dpdk.git
7 years agocrypto/qat: fix capabilities for D15xx device
Arek Kusztal [Mon, 10 Apr 2017 13:20:08 +0000 (14:20 +0100)]
crypto/qat: fix capabilities for D15xx device

This commit fixes capabilities for Intel(R) QuickAssist
Technology D15xx device

Fixes: 259310f3a984 ("crypto/qat: support device D15xx")

Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
7 years agoigb_uio: switch to new irq function for MSI-X
Nicolas Dichtel [Thu, 20 Apr 2017 13:11:23 +0000 (15:11 +0200)]
igb_uio: switch to new irq function for MSI-X

pci_enable_msix() will be removed in kernel 4.12.
The new API pci_alloc_irq_vectors() is available
since linux 4.8, thus let's use it.

Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=aff171641d18
Link: https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git/commit/?id=4244de1c64de
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
7 years agonet/i40e: fix build on ppc64le
Gowrishankar Muthukrishnan [Thu, 20 Apr 2017 07:39:18 +0000 (13:09 +0530)]
net/i40e: fix build on ppc64le

A typo introduced in i40e_rxtx_vec_altivec.c

Fixes: 67f038076657 ("net/i40e: enable per-device packet type mapping")

Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
7 years agoeal/ppc: fix mmap for memory initialization
Chao Zhu [Thu, 6 Apr 2017 10:06:09 +0000 (15:36 +0530)]
eal/ppc: fix mmap for memory initialization

On IBM POWER platform, when mapping /dev/zero file to hugepage memory
space, mmap will not respect the requested address hint. This will cause
the memory initialization for the second process fails. This patch adds
the required mmap flags to make it work. Beside this, users need to set
the nr_overcommit_hugepages to expand the VA range. When
doing the initialization, users need to set both nr_hugepages and
nr_overcommit_hugepages to the same value, like 64, 128, etc.

Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agolog: fix dump of registered logs when disabled
Olivier Matz [Tue, 18 Apr 2017 14:22:25 +0000 (16:22 +0200)]
log: fix dump of registered logs when disabled

When we pass --log-level=0, it disables the logs. This level is
not displayed properly by the function that dumps the registered log
types (it shows "unknown"). Show "disabled" instead.

Before:

  ./build/app/test --log-level=0
  RTE>>dump_log_types
  global log level is unknown
  ...

After:

  ./build/app/test --log-level=0
  RTE>>dump_log_types
  global log level is disabled
  ...

Fixes: 432050bfd05b ("eal: dump registered log types")

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
7 years agolog: fix log level regexp matching
Olivier Matz [Tue, 18 Apr 2017 14:22:24 +0000 (16:22 +0200)]
log: fix log level regexp matching

Fix misuse of regular expression functions, which was producing a
segfault.

After the patch, it works properly:

  $ ./build/app/test --no-huge --log-level=pmd,3
  RTE>>dump_log_types
  [...]
  id 30: user7, level is debug
  id 31: user8, level is debug
  id 32: pmd.i40e.init, level is critical
  id 33: pmd.i40e.driver, level is critical

Coverity issue: 143472
Fixes: a5279180f510 ("eal: change several log levels matching a regexp")

Reported-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
7 years agoeal: remove undue printf
Olivier Matz [Tue, 18 Apr 2017 14:22:23 +0000 (16:22 +0200)]
eal: remove undue printf

Remove the printf displaying the log level at initialization. It
was introduced for debug purpose, but was not intended to be pushed.

Fixes: 845afe51e428 ("eal: change specific log levels at startup")

Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
7 years agoeal: remove log level from internal config
Olivier Matz [Tue, 18 Apr 2017 14:22:22 +0000 (16:22 +0200)]
eal: remove log level from internal config

This field is only used in the initialization phase. Remove it since the
global log level can also be retrieved using a public API:
rte_log_get_global_level().

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
7 years agoeal: move internal config initialization
Olivier Matz [Tue, 18 Apr 2017 14:22:21 +0000 (16:22 +0200)]
eal: move internal config initialization

It's better to initialize the internal config in rte_eal_init()
instead of eal_log_level_parse(), since this structure is not only
about logs.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
7 years agolog: fix default level
Olivier Matz [Tue, 18 Apr 2017 14:22:20 +0000 (16:22 +0200)]
log: fix default level

The initialization of the default log level (from configuration) was
removed by mistake in a previous commit. The global log level was
wrongly set to debug when no --log-level argument was passed. Restore
this initialization.

Before:
  $ ./build/app/test
  RTE>>dump_log_types
  global log level is debug
  ...

After:
  $ ./build/app/test
  RTE>>dump_log_types
  global log level is info
  ...

Fixes: 845afe51e428 ("eal: change specific log levels at startup")

Reported-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
7 years agolog: redefine logtype values
Pablo de Lara [Wed, 19 Apr 2017 14:06:34 +0000 (15:06 +0100)]
log: redefine logtype values

After the changes in commit c1b5fa94a46f
("eal: support dynamic log types"), logtype is not treated as a
bitmask, but a decimal value. Therefore, values have to be
converted.

Fixes: c1b5fa94a46f ("eal: support dynamic log types")

Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
7 years agomaintainers: update email address
Thomas Monjalon [Tue, 18 Apr 2017 21:36:51 +0000 (23:36 +0200)]
maintainers: update email address

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
7 years agomaintainers: update for ixgbe
Wenzhuo Lu [Fri, 14 Apr 2017 01:20:30 +0000 (09:20 +0800)]
maintainers: update for ixgbe

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
7 years agomaintainers: update for ena
Marcin Wojtas [Wed, 12 Apr 2017 14:21:49 +0000 (16:21 +0200)]
maintainers: update for ena

Following changes of the ENA driver ownership in Amazon and Semihalf
(Jakub and Jan no longer work in the company), update driver's
maintainers list.

Special thanks to Jan Medala and Jakub Palider for their support and
development.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: Jan Medala <jan.medala@outlook.com>
7 years agoevent/sw: fix events mis-identified as needing reorder
Bruce Richardson [Fri, 14 Apr 2017 15:18:15 +0000 (16:18 +0100)]
event/sw: fix events mis-identified as needing reorder

When taking events from a port, we checked the history list to check if the
event needed to be put back in order i.e. originally came from a reordered
queue type. The check for reordering involved checking if the reorder
buffer entry pointer was null. However, after that pointer was used it was
never cleared to null again.

This caused problems when we had mixed reordered and atomic or parallel
events, as the events from the latter two queue types were misidentified as
needing reordering. This let in some cases to crashes, but mostly led to
dropping events, and then application lock-up.

Fixes: 617995dfc5b2 ("event/sw: add scheduling logic")

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
7 years agoevent/sw: fix credit return on invalid queue id
Harry van Haaren [Tue, 18 Apr 2017 09:58:40 +0000 (10:58 +0100)]
event/sw: fix credit return on invalid queue id

This patch returns a credit when an rte_event is
enqueued with an invalid queue_id. Previously a
credit was leaked from the system.

Note that the eventdev instance does not attempt
to free any resources that the rte_event owns. As
a result, resources owned by the rte_event are leaked.
Eg. if the rte_event represents an rte_mbuf, the mbuf
will not be freed, and causes a leak from the mempool.

Fixes: 656af9180014 ("event/sw: add worker core functions")

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
7 years agoevent/sw: fix hashing of flow on ordered ingress
Harry van Haaren [Mon, 10 Apr 2017 15:56:43 +0000 (16:56 +0100)]
event/sw: fix hashing of flow on ordered ingress

The flow id of packets was not being hashed on ingress
on an ordered queue. Fix by applying same hashing as is
applied in the atomic queue case. The hashing itself is
broken out into a macro to avoid duplication of code.

Fixes: 617995dfc5b2 ("event/sw: add scheduling logic")

Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
7 years agokni: fix ethtool support
Ferruh Yigit [Thu, 13 Apr 2017 13:34:37 +0000 (14:34 +0100)]
kni: fix ethtool support

Use correct config option, without CONFIG prefix.

Fixes: b2b0f85182ef ("kni: add build option for ethtool support")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
7 years agomk: increase unsupported icc version for thunderx
Ferruh Yigit [Tue, 11 Apr 2017 16:52:08 +0000 (17:52 +0100)]
mk: increase unsupported icc version for thunderx

Increase unsupported ICC version for thunderx PMD to <= 16

Build error reported:
http://dpdk.org/ml/archives/dev/2017-April/063647.html

Fixes: 0b9ce550c4f6 ("net/thunderx: disable PMD for old compilers")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
7 years agovhost: fix dequeue zero copy
Yuanhan Liu [Wed, 19 Apr 2017 05:26:01 +0000 (13:26 +0800)]
vhost: fix dequeue zero copy

For zero copy mode, we need pin the mbuf to not let the underlaying PMD
driver (or the app) free the mbuf. Currently, only the heading mbuf is
pinned. However, the mbuf free function would try to free all mbufs
in the mbuf chain (-1 to the refcnt). This may lead the head mbuf being
still pinned, while the other subsequent mbufs are actually freed. Which
is wrong.

It becomes more fatal after the mbuf refactor, more specificly, after
the commit 8f094a9ac5d7 ("mbuf: set mbuf fields while in pool"). The
refcnt resets to 1 after the last real reference. OTOH, it leads to a
situtation that we never know one mbuf is actually freed or not. This
would result the mbuf __just__ after the heading mbuf being freed twice:
it's firstly freed (and put back to mempool) when the underlaying PMD
finishes the DMA.  Later, it will then be freed again when vhost unpins
it. Meaning, one mbuf may be returned to the mempool twice, while in
turn, being allocated twice later. Something uncertain may happen then.
For example, the VM2VM case becomes broken.

Fixes: b0a985d1f340 ("vhost: add dequeue zero copy")
Cc: stable@dpdk.org
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
7 years agonet/virtio: support to turn on/off traffic flow
Zhiyong Yang [Wed, 19 Apr 2017 06:29:21 +0000 (14:29 +0800)]
net/virtio: support to turn on/off traffic flow

Current virtio_dev_stop only disables interrupt and marks link down,
When it is invoked, tx/rx traffic flows still work. This is a strange
behavior. The patch supports the switch of flow.

Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
7 years agonet/virtio-user: fix address on 32-bit system
Jianfeng Tan [Wed, 19 Apr 2017 02:30:33 +0000 (02:30 +0000)]
net/virtio-user: fix address on 32-bit system

virtio-user cannot work on 32-bit system as higher 32-bit of the
addr field (64-bit) in the desc is filled with non-zero value
which should not happen for a 32-bit system.

In case of virtio-user, we use buf_addr of mbuf to fill the
virtqueue desc addr. This is a regression bug. For 32-bit system,
the first 4 bytes of mbuf is buf_addr, with following 8 bytes for
buf_phyaddr. With below wrong definition, both buf_addr and lower
4 bytes buf_phyaddr are obtained to fill the virtqueue desc.
  #define VIRTIO_MBUF_ADDR(mb, vq) \
(*(uint64_t *)((uintptr_t)(mb) + (vq)->offset))

Fixes: 25f80d108780 ("net/virtio: fix packet corruption")
Cc: stable@dpdk.org
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
7 years agovhost: avoid memory write on net header when necessary
Yuanhan Liu [Fri, 14 Apr 2017 07:53:18 +0000 (15:53 +0800)]
vhost: avoid memory write on net header when necessary

Like what we did for virtio PMD driver [0][1], we could also apply such
trick to vhost, to avoid the memory write on net header when necessary.

[0]: c9ea670c1dc7 ("net/virtio: fix performance regression due to TSO")
[1]: 16994abee215 ("net/virtio: optimize header reset on any layout")

With this, the cache issue of the mergeable path is again greatly reduced:
even the write of "num_buffers" could be avoided. A quick PVP test shows
the gap between the mergeable Rx and non-mergeable Rx is pretty small now:
they are basically the same in my test.

Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
7 years agonet/virtio-user: fix link status
Jianfeng Tan [Fri, 14 Apr 2017 06:10:30 +0000 (06:10 +0000)]
net/virtio-user: fix link status

Previously, we miss to set intr_handle->fd which will be used as
target file for epoll to check LSC.

As a result, stdin (0) is used and intr thread keeps busy whenever
data comes from stdin.

To fix this, we use vhostfd as the target file for epoll to check
the link status change events. And we move intr_handle initialization
after vhost backend settup to make sure vhostfd is initialized.

Fixes: 35c4f8554833 ("net/virtio-user: support to report net status")

Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
7 years agonet/virtio: fix link status always being up
Yuanhan Liu [Fri, 14 Apr 2017 06:36:45 +0000 (14:36 +0800)]
net/virtio: fix link status always being up

The virtio port link status will always be UP, even the port is stopped:

    testpmd> port stop 0
    Stopping ports...
    Checking link statuses...
    Port 0 Link Up - speed 10000 Mbps - full-duplex
    Done

The link status is queried by link_update callback when LSC is disabled.
Which in turn queries the "status" field.  However, the "status" is
read-only. I couldn't think of some proper ways to change the status
without doing device reset.

Instead of doing (the heavy) reset at stop, this patch introduced a flag,
which is set to 1 and 0 on start and stop, respectively. When it's set to
0, the link status is set to DOWN unconditionally.

Fixes: a85786dc816f ("virtio: fix states handling during initialization")
Cc: stable@dpdk.org
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
7 years agovhost: fix use after free
Yuanhan Liu [Mon, 17 Apr 2017 07:27:04 +0000 (15:27 +0800)]
vhost: fix use after free

A "return" is missing on error, which could lead to a "use after free"
issue (about var "conn").

Coverity issue: 143476
Fixes: 65388b43f592 ("vhost: fix fd leaks for vhost-user server mode")

Reported-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
7 years agonet/virtio-user: fix net status report
Jianfeng Tan [Thu, 13 Apr 2017 14:16:24 +0000 (14:16 +0000)]
net/virtio-user: fix net status report

We only enabled LSC when using vhost-user as the backend, but it is
reported even when using vhost-kernel as the backend.

Fix it by only reportting LSC support when using vhost-user as the
backend.

Fixes: 35c4f8554833 ("net/virtio-user: support to report net status")

Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
7 years agonet/virtio-user: fix feature negotiation
Jianfeng Tan [Thu, 13 Apr 2017 10:11:27 +0000 (10:11 +0000)]
net/virtio-user: fix feature negotiation

The feature negotiation in virtio-user is proven to be broken,
which results in device initialization failure.

Originally, we get features from vhost backend, and remove those
that are not supported. But when new feature is added, for example,
VIRTIO_NET_F_MTU, we fail to remove this new feature. Then, this
new feature will be negotiated, as both frontend and backend claim
to support this feature.

To fix it, we add a macro to record supported features, as a filter
to remove newly added features.

Fixes: 37a7eb2ae816 ("net/virtio-user: add device emulation layer")

Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
7 years agonet/vhost: stop dev in close and address mem leak
Sagar Abhang [Fri, 7 Apr 2017 00:26:37 +0000 (17:26 -0700)]
net/vhost: stop dev in close and address mem leak

Move the call to stop the device inside the close routine because close
needs to stop the device if it isn't stopped.

Free the allocated queue buffers in close instead of doing so in remove.
Original code had these clean ups in remove which was causing memory
leak.

Signed-off-by: Sagar Abhang <sabhang@brocade.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
7 years agonet/virtio: fix queue notify
Xiao Wang [Tue, 11 Apr 2017 10:44:28 +0000 (03:44 -0700)]
net/virtio: fix queue notify

According to spec, we should write virtqueue index into the notify
address, rather than 1. Besides, some HW backend may rely on the data
written to identify which queue need to serve.

Fixes: 6ba1f63b5ab0 ("virtio: support specification 1.0")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
7 years agonet/mlx5: fix parameters defaults
Shahaf Shuler [Tue, 18 Apr 2017 10:22:28 +0000 (13:22 +0300)]
net/mlx5: fix parameters defaults

With the Enhanced multi packet send addition, the defaults were made
in order to get the maximum out of the box performance.
Features like tso, don't use the enhanced send, however the defaults
are still valid. This cause Tx queue creation to fail.

Fixes: 3f13f8c23a7c ("net/mlx5: support hardware TSO")
Fixes: 6ce84bd88919 ("net/mlx5: add enhanced multi-packet send for ConnectX-5")

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
7 years agonet/mlx5: rework parameters parsing
Shahaf Shuler [Tue, 18 Apr 2017 10:22:27 +0000 (13:22 +0300)]
net/mlx5: rework parameters parsing

Currently the argument process is done without indication which
parameter was forced by the application and which one is on it
default value.
This becomes problematic when different features requires different
defaults. For example, Enhanced multi packet send and TSO.

This commit modifies the argument process, enabling to differ
which parameter was forced by the application.

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
7 years agodoc: update supported liquidio adapters
Shijith Thotton [Wed, 19 Apr 2017 07:26:07 +0000 (12:56 +0530)]
doc: update supported liquidio adapters

Add CN23XX 225SV to the list of supported LiquidIO adapters.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
7 years agonet/liquidio: support 25G link speed
Shijith Thotton [Wed, 19 Apr 2017 07:26:06 +0000 (12:56 +0530)]
net/liquidio: support 25G link speed

Add case to handle 25G link speed and thereby support
LiquidIO II CN23XX 225SV (2x25G) adapter.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
7 years agonet/i40e: add check for invalid VF queue number
Beilei Xing [Tue, 18 Apr 2017 08:46:20 +0000 (16:46 +0800)]
net/i40e: add check for invalid VF queue number

Add check to avoid invalid VF queue number is used in
tunnel filter.

Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
7 years agonet/sfc: correct RSS hash availability condition
Andrew Rybchenko [Tue, 18 Apr 2017 13:03:08 +0000 (14:03 +0100)]
net/sfc: correct RSS hash availability condition

RSS hash is computed by hardware if corresponding Rx filter (for
example, default Rx filters) has RSS flag set which is set if
the number of RSS channels is greater than zero.

Fixes: 4ec1fc3ba881 ("net/sfc: add basic stubs for RSS support on driver attach")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
7 years agonet/sfc: use zero RSS channels as disabled RSS indicator
Andrew Rybchenko [Tue, 18 Apr 2017 13:03:07 +0000 (14:03 +0100)]
net/sfc: use zero RSS channels as disabled RSS indicator

Enabled RSS enables RSS hash computation and provision in pseudo header.
It still makes sense for applications even if only one Rx queue is used.

Fixes: 4ec1fc3ba881 ("net/sfc: add basic stubs for RSS support on driver attach")
Fixes: 088e17210a7a ("net/sfc: query RSS key and hash types config")
Fixes: 82faef507608 ("net/sfc: set RSS key and hash types config")
Fixes: af0d9317970c ("net/sfc: query RSS redirection table")
Fixes: 32bcfb0a50b1 ("net/sfc: update RSS redirection table")
Fixes: f5258439ee5d ("net/sfc: avoid failure on port start if Rx mode is rejected")

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
7 years agonet/sfc: reset RSS channels back to 0 on close
Andrew Rybchenko [Tue, 18 Apr 2017 13:03:06 +0000 (14:03 +0100)]
net/sfc: reset RSS channels back to 0 on close

Fixes: 4ec1fc3ba881 ("net/sfc: add basic stubs for RSS support on driver attach")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
7 years agonet/sfc: remove logically dead code
Andrew Rybchenko [Tue, 18 Apr 2017 12:51:01 +0000 (13:51 +0100)]
net/sfc: remove logically dead code

Coverity issue: 1419717
Fixes: a9825ccf5bb8 ("net/sfc: support flow API filters")

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
7 years agonet/mlx5: fix empty RSS flow action
Nélio Laranjeiro [Tue, 18 Apr 2017 08:30:11 +0000 (10:30 +0200)]
net/mlx5: fix empty RSS flow action

Empty RSS action is causing a segmentation fault.

Fixes: 3d821d6fea40 ("net/mlx5: support RSS action flow rule")

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
7 years agonet/mlx5: change calculating inline room for Tx
Yongseok Koh [Thu, 13 Apr 2017 17:46:51 +0000 (10:46 -0700)]
net/mlx5: change calculating inline room for Tx

Current implementation is error-prone if the max inline size
(txq->max_inilne) is decoupled from txq->inline_en and becomes zero. If it
becomes zero, HW can crash due to WQ overflow.

Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
7 years agonet/i40e: downgrade error log
Wenzhuo Lu [Mon, 17 Apr 2017 06:53:58 +0000 (14:53 +0800)]
net/i40e: downgrade error log

When deleting the default MAC VLAN filter, it's
expected that it may fail.
So downgrade the error print from warning to
debug.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
7 years agonet/i40e: downgrade log message
Bernard Iremonger [Fri, 14 Apr 2017 10:11:24 +0000 (11:11 +0100)]
net/i40e: downgrade log message

Change level of log message from ERR to DEBUG and reword it,
in the i40e_dev_consistent_tunnel_filter_set() function.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
7 years agodoc: add known igb_uio issue for i40e
Qiming Yang [Thu, 13 Apr 2017 03:08:33 +0000 (11:08 +0800)]
doc: add known igb_uio issue for i40e

When insmod "igb_uio" with "intr_mode=legacy and test link
status interrupt. Since INTx interrupt is not supported by
X710/XL710/XXV710, it will cause Input/Output error when
reading file descriptor.

Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agodoc: fix description on Intel VFs
Jingjing Wu [Tue, 11 Apr 2017 05:57:18 +0000 (13:57 +0800)]
doc: fix description on Intel VFs

This patch corrects the description on Physical and Virtual Function
Infrastructure of Intel NICs. The RSS part description should belong
to ixgbe but not i40e.
This patch also add more notes to describe the queue number on Intel
X710/XL710 NICs.

Fixes: b9fcaeec5fc0 ("doc: add ixgbe VF RSS guide")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agonet/i40e: ensure vector mode is not used with QinQ
Bernard Iremonger [Thu, 13 Apr 2017 09:53:05 +0000 (10:53 +0100)]
net/i40e: ensure vector mode is not used with QinQ

In rx vector mode, QinQ is not supported.
When hw_vlan_extend is set for QinQ ensure that
rx vector mode is not selected.

Fixes: 8e109464c022 ("i40e: allow vector Rx and Tx usage")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
7 years agodoc: add QinQ flow to testpmd guide
Bernard Iremonger [Fri, 7 Apr 2017 15:14:52 +0000 (16:14 +0100)]
doc: add QinQ flow to testpmd guide

Add information on validating and creating QinQ flow rules to
the flow rules management section of the Testpmd User Guide.

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agodoc: add release note for i40e QinQ cloud filter
Bernard Iremonger [Fri, 7 Apr 2017 15:14:51 +0000 (16:14 +0100)]
doc: add release note for i40e QinQ cloud filter

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agonet/thunderx: reduce writes to mbuf
Jerin Jacob [Fri, 14 Apr 2017 09:41:07 +0000 (15:11 +0530)]
net/thunderx: reduce writes to mbuf

With the mbuf rework, we now have 8 contiguous bytes to be
rearmed in the mbuf at 8B naturally aligned address.
Use single 8B write to avoid multiple 2B writes in Rx path.

Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
7 years agonet/i40e: downgrade unnecessary error log
Wenzhuo Lu [Fri, 14 Apr 2017 01:16:34 +0000 (09:16 +0800)]
net/i40e: downgrade unnecessary error log

When receiving the unsupported AQ messages, it's taken as
an error. It's not appropriate and triggers too much
unnecessary print.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
7 years agonet/mlx4: fix Rx after mbuf alloc failure
Charles Myers [Thu, 13 Apr 2017 22:15:24 +0000 (12:15 -1000)]
net/mlx4: fix Rx after mbuf alloc failure

Fixes issue where mlx4 driver stops receiving packets when mbuf
allocation fails in mlx4_rx_burst().

This issue appears to be caused because the code doesn't recycle the
existing mbuf to the sges array when mbuf allocation fails as is done
in the code right above it which handles (wc.status != IBV_WC_SUCCESS).

Copying the code from the above case fixes the issue.

Fixes: acac55f16412 ("mlx4: use MOFED 3.0 fast verbs interface for Rx operations")
Cc: stable@dpdk.org
Signed-off-by: Charles Myers <charles.myers@spirent.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
7 years agonet/bonding: allow configuring jumbo frames without slaves
Ilya Maximets [Fri, 7 Apr 2017 15:07:12 +0000 (18:07 +0300)]
net/bonding: allow configuring jumbo frames without slaves

Currently, 'rte_eth_dev_configure' fails on attempt to setup
max_rx_pkt_len > 2048 if no slaves was added to bonded device.

For example:

rte_eth_dev_attach("eth_bond0,slave=05:00.0,mode=l34", &id)
conf.rxmode.jumbo_frame = 1;
conf.rxmode.max_rx_pkt_len = 9000;
rte_eth_dev_configure(id, 1, 1, &conf)

Result:
EAL: Initializing pmd_bond for eth_bond0
EAL: Create bonded device eth_bond0 on port 4 in mode 2 on socket 0.
rte_eth_dev_configure: ethdev port_id=4 \
max_rx_pkt_len 9018 > max valid value 2048

It's expected that slaves will be added to bonded device inside
'rte_eth_dev_configure' and proper 'max_rx_pktlen' configured
for all of them.

Failure happens because of hardcoded low value of 'max_rx_pktlen'.
Increasing of this value to ETHER_MAX_JUMBO_FRAME_LEN will allow
above scenario (attach + configure).

It is important because it is the way OVS wants to work with
all DPDK devices (including virtual).
Changing the default hardcoded value makes no harm because
all the slaves' related code uses only 'candidate_max_rx_pktlen'
variable.

Fixes: 6cfc6a4f0d61 ("net/bonding: inherit maximum Rx packet length")
CC: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Eric Kinzie <ehkinzie@gmail.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
7 years agonet/bonding: remove all slaves on close
Ilya Maximets [Thu, 6 Apr 2017 11:59:51 +0000 (14:59 +0300)]
net/bonding: remove all slaves on close

Some applications like OVS knows nothing about the
device type and wants to use same API to work with
all of them. But bond_pmd, unlike other pmds, requires
additional step (removing of all the slaves) before
closing the device.

In fact that bond_pmd automatically adds all the
devices from kvargs to bonding on configuration it
also should remove all of them on close.

This change is intended to have the same API for physical
and virtual devices. It allows us to handle virtual
devices in OVS in a common way.

Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
7 years agonet/ixgbe: remove tpid check for flow director
Wei Zhao [Fri, 14 Apr 2017 03:34:10 +0000 (11:34 +0800)]
net/ixgbe: remove tpid check for flow director

DPDK community has several emails discussion on this topic,
these mails link is bellow:
http://dpdk.org/ml/archives/dev/2017-March/060379.html,
http://dpdk.org/ml/archives/dev/2017-March/060295.html,

items like VLAN can already have several valid "types"
(0x88a8, 0x8100, 0x9100), and who knows what will come up
in the future.

And ixgbe_flow just ignores the types when do filter configuration.
So it may be reasonable to delete the related tpid check process.

Also add some more comment log on stack explanation.

Fixes: 11777435c72 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
7 years agonet/ixgbe: fix duplicated check
Ferruh Yigit [Tue, 11 Apr 2017 14:24:15 +0000 (15:24 +0100)]
net/ixgbe: fix duplicated check

Same check duplicated, updated check according what commend states.

Coverity issue: 1407507
Fixes: 11777435c727 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
7 years agonet/mlx5: panic when destroying a queue in use
Nélio Laranjeiro [Tue, 11 Apr 2017 15:21:52 +0000 (17:21 +0200)]
net/mlx5: panic when destroying a queue in use

Since the queue release API does not allow failures (return value is void)
and the flow API does not allow a queue to be released as long as a flow
rule depends on it, the only rational decision to avoid undefined behavior
is to panic in this situation.

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
7 years agonet/mlx5: fix flow queues array allocation
Nélio Laranjeiro [Tue, 11 Apr 2017 15:21:51 +0000 (17:21 +0200)]
net/mlx5: fix flow queues array allocation

Flow queues array offset is not properly computed causing all sorts of
issues.  Address it by making the rte_flow structure less complex.

Fixes: 360663e1df46 ("net/mlx5: prepare support for RSS action rule")

Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
7 years agonet/i40e: fix VF link status update
Qi Zhang [Wed, 12 Apr 2017 19:30:00 +0000 (15:30 -0400)]
net/i40e: fix VF link status update

VF link status rely on PF's notification, so when PF link status
be updated, it should notify VF to update link status also.
Current implementation only cover part of the situation when PF's link
status is updated, call i40e_notify_all_vfs_link_status in
i4e_dev_link_update will cover all situationa.

Fixes: bb6722fb5c0e ("net/i40e: fix VF bonded device link down")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
7 years agoapp/testpmd: add commands for packet type mapping
Qi Zhang [Wed, 12 Apr 2017 13:55:34 +0000 (09:55 -0400)]
app/testpmd: add commands for packet type mapping

Add below command line to configure ptype mapping.
ptype mapping get <port_id> <valid_only>.
ptype mapping replace <port_id> <target> <mask> <pkt_type>.
ptype mapping reset <port_id>.
ptype mapping update <port_id> <hw_ptype> <sw_ptype>.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
7 years agonet/i40e: configure packet type mapping
Qi Zhang [Wed, 12 Apr 2017 13:55:33 +0000 (09:55 -0400)]
net/i40e: configure packet type mapping

The patch adds 4 APIs to support configurable
PTYPE mapping for i40e device.
rte_pmd_i40e_ptype_mapping_get.
rte_pmd_i40e_ptype_mapping_replace.
rte_pmd_i40e_ptype_mapping_reset.
rte_pmd_i40e_ptype_mapping_update.
The mapping from hardware defined packet type to software defined packet
type can be updated/reset/read out with these APIs.
Also a software ptype with the most significent bit set will be regarded
as a user defined ptype (RTE_PMD_I40E_PTYPE_USER_DEFINE_MASK) so
application can use it to defined its own PTYPE naming system.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
7 years agonet/i40e: enable per-device packet type mapping
Qi Zhang [Wed, 12 Apr 2017 13:55:32 +0000 (09:55 -0400)]
net/i40e: enable per-device packet type mapping

The mapping from hardware defined packet type to software defined
packet type is static for i40e device, the patch let each ethdev to
to have their own copy of mapping table, this give the possibility
that different ethdev can be set different PTYPE mapping rule which
is the requirement to support following hardware's dynamic PTYPE
feature.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
7 years agonet/ixgbe: fix generic filter return
Wei Zhao [Wed, 12 Apr 2017 08:52:34 +0000 (16:52 +0800)]
net/ixgbe: fix generic filter return

Fix generic filter return info is not readable
when repeat to create a rule.

Fixes: 72c135a89f8 ("net/ixgbe: create consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
7 years agonet/i40e: add more explanation for QoS APIs
Wenzhuo Lu [Thu, 13 Apr 2017 08:21:18 +0000 (16:21 +0800)]
net/i40e: add more explanation for QoS APIs

According to HW implementation, the bandwidth of QoS
means the L2 bandwidth, not count the bytes added by
physical layer.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
7 years agonet/kni: remove unnecessary null check
Ferruh Yigit [Tue, 11 Apr 2017 13:51:29 +0000 (14:51 +0100)]
net/kni: remove unnecessary null check

Coverity issue: 1419721
Fixes: 75e2bc54c018 ("net/kni: add KNI PMD")

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
7 years agodoc: cleanup testpmd section in dpaa2 guide
Shreyansh Jain [Thu, 13 Apr 2017 09:33:33 +0000 (15:03 +0530)]
doc: cleanup testpmd section in dpaa2 guide

Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agodoc: refer PMD compile/test section from thunderx guide
Shijith Thotton [Tue, 11 Apr 2017 18:56:50 +0000 (00:26 +0530)]
doc: refer PMD compile/test section from thunderx guide

Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
7 years agodoc: refer PMD compile/test section from qede guide
Shijith Thotton [Tue, 11 Apr 2017 18:56:49 +0000 (00:26 +0530)]
doc: refer PMD compile/test section from qede guide

Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agodoc: refer PMD compile/test section from nfp guide
Shijith Thotton [Tue, 11 Apr 2017 18:56:48 +0000 (00:26 +0530)]
doc: refer PMD compile/test section from nfp guide

Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agodoc: refer PMD compile/test section from liquidio guide
Shijith Thotton [Tue, 11 Apr 2017 18:56:47 +0000 (00:26 +0530)]
doc: refer PMD compile/test section from liquidio guide

Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agodoc: refer PMD compile/test section from i40e guide
Shijith Thotton [Tue, 11 Apr 2017 18:56:46 +0000 (00:26 +0530)]
doc: refer PMD compile/test section from i40e guide

Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agodoc: refer PMD compile/test section from ena guide
Shijith Thotton [Tue, 11 Apr 2017 18:56:45 +0000 (00:26 +0530)]
doc: refer PMD compile/test section from ena guide

Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agodoc: refer PMD compile/test section from cxgbe guide
Shijith Thotton [Tue, 11 Apr 2017 18:56:44 +0000 (00:26 +0530)]
doc: refer PMD compile/test section from cxgbe guide

Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agodoc: refer PMD compile/test section from bnx2x guide
Shijith Thotton [Tue, 11 Apr 2017 18:56:43 +0000 (00:26 +0530)]
doc: refer PMD compile/test section from bnx2x guide

Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agodoc: refer PMD compile/test section from ark guide
Shijith Thotton [Tue, 11 Apr 2017 18:56:42 +0000 (00:26 +0530)]
doc: refer PMD compile/test section from ark guide

Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
7 years agodoc: explain compiling and testing of PMD
Shijith Thotton [Tue, 11 Apr 2017 18:56:41 +0000 (00:26 +0530)]
doc: explain compiling and testing of PMD

Add a section in NIC drivers documentation to explain compiling and
testing of a PMD. It also mentions about host setup, which is required
before running testpmd.

Add label "testpmd_ug" to refer user guide.

Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agonet/dpaa2: enable frame queue based dequeuing
Hemant Agrawal [Tue, 11 Apr 2017 13:49:38 +0000 (19:19 +0530)]
net/dpaa2: enable frame queue based dequeuing

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: enable DMA mapping during device scanning
Hemant Agrawal [Tue, 11 Apr 2017 13:49:37 +0000 (19:19 +0530)]
net/dpaa2: enable DMA mapping during device scanning

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agoconfig: add configuration for toggling physical addressing
Hemant Agrawal [Tue, 11 Apr 2017 13:49:36 +0000 (19:19 +0530)]
config: add configuration for toggling physical addressing

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: enable physical addressing for packet buffers
Hemant Agrawal [Tue, 11 Apr 2017 13:49:35 +0000 (19:19 +0530)]
net/dpaa2: enable physical addressing for packet buffers

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: handle non-hardware backed buffer pool
Hemant Agrawal [Tue, 11 Apr 2017 13:49:34 +0000 (19:19 +0530)]
net/dpaa2: handle non-hardware backed buffer pool

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: enable stashing for LS2088A devices
Hemant Agrawal [Tue, 11 Apr 2017 13:49:33 +0000 (19:19 +0530)]
net/dpaa2: enable stashing for LS2088A devices

As the hardware determines which core will process which packet,
performance is boosted by direct cache warming/stashing as well
as by providing biasing for core-to-flow affinity, which ensures
that flow-specific data structures can remain in the core’s cache.

This patch enables the one cache line data stashing for packet
annotation data and packet context

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: support basic stats
Hemant Agrawal [Tue, 11 Apr 2017 13:49:32 +0000 (19:19 +0530)]
net/dpaa2: support basic stats

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: update link status
Hemant Agrawal [Tue, 11 Apr 2017 13:49:31 +0000 (19:19 +0530)]
net/dpaa2: update link status

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: support Rx packet parsing
Hemant Agrawal [Tue, 11 Apr 2017 13:49:30 +0000 (19:19 +0530)]
net/dpaa2: support Rx packet parsing

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: enable Rx and Tx operations
Hemant Agrawal [Tue, 11 Apr 2017 13:49:29 +0000 (19:19 +0530)]
net/dpaa2: enable Rx and Tx operations

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: support MTU configuration
Hemant Agrawal [Tue, 11 Apr 2017 13:49:28 +0000 (19:19 +0530)]
net/dpaa2: support MTU configuration

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: support promiscuous mode
Hemant Agrawal [Tue, 11 Apr 2017 13:49:27 +0000 (19:19 +0530)]
net/dpaa2: support promiscuous mode

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: support L3 and L4 checksum offload
Hemant Agrawal [Tue, 11 Apr 2017 13:49:26 +0000 (19:19 +0530)]
net/dpaa2: support L3 and L4 checksum offload

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: attach the buffer pool to dpni
Hemant Agrawal [Tue, 11 Apr 2017 13:49:25 +0000 (19:19 +0530)]
net/dpaa2: attach the buffer pool to dpni

This patch configures a MC-DPNI based DPAA2 PMD network
port with a DPBP based buffer pool.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: configure MAC address at init
Hemant Agrawal [Tue, 11 Apr 2017 13:49:24 +0000 (19:19 +0530)]
net/dpaa2: configure MAC address at init

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: add RSS flow distribution
Hemant Agrawal [Tue, 11 Apr 2017 13:49:23 +0000 (19:19 +0530)]
net/dpaa2: add RSS flow distribution

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: add basic operations
Hemant Agrawal [Tue, 11 Apr 2017 13:49:22 +0000 (19:19 +0530)]
net/dpaa2: add basic operations

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: support MC dpni object
Hemant Agrawal [Tue, 11 Apr 2017 13:49:21 +0000 (19:19 +0530)]
net/dpaa2: support MC dpni object

This patch add support for dpni object support in MC driver.

DPNI represent a network interface object in DPAA2.

Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agonet/dpaa2: support debug log
Hemant Agrawal [Tue, 11 Apr 2017 13:49:19 +0000 (19:19 +0530)]
net/dpaa2: support debug log

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agodoc: add DPAA2 NIC details
Hemant Agrawal [Tue, 11 Apr 2017 13:49:18 +0000 (19:19 +0530)]
doc: add DPAA2 NIC details

This patch adds the NXP dpaa2 architecture and pmd details
in the Network interfaces section.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
7 years agonet/dpaa2: introduce NXP DPAA2 driver
Hemant Agrawal [Tue, 11 Apr 2017 13:49:17 +0000 (19:19 +0530)]
net/dpaa2: introduce NXP DPAA2 driver

add support for fsl-mc bus based dpaa2 pmd driver.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agomempool/dpaa2: add hardware offloaded mempool
Hemant Agrawal [Tue, 11 Apr 2017 13:42:39 +0000 (19:12 +0530)]
mempool/dpaa2: add hardware offloaded mempool

DPAA2 Hardware Mempool handlers allow enqueue/dequeue from NXP's
QBMAN hardware block.
CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS is set to 'dpaa2', if the pool
is enabled.

This memory pool currently supports packet mbuf type blocks only.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agobus/fslmc: add frame queue based dq storage
Hemant Agrawal [Tue, 11 Apr 2017 13:37:27 +0000 (19:07 +0530)]
bus/fslmc: add frame queue based dq storage

This patch adds generic functions for allowing dq storage
for the frame queues.
As the frame queues are common resource for different drivers
this is helpful.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agobus/fslmc: support DMA mapping for ARM SMMU
Hemant Agrawal [Tue, 11 Apr 2017 13:37:26 +0000 (19:07 +0530)]
bus/fslmc: support DMA mapping for ARM SMMU

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
7 years agobus/fslmc: add physical-virtual address translation helpers
Hemant Agrawal [Tue, 11 Apr 2017 13:37:25 +0000 (19:07 +0530)]
bus/fslmc: add physical-virtual address translation helpers

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>