net/mlx4: fix Rx interrupts management
authorAdrien Mazarguil <adrien.mazarguil@6wind.com>
Wed, 14 Jun 2017 11:49:13 +0000 (13:49 +0200)
committerFerruh Yigit <ferruh.yigit@intel.com>
Thu, 6 Jul 2017 13:00:56 +0000 (15:00 +0200)
This commit addresses various issues that may lead to undefined behavior
when configuring Rx interrupts.

While failure to create a Rx queue completion channel in rxq_setup()
prevents that queue from being created, existing queues still have theirs.
Since the error handler disables dev_conf.intr_conf.rxq as well, subsequent
calls to rxq_setup() create Rx queues without interrupts. This leads to a
scenario where not all Rx queues support interrupts; missing checks on the
presence of completion channels may crash the application.

Considering that the PMD is not supposed to disable user-provided
configuration parameters (dev_conf.intr_conf.rxq), and that these can
change for subsequent rxq_setup() calls anyway, properly supporting a mixed
mode where not all Rx queues have interrupts enabled is a better approach.

To do so with a minimum set of changes, priv_intr_efd_enable() and
priv_create_intr_vec() are first refactored as a single
priv_rx_intr_vec_enable() function (same for their "disable" counterparts).
Since they had to be used together, there was no point in keeping them
separate.

Remaining changes:

- Always clean up before reconfiguring interrupts to avoid memory leaks.
- Always clean up when closing the device.
- Use malloc()/free() instead of their rte_*() counterparts since there is
  no need to store the vector in huge pages-backed memory.
- Allow more Rx queues than the size of the event file descriptor array as
  long as Rx interrupts are not requested on all of them.
- Properly clean up interrupt handle when disabling Rx interrupts (nb_efd
  and intr_vec reset to 0).
- Check completion channel presence while toggling Rx interrupts on a given
  queue.

Fixes: 9f05a4b81809 ("net/mlx4: support user space Rx interrupt event")

Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Moti Haimovsky <motih@mellanox.com>
drivers/net/mlx4/mlx4.c

index b20cecc..ae4be9e 100644 (file)
@@ -135,16 +135,10 @@ static int
 mlx4_rx_intr_disable(struct rte_eth_dev *dev, uint16_t idx);
 
 static int
-priv_intr_efd_enable(struct priv *priv);
+priv_rx_intr_vec_enable(struct priv *priv);
 
 static void
-priv_intr_efd_disable(struct priv *priv);
-
-static int
-priv_create_intr_vec(struct priv *priv);
-
-static void
-priv_destroy_intr_vec(struct priv *priv);
+priv_rx_intr_vec_disable(struct priv *priv);
 
 /**
  * Check if running as a secondary process.
@@ -3720,9 +3714,9 @@ skip_mr:
        if (dev->data->dev_conf.intr_conf.rxq) {
                tmpl.channel = ibv_create_comp_channel(priv->ctx);
                if (tmpl.channel == NULL) {
-                       dev->data->dev_conf.intr_conf.rxq = 0;
                        ret = ENOMEM;
-                       ERROR("%p: Comp Channel creation failure: %s",
+                       ERROR("%p: Rx interrupt completion channel creation"
+                             " failure: %s",
                              (void *)dev, strerror(ret));
                        goto error;
                }
@@ -4037,10 +4031,11 @@ mlx4_dev_start(struct rte_eth_dev *dev)
                     (void *)dev);
                goto err;
        }
-       if (dev->data->dev_conf.intr_conf.rxq) {
-               ret = priv_intr_efd_enable(priv);
-               if (!ret)
-                       ret = priv_create_intr_vec(priv);
+       ret = priv_rx_intr_vec_enable(priv);
+       if (ret) {
+               ERROR("%p: Rx interrupt vector creation failed",
+                     (void *)dev);
+               goto err;
        }
        ret = mlx4_priv_flow_start(priv);
        if (ret) {
@@ -4234,10 +4229,7 @@ mlx4_dev_close(struct rte_eth_dev *dev)
                assert(priv->ctx == NULL);
        priv_dev_removal_interrupt_handler_uninstall(priv, dev);
        priv_dev_link_interrupt_handler_uninstall(priv, dev);
-       if (priv->dev->data->dev_conf.intr_conf.rxq) {
-               priv_destroy_intr_vec(priv);
-               priv_intr_efd_disable(priv);
-       }
+       priv_rx_intr_vec_disable(priv);
        priv_unlock(priv);
        memset(priv, 0, sizeof(*priv));
 }
@@ -5637,7 +5629,7 @@ priv_dev_removal_interrupt_handler_install(struct priv *priv,
 }
 
 /**
- * Fill epoll fd list for rxq interrupts.
+ * Allocate queue vector and fill epoll fd list for Rx interrupts.
  *
  * @param priv
  *   Pointer to private structure.
@@ -5646,108 +5638,89 @@ priv_dev_removal_interrupt_handler_install(struct priv *priv,
  *   0 on success, negative on failure.
  */
 static int
-priv_intr_efd_enable(struct priv *priv)
+priv_rx_intr_vec_enable(struct priv *priv)
 {
        unsigned int i;
        unsigned int rxqs_n = priv->rxqs_n;
        unsigned int n = RTE_MIN(rxqs_n, (uint32_t)RTE_MAX_RXTX_INTR_VEC_ID);
+       unsigned int count = 0;
        struct rte_intr_handle *intr_handle = priv->dev->intr_handle;
 
-       if (n == 0)
+       if (!priv->dev->data->dev_conf.intr_conf.rxq)
                return 0;
-       if (n < rxqs_n) {
-               WARN("rxqs num is larger than EAL max interrupt vector "
-                    "%u > %u unable to supprt rxq interrupts",
-                    rxqs_n, (uint32_t)RTE_MAX_RXTX_INTR_VEC_ID);
-               return -EINVAL;
+       priv_rx_intr_vec_disable(priv);
+       intr_handle->intr_vec = malloc(sizeof(intr_handle->intr_vec[rxqs_n]));
+       if (intr_handle->intr_vec == NULL) {
+               ERROR("failed to allocate memory for interrupt vector,"
+                     " Rx interrupts will not be supported");
+               return -ENOMEM;
        }
        intr_handle->type = RTE_INTR_HANDLE_EXT;
        for (i = 0; i != n; ++i) {
                struct rxq *rxq = (*priv->rxqs)[i];
-               int fd = rxq->channel->fd;
+               int fd;
                int flags;
                int rc;
 
+               /* Skip queues that cannot request interrupts. */
+               if (!rxq || !rxq->channel) {
+                       /* Use invalid intr_vec[] index to disable entry. */
+                       intr_handle->intr_vec[i] =
+                               RTE_INTR_VEC_RXTX_OFFSET +
+                               RTE_MAX_RXTX_INTR_VEC_ID;
+                       continue;
+               }
+               if (count >= RTE_MAX_RXTX_INTR_VEC_ID) {
+                       ERROR("too many Rx queues for interrupt vector size"
+                             " (%d), Rx interrupts cannot be enabled",
+                             RTE_MAX_RXTX_INTR_VEC_ID);
+                       priv_rx_intr_vec_disable(priv);
+                       return -1;
+               }
+               fd = rxq->channel->fd;
                flags = fcntl(fd, F_GETFL);
                rc = fcntl(fd, F_SETFL, flags | O_NONBLOCK);
                if (rc < 0) {
-                       WARN("failed to change rxq interrupt file "
-                            "descriptor %d for queue index %d", fd, i);
+                       ERROR("failed to make Rx interrupt file descriptor"
+                             " %d non-blocking for queue index %d", fd, i);
+                       priv_rx_intr_vec_disable(priv);
                        return rc;
                }
-               intr_handle->efds[i] = fd;
+               intr_handle->intr_vec[i] = RTE_INTR_VEC_RXTX_OFFSET + count;
+               intr_handle->efds[count] = fd;
+               count++;
        }
-       intr_handle->nb_efd = n;
+       if (!count)
+               priv_rx_intr_vec_disable(priv);
+       else
+               intr_handle->nb_efd = count;
        return 0;
 }
 
 /**
- * Clean epoll fd list for rxq interrupts.
+ * Clean up Rx interrupts handler.
  *
  * @param priv
  *   Pointer to private structure.
  */
 static void
-priv_intr_efd_disable(struct priv *priv)
+priv_rx_intr_vec_disable(struct priv *priv)
 {
        struct rte_intr_handle *intr_handle = priv->dev->intr_handle;
 
        rte_intr_free_epoll_fd(intr_handle);
+       free(intr_handle->intr_vec);
+       intr_handle->nb_efd = 0;
+       intr_handle->intr_vec = NULL;
 }
 
 /**
- * Create and init interrupt vector array.
- *
- * @param priv
- *   Pointer to private structure.
- *
- * @return
- *   0 on success, negative on failure.
- */
-static int
-priv_create_intr_vec(struct priv *priv)
-{
-       unsigned int rxqs_n = priv->rxqs_n;
-       unsigned int i;
-       struct rte_intr_handle *intr_handle = priv->dev->intr_handle;
-
-       if (rxqs_n == 0)
-               return 0;
-       intr_handle->intr_vec = (int *)
-               rte_malloc("intr_vec", rxqs_n * sizeof(int), 0);
-       if (intr_handle->intr_vec == NULL) {
-               WARN("Failed to allocate memory for intr_vec "
-                    "rxq interrupt will not be supported");
-               return -ENOMEM;
-       }
-       for (i = 0; i != rxqs_n; ++i) {
-               /* 1:1 mapping between rxq and interrupt. */
-               intr_handle->intr_vec[i] = RTE_INTR_VEC_RXTX_OFFSET + i;
-       }
-       return 0;
-}
-
-/**
- * Destroy init interrupt vector array.
- *
- * @param priv
- *   Pointer to private structure.
- */
-static void
-priv_destroy_intr_vec(struct priv *priv)
-{
-       struct rte_intr_handle *intr_handle = priv->dev->intr_handle;
-
-       rte_free(intr_handle->intr_vec);
-}
-
-/**
- * DPDK callback for rx queue interrupt enable.
+ * DPDK callback for Rx queue interrupt enable.
  *
  * @param dev
  *   Pointer to Ethernet device structure.
  * @param idx
- *   RX queue index.
+ *   Rx queue index.
  *
  * @return
  *   0 on success, negative on failure.
@@ -5757,22 +5730,24 @@ mlx4_rx_intr_enable(struct rte_eth_dev *dev, uint16_t idx)
 {
        struct priv *priv = dev->data->dev_private;
        struct rxq *rxq = (*priv->rxqs)[idx];
-       struct ibv_cq *cq = rxq->cq;
-       int ret = 0;
+       int ret;
 
-       ret = ibv_req_notify_cq(cq, 0);
+       if (!rxq || !rxq->channel)
+               ret = EINVAL;
+       else
+               ret = ibv_req_notify_cq(rxq->cq, 0);
        if (ret)
                WARN("unable to arm interrupt on rx queue %d", idx);
        return -ret;
 }
 
 /**
- * DPDK callback for rx queue interrupt disable.
+ * DPDK callback for Rx queue interrupt disable.
  *
  * @param dev
  *   Pointer to Ethernet device structure.
  * @param idx
- *   RX queue index.
+ *   Rx queue index.
  *
  * @return
  *   0 on success, negative on failure.
@@ -5782,20 +5757,23 @@ mlx4_rx_intr_disable(struct rte_eth_dev *dev, uint16_t idx)
 {
        struct priv *priv = dev->data->dev_private;
        struct rxq *rxq = (*priv->rxqs)[idx];
-       struct ibv_cq *cq = rxq->cq;
        struct ibv_cq *ev_cq;
        void *ev_ctx;
-       int ret = 0;
+       int ret;
 
-       ret = ibv_get_cq_event(cq->channel, &ev_cq, &ev_ctx);
-       if (ret || ev_cq != cq)
-               ret = -1;
-       else
-               ibv_ack_cq_events(cq, 1);
+       if (!rxq || !rxq->channel) {
+               ret = EINVAL;
+       } else {
+               ret = ibv_get_cq_event(rxq->cq->channel, &ev_cq, &ev_ctx);
+               if (ret || ev_cq != rxq->cq)
+                       ret = EINVAL;
+       }
        if (ret)
                WARN("unable to disable interrupt on rx queue %d",
                     idx);
-       return ret;
+       else
+               ibv_ack_cq_events(rxq->cq, 1);
+       return -ret;
 }
 
 /**