned)link.link_speed,
1571                                 (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
1572                                         ("full-duplex") : ("half-duplex\n"));
1573                                 else
1574                                         printf("Port %d Link Down\n",
1575                                                 (uint8_t)portid);
1576                                 continue;
1577                         }
1578                         /* clear all_ports_up flag if any link down */
1579                         if (link.link_status == ETH_LINK_DOWN) {
1580                                 all_ports_up = 0;
1581                                 break;
1582                         }
1583                 }
1584                 /* after finally printing all link status, get out */
1585                 if (print_flag == 1)
1586                         break;
1587
1588                 if (all_ports_up == 0) {
1589                         printf(".");
1590                         fflush(stdout);
1591                         rte_delay_ms(CHECK_INTERVAL);
1592                 }
1593
1594                 /* set the print_flag if all ports up or timeout */
1595                 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
1596                         print_flag = 1;
1597                         printf("done\n");
1598                 }
1599         }
1600 }
1601
1602 static int check_ptype(uint8_t portid)
1603 {
1604         int i, ret;
1605         int ptype_l3_ipv4 = 0;
1606 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
1607         int ptype_l3_ipv6 = 0;
1608 #endif
1609         uint32_t ptype_mask = RTE_PTYPE_L3_MASK;
1610
1611         ret = rte_eth_dev_get_supported_ptypes(portid, ptype_mask, NULL, 0);
1612         if (ret <= 0)
1613                 return 0;
1614
1615         uint32_t ptypes[ret];
1616
1617         ret = rte_eth_dev_get_supported_ptypes(portid, ptype_mask, ptypes, ret);
1618         for (i = 0; i < ret; ++i) {
1619                 if (ptypes[i] & RTE_PTYPE_L3_IPV4)
1620                         ptype_l3_ipv4 = 1;
1621 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
1622                 if (ptypes[i] & RTE_PTYPE_L3_IPV6)
1623                         ptype_l3_ipv6 = 1;
1624 #endif
1625         }
1626
1627         if (ptype_l3_ipv4 == 0)
1628                 printf("port %d cannot parse RTE_PTYPE_L3_IPV4\n", portid);
1629
1630 #if (APP_LOOKUP_METHOD == APP_LOOKUP_EXACT_MATCH)
1631         if (ptype_l3_ipv6 == 0)
1632                 printf("port %d cannot parse RTE_PTYPE_L3_IPV6\n", portid);
1633 #endif
1634
1635 #if (APP_LOOKUP_METHOD == APP_LOOKUP_LPM)
1636         if (ptype_l3_ipv4)
1637 #else /* APP_LOOKUP_EXACT_MATCH */
1638         if (ptype_l3_ipv4 && ptype_l3_ipv6)
1639 #endif
1640                 return 1;
1641
1642         return 0;
1643
1644 }
1645
1646 int
1647 main(int argc, char **argv)
1648 {
1649         struct lcore_conf *qconf;
1650         struct rte_eth_dev_info dev_info;
1651         struct rte_eth_txconf *txconf;
1652         int ret;
1653         unsigned nb_ports;
1654         uint16_t queueid;
1655         unsigned lcore_id;
1656         uint64_t hz;
1657         uint32_t n_tx_queue, nb_lcores;
1658         uint32_t dev_rxq_num, dev_txq_num;
1659         uint8_t nb_rx_queue, queue, socketid;
1660         uint16_t portid;
1661         uint16_t org_rxq_intr = port_conf.intr_conf.rxq;
1662
1663         /* catch SIGINT and restore cpufreq governor to ondemand */
1664         signal(SIGINT, signal_exit_now);
1665
1666         /* init EAL */
1667         ret = rte_eal_init(argc, argv);
1668         if (ret < 0)
1669                 rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
1670         argc -= ret;
1671         argv += ret;
1672
1673         /* init RTE timer library to be used late */
1674         rte_timer_subsystem_init();
1675
1676         /* parse application arguments (after the EAL ones) */
1677         ret = parse_args(argc, argv);
1678         if (ret < 0)
1679                 rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
1680
1681         if (check_lcore_params() < 0)
1682                 rte_exit(EXIT_FAILURE, "check_lcore_params failed\n");
1683
1684         ret = init_lcore_rx_queues();
1685         if (ret < 0)
1686                 rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n");
1687
1688         nb_ports = rte_eth_dev_count();
1689
1690         if (check_port_config(nb_ports) < 0)
1691                 rte_exit(EXIT_FAILURE, "check_port_config failed\n");
1692
1693         nb_lcores = rte_lcore_count();
1694
1695         /* initialize all ports */
1696         for (portid = 0; portid < nb_ports; portid++) {
1697                 /* skip ports that are not enabled */
1698                 if ((enabled_port_mask & (1 << portid)) == 0) {
1699                         printf("\nSkipping disabled port %d\n", portid);
1700                         continue;
1701                 }
1702
1703                 /* init port */
1704                 printf("Initializing port %d ... ", portid );
1705                 fflush(stdout);
1706
1707                 rte_eth_dev_info_get(portid, &dev_info);
1708                 dev_rxq_num = dev_info.max_rx_queues;
1709                 dev_txq_num = dev_info.max_tx_queues;
1710
1711                 nb_rx_queue = get_port_n_rx_queues(portid);
1712                 if (nb_rx_queue > dev_rxq_num)
1713                         rte_exit(EXIT_FAILURE,
1714                                 "Cannot configure not existed rxq: "
1715                                 "port=%d\n", portid);
1716
1717                 n_tx_queue = nb_lcores;
1718                 if (n_tx_queue > dev_txq_num)
1719                         n_tx_queue = dev_txq_num;
1720                 printf("Creating queues: nb_rxq=%d nb_txq=%u... ",
1721                         nb_rx_queue, (unsigned)n_tx_queue );
1722                 /* If number of Rx queue is 0, no need to enable Rx interrupt */
1723                 if (nb_rx_queue == 0)
1724                         port_conf.intr_conf.rxq = 0;
1725                 ret = rte_eth_dev_configure(portid, nb_rx_queue,
1726                                         (uint16_t)n_tx_queue, &port_conf);
1727                 /* Revert to original value */
1728                 port_conf.intr_conf.rxq = org_rxq_intr;
1729                 if (ret < 0)
1730                         rte_exit(EXIT_FAILURE, "Cannot configure device: "
1731                                         "err=%d, port=%d\n", ret, portid);
1732
1733                 ret = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd,
1734                                                        &nb_txd);
1735                 if (ret < 0)
1736                         rte_exit(EXIT_FAILURE,
1737                                  "Cannot adjust number of descriptors: err=%d, port=%d\n",
1738                                  ret, portid);
1739
1740                 rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
1741                 print_ethaddr(" Address:", &ports_eth_addr[portid]);
1742                 printf(", ");
1743
1744                 /* init memory */
1745                 ret = init_mem(NB_MBUF);
1746                 if (ret < 0)
1747                         rte_exit(EXIT_FAILURE, "init_mem failed\n");
1748
1749                 for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
1750                         if (rte_lcore_is_enabled(lcore_id) == 0)
1751                                 continue;
1752
1753                         /* Initialize TX buffers */
1754                         qconf = &lcore_conf[lcore_id];
1755                         qconf->tx_buffer[portid] = rte_zmalloc_socket("tx_buffer",
1756                                 RTE_ETH_TX_BUFFER_SIZE(MAX_PKT_BURST), 0,
1757                                 rte_eth_dev_socket_id(portid));
1758                         if (qconf->tx_buffer[portid] == NULL)
1759                                 rte_exit(EXIT_FAILURE, "Can't allocate tx buffer for port %u\n",
1760                                                  portid);
1761
1762                         rte_eth_tx_buffer_init(qconf->tx_buffer[portid], MAX_PKT_BURST);
1763                 }
1764
1765                 /* init one TX queue per couple (lcore,port) */
1766                 queueid = 0;
1767                 for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
1768                         if (rte_lcore_is_enabled(lcore_id) == 0)
1769                                 continue;
1770
1771                         if (queueid >= dev_txq_num)
1772                                 continue;
1773
1774                         if (numa_on)
1775                                 socketid = \
1776                                 (uint8_t)rte_lcore_to_socket_id(lcore_id);
1777                         else
1778                                 socketid = 0;
1779
1780                         printf("txq=%u,%d,%d ", lcore_id, queueid, socketid);
1781                         fflush(stdout);
1782
1783                         rte_eth_dev_info_get(portid, &dev_info);
1784                         txconf = &dev_info.default_txconf;
1785                         if (port_conf.rxmode.jumbo_frame)
1786                                 txconf->txq_flags = 0;
1787                         ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
1788                                                      socketid, txconf);
1789                         if (ret < 0)
1790                                 rte_exit(EXIT_FAILURE,
1791                                         "rte_eth_tx_queue_setup: err=%d, "
1792                                                 "port=%d\n", ret, portid);
1793
1794                         qconf = &lcore_conf[lcore_id];
1795                         qconf->tx_queue_id[portid] = queueid;
1796                         queueid++;
1797
1798                         qconf->tx_port_id[qconf->n_tx_port] = portid;
1799                         qconf->n_tx_port++;
1800                 }
1801                 printf("\n");
1802         }
1803
1804         for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
1805                 if (rte_lcore_is_enabled(lcore_id) == 0)
1806                         continue;
1807
1808                 /* init power management library */
1809                 ret = rte_power_init(lcore_id);
1810                 if (ret)
1811                         RTE_LOG(ERR, POWER,
1812                                 "Library initialization failed on core %u\n", lcore_id);
1813
1814                 /* init timer structures for each enabled lcore */
1815                 rte_timer_init(&power_timers[lcore_id]);
1816                 hz = rte_get_timer_hz();
1817                 rte_timer_reset(&power_timers[lcore_id],
1818                         hz/TIMER_NUMBER_PER_SECOND, SINGLE, lcore_id,
1819                                                 power_timer_cb, NULL);
1820
1821                 qconf = &lcore_conf[lcore_id];
1822                 printf("\nInitializing rx queues on lcore %u ... ", lcore_id );
1823                 fflush(stdout);
1824                 /* init RX queues */
1825                 for(queue = 0; queue < qconf->n_rx_queue; ++queue) {
1826                         portid = qconf->rx_queue_list[queue].port_id;
1827                         queueid = qconf->rx_queue_list[queue].queue_id;
1828
1829                         if (numa_on)
1830                                 socketid = \
1831                                 (uint8_t)rte_lcore_to_socket_id(lcore_id);
1832                         else
1833                                 socketid = 0;
1834
1835                         printf("rxq=%d,%d,%d ", portid, queueid, socketid);
1836                         fflush(stdout);
1837
1838                         ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
1839                                 socketid, NULL,
1840                                 pktmbuf_pool[socketid]);
1841                         if (ret < 0)
1842                                 rte_exit(EXIT_FAILURE,
1843                                         "rte_eth_rx_queue_setup: err=%d, "
1844                                                 "port=%d\n", ret, portid);
1845
1846                         if (parse_ptype) {
1847                                 if (add_cb_parse_ptype(portid, queueid) < 0)
1848                                         rte_exit(EXIT_FAILURE,
1849                                                  "Fail to add ptype cb\n");
1850                         } else if (!check_ptype(portid))
1851                                 rte_exit(EXIT_FAILURE,
1852                                          "PMD can not provide needed ptypes\n");
1853                 }
1854         }
1855
1856         printf("\n");
1857
1858         /* start ports */
1859         for (portid = 0; portid < nb_ports; portid++) {
1860                 if ((enabled_port_mask & (1 << portid)) == 0) {
1861                         continue;
1862                 }
1863                 /* Start device */
1864                 ret = rte_eth_dev_start(portid);
1865                 if (ret < 0)
1866                         rte_exit(EXIT_FAILURE, "rte_eth_dev_start: err=%d, "
1867                                                 "port=%d\n", ret, portid);
1868                 /*
1869                  * If enabled, put device in promiscuous mode.
1870                  * This allows IO forwarding mode to forward packets
1871                  * to itself through 2 cross-connected  ports of the
1872                  * target machine.
1873                  */
1874                 if (promiscuous_on)
1875                         rte_eth_promiscuous_enable(portid);
1876                 /* initialize spinlock for each port */
1877                 rte_spinlock_init(&(locks[portid]));
1878         }
1879
1880         check_all_ports_link_status((uint8_t)nb_ports, enabled_port_mask);
1881
1882         /* launch per-lcore init on every lcore */
1883         rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
1884         RTE_LCORE_FOREACH_SLAVE(lcore_id) {
1885                 if (rte_eal_wait_lcore(lcore_id) < 0)
1886                         return -1;
1887         }
1888
1889         return 0;
1890 }