txq->elts_head = 0;
txq->elts_tail = 0;
txq->elts_comp = 0;
- /* Request send completion every MLX4_PMD_TX_PER_COMP_REQ packets or
- * at least 4 times per ring. */
+ /*
+ * Request send completion every MLX4_PMD_TX_PER_COMP_REQ packets or
+ * at least 4 times per ring.
+ */
txq->elts_comp_cd_init =
((MLX4_PMD_TX_PER_COMP_REQ < (elts_n / 4)) ?
MLX4_PMD_TX_PER_COMP_REQ : (elts_n / 4));
return 0;
error:
rte_free(elts);
-
DEBUG("%p: failed, freed everything", (void *)txq);
assert(ret > 0);
rte_errno = ret;
rte_free(elts);
}
-
/**
* Clean up a TX queue.
*
(void)mp;
(void)mem_idx;
-
/* It already failed, skip the next chunks. */
if (data->ret != 0)
return;
rte_mempool_mem_iter(mp, mlx4_check_mempool_cb, &data);
*start = (uintptr_t)data.start;
*end = (uintptr_t)data.end;
-
return data.ret;
}
(void *)mp);
return NULL;
}
-
DEBUG("mempool %p area start=%p end=%p size=%zu",
(void *)mp, (void *)start, (void *)end,
(size_t)(end - start));
struct txq_mp2mr_mbuf_check_data *data = arg;
struct rte_mbuf *buf = obj;
- /* Check whether mbuf structure fits element size and whether mempool
- * pointer is valid. */
+ /*
+ * Check whether mbuf structure fits element size and whether mempool
+ * pointer is valid.
+ */
if (sizeof(*buf) > mp->elt_size || buf->pool != mp)
data->ret = -1;
}
.max_inline_data = MLX4_PMD_MAX_INLINE,
},
.qp_type = IBV_QPT_RAW_PACKET,
- /* Do *NOT* enable this, completions events are managed per
- * TX burst. */
+ /*
+ * Do *NOT* enable this, completions events are managed per
+ * Tx burst.
+ */
.sq_sig_all = 0,
};
tmpl.qp = ibv_create_qp(priv->pd, &attr.init);
++rxq->priv->dev->data->rx_mbuf_alloc_failed;
goto repost;
}
-
/* Reconfigure sge to use rep instead of seg. */
elt->sge.addr = (uintptr_t)rep->buf_addr + RTE_PKTMBUF_HEADROOM;
assert(elt->sge.lkey == rxq->mr->lkey);
elt->buf = rep;
-
/* Update seg information. */
SET_DATA_OFF(seg, RTE_PKTMBUF_HEADROOM);
NB_SEGS(seg) = 1;
DATA_LEN(seg) = len;
seg->packet_type = 0;
seg->ol_flags = 0;
-
/* Return packet. */
*(pkts++) = seg;
++pkts_ret;
(void *)dev,
((priv->ctx != NULL) ? priv->ctx->device->name : ""));
priv_mac_addr_del(priv);
- /* Prevent crashes when queues are still in use. This is unfortunately
+ /*
+ * Prevent crashes when queues are still in use. This is unfortunately
* still required for DPDK 1.3 because some programs (such as testpmd)
- * never release them before closing the device. */
+ * never release them before closing the device.
+ */
dev->rx_pkt_burst = removed_rx_burst;
dev->tx_pkt_burst = removed_tx_burst;
if (priv->rxqs != NULL) {
priv_unlock(priv);
return err;
}
+
/**
* DPDK callback to get information about the device.
*
char ifname[IF_NAMESIZE];
info->pci_dev = RTE_ETH_DEV_TO_PCI(dev);
-
if (priv == NULL)
return;
priv_lock(priv);
int link_speed = 0;
/* priv_lock() is not taken to allow concurrent calls. */
-
if (priv == NULL) {
rte_errno = EINVAL;
return -rte_errno;
strerror(rte_errno));
goto out;
}
-
fc_conf->autoneg = ethpause.autoneg;
if (ethpause.rx_pause && ethpause.tx_pause)
fc_conf->mode = RTE_FC_FULL;
else
fc_conf->mode = RTE_FC_NONE;
ret = 0;
-
out:
priv_unlock(priv);
assert(ret >= 0);
ethpause.rx_pause = 1;
else
ethpause.rx_pause = 0;
-
if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
(fc_conf->mode & RTE_FC_TX_PAUSE))
ethpause.tx_pause = 1;
else
ethpause.tx_pause = 0;
-
priv_lock(priv);
if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
ret = rte_errno;
goto out;
}
ret = 0;
-
out:
priv_unlock(priv);
assert(ret >= 0);
ret = priv_dev_status_handler(priv, dev, &events);
priv_unlock(priv);
if (ret > 0 && events & (1 << RTE_ETH_EVENT_INTR_LSC))
- _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC, NULL,
- NULL);
+ _rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC,
+ NULL, NULL);
}
/**
* Pointer to private structure.
* @param dev
* Pointer to the rte_eth_dev structure.
+ *
* @return
* 0 on success, negative errno value otherwise and rte_errno is set.
*/
* Pointer to private structure.
* @param dev
* Pointer to the rte_eth_dev structure.
+ *
* @return
* 0 on success, negative errno value otherwise and rte_errno is set.
*/
int flags;
int rc;
- /* Check whether the interrupt handler has already been installed
- * for either type of interrupt
+ /*
+ * Check whether the interrupt handler has already been installed
+ * for either type of interrupt.
*/
if (priv->intr_conf.lsc &&
priv->intr_conf.rmv &&
* Pointer to private structure.
* @param dev
* Pointer to the rte_eth_dev structure.
+ *
* @return
* 0 on success, negative errno value otherwise and rte_errno is set.
*/
* Pointer to private structure.
* @param dev
* Pointer to the rte_eth_dev structure.
+ *
* @return
* 0 on success, negative errno value otherwise and rte_errno is set.
*/
* Pointer to private structure.
* @param dev
* Pointer to the rte_eth_dev structure.
+ *
* @return
* 0 on success, negative errno value otherwise and rte_errno is set.
*/
* Pointer to private structure.
* @param dev
* Pointer to the rte_eth_dev structure.
+ *
* @return
* 0 on success, negative errno value otherwise and rte_errno is set.
*/
(void)pci_drv;
assert(pci_drv == &mlx4_driver);
-
list = ibv_get_device_list(&i);
if (list == NULL) {
rte_errno = errno;
return -rte_errno;
}
ibv_dev = list[i];
-
DEBUG("device opened");
if (ibv_query_device(attr_ctx, &device_attr)) {
rte_errno = ENODEV;
goto error;
}
INFO("%u port(s) detected", device_attr.phys_port_cnt);
-
conf.ports.present |= (UINT64_C(1) << device_attr.phys_port_cnt) - 1;
if (mlx4_args(pci_dev->device.devargs, &conf)) {
ERROR("failed to process device arguments");
/* If port is not enabled, skip. */
if (!(conf.ports.enabled & (1 << i)))
continue;
-
DEBUG("using port %u", port);
-
ctx = ibv_open_device(ibv_dev);
if (ctx == NULL) {
rte_errno = ENODEV;
goto port_error;
}
-
/* Check port status. */
err = ibv_query_port(ctx, port, &port_attr);
if (err) {
ERROR("port query failed: %s", strerror(rte_errno));
goto port_error;
}
-
if (port_attr.link_layer != IBV_LINK_LAYER_ETHERNET) {
rte_errno = ENOTSUP;
ERROR("port %d is not configured in Ethernet mode",
port);
goto port_error;
}
-
if (port_attr.state != IBV_PORT_ACTIVE)
DEBUG("port %d is not active: \"%s\" (%d)",
port, ibv_port_state_str(port_attr.state),
port_attr.state);
-
/* Allocate protection domain. */
pd = ibv_alloc_pd(ctx);
if (pd == NULL) {
ERROR("PD allocation failure");
goto port_error;
}
-
/* from rte_ethdev.c */
priv = rte_zmalloc("ethdev private structure",
sizeof(*priv),
ERROR("priv allocation failure");
goto port_error;
}
-
priv->ctx = ctx;
priv->device_attr = device_attr;
priv->port = port;
priv->pd = pd;
priv->mtu = ETHER_MTU;
-
priv->vf = vf;
/* Configure the first MAC address by default. */
if (priv_get_mac(priv, &mac.addr_bytes)) {
/* Get actual MTU if possible. */
priv_get_mtu(priv, &priv->mtu);
DEBUG("port %u MTU is %u", priv->port, priv->mtu);
-
/* from rte_ethdev.c */
{
char name[RTE_ETH_NAME_MAX_LEN];
rte_errno = ENOMEM;
goto port_error;
}
-
eth_dev->data->dev_private = priv;
eth_dev->data->mac_addrs = &priv->mac;
eth_dev->device = &pci_dev->device;
-
rte_eth_copy_pci_info(eth_dev, pci_dev);
-
eth_dev->device->driver = &mlx4_driver.driver;
-
/*
* Copy and override interrupt handle to prevent it from
* being shared between all ethdev instances of a given PCI
*/
priv->intr_handle_dev = *eth_dev->intr_handle;
eth_dev->intr_handle = &priv->intr_handle_dev;
-
priv->dev = eth_dev;
eth_dev->dev_ops = &mlx4_dev_ops;
eth_dev->data->dev_flags |= RTE_ETH_DEV_DETACHABLE;
-
/* Bring Ethernet device up. */
DEBUG("forcing Ethernet interface up");
priv_set_flags(priv, ~IFF_UP, IFF_UP);
if (eth_dev->data->dev_flags & RTE_ETH_DEV_INTR_LSC)
mlx4_link_update(eth_dev, 0);
continue;
-
port_error:
rte_free(priv);
if (pd)
}
if (i == device_attr.phys_port_cnt)
return 0;
-
/*
* XXX if something went wrong in the loop above, there is a resource
* leak (ctx, pd, priv, dpdk ethdev) but we can do nothing about it as
* long as the dpdk does not provide a way to deallocate a ethdev and a
* way to enumerate the registered ethdevs to free the previous ones.
*/
-
error:
if (attr_ctx)
claim_zero(ibv_close_device(attr_ctx));
git.droids-corp.org / dpdk.git / commitdiff