Pablo de Lara [Thu, 19 Jun 2014 15:35:22 +0000 (16:35 +0100)]
eal: fix option --base-virtaddr
When parsing EAL option --base-virtaddr
errno was not being set to 0 before calling strtoull,
therefore function might fail unnecesarily.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Aaron Campbell <aaron@arbor.net>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Thomas Monjalon [Wed, 18 Jun 2014 23:13:25 +0000 (01:13 +0200)]
version: 1.7.0-rc1
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Anatoly Burakov [Wed, 18 Jun 2014 15:07:17 +0000 (16:07 +0100)]
vfio: more verbose error messages
also, making VFIO code distinguish between actual unexpected values
and ioctl() failures, providing appropriate error messages.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Anatoly Burakov [Wed, 18 Jun 2014 15:07:16 +0000 (16:07 +0100)]
vfio: open container at startup rather than during init
Currently, VFIO only checks for being able to access the /dev/vfio
directory when initializing VFIO, deferring actual VFIO container
initialization to VFIO binding code. This doesn't bode well for when
VFIO container cannot be initialized for whatever reason, because
it results in unrecoverable error even if the user didn't set up
VFIO and didn't even want to use it in the first place.
This patch fixes this by moving container initialization into the
code that checks if VFIO is available at runtime. Therefore, any
issues with the container will be known at initialization stage and
VFIO will simply be turned off if container could not be set up.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Bruce Richardson [Wed, 18 Jun 2014 20:33:07 +0000 (21:33 +0100)]
i40e: remove endian.h include
endian.h is not needed for the compilation of i40e_rxtx.c and its
inclusion prevents building on FreeBSD systems.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Bruce Richardson [Wed, 18 Jun 2014 20:33:05 +0000 (21:33 +0100)]
app/test-acl: remove unused variable
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Bruce Richardson [Tue, 17 Jun 2014 18:41:12 +0000 (19:41 +0100)]
app/testpmd: simplify handling of stats mappings error
Simplifiy the logic in the error checking branch. Rather than having a
single error branch which checked both RX and TX conditions and made
extensive use of the ? operator, move the error checking explicitly into
the RX and TX individual branches.
The original code caused compilation issues when attempting compilation
with clang on BSD, due to type mismatches. This change fixes the issues
while making the code easier to read and maintain overall.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Bruce Richardson [Wed, 18 Jun 2014 20:33:04 +0000 (21:33 +0100)]
app/testpmd: fix cmdline variable types
A number of commandline entries in the testpmd commandline were actually
defined as being string type values when in fact they were being
initialized as integer types. Correct this by specifying them as integer
type values in the type definition.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Bruce Richardson [Wed, 18 Jun 2014 20:33:06 +0000 (21:33 +0100)]
scripts: fix filtering of config comments on bsd
On BSD 10, the cpp binary behaves a little differently and often leaves
lines starting with a space before the inital '#' character. This change
ensures those lines are filtered out properly.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Shannon Zhao [Wed, 18 Jun 2014 04:18:15 +0000 (12:18 +0800)]
tools: fix alignment of cpu layout output
Bug: when "core id" is greater than 9, the cpu_layout.py output doesn't align.
Socket 0 Socket 1
--------- ---------
Core 9 [4, 16] [10, 22]
Core 10 [5, 17] [11, 23]
Solution: adjust output format to align based on the maximum length of the "core id" and "processor"
Socket 0 Socket 1
-------- --------
Core 9 [4, 16] [10, 22]
Core 10 [5, 17] [11, 23]
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Jijiang Liu [Wed, 18 Jun 2014 12:38:53 +0000 (14:38 +0200)]
ixgbe/base: update copyright to 2014
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 20:02:28 +0000 (22:02 +0200)]
ixgbe/base: various changes
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 20:02:04 +0000 (22:02 +0200)]
ixgbe/base: vf changes
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 19:59:50 +0000 (21:59 +0200)]
ixgbe/base: x540 changes
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 19:55:57 +0000 (21:55 +0200)]
ixgbe/base: filtering changes
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 19:52:48 +0000 (21:52 +0200)]
ixgbe/base: flow director changes
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 18:34:56 +0000 (20:34 +0200)]
ixgbe/base: allow to read in sff8472
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 19:01:03 +0000 (21:01 +0200)]
ixgbe/base: allow access to PHY register without lock
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 17:40:32 +0000 (19:40 +0200)]
ixgbe/base: rework protected access to autoc register
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 17:53:49 +0000 (19:53 +0200)]
ixgbe/base: rework locking
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 17:53:16 +0000 (19:53 +0200)]
ixgbe/base: rework flow control
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 13:46:07 +0000 (15:46 +0200)]
ixgbe/base: rework link negotiation
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 19:23:44 +0000 (21:23 +0200)]
ixgbe/base: disable laser control if manageability enabled
igned-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 18:53:32 +0000 (20:53 +0200)]
ixgbe/base: allow to disable link on D3
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 18:42:20 +0000 (20:42 +0200)]
ixgbe/base: allow to enable and disable Rx
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 18:46:21 +0000 (20:46 +0200)]
ixgbe/base: allow to read rtrup2tc register
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 15:44:15 +0000 (17:44 +0200)]
ixgbe/base: rework PCIe disabling
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 15:35:41 +0000 (17:35 +0200)]
ixgbe/base: name constants
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 15:15:39 +0000 (17:15 +0200)]
ixgbe/base: improve error handling
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 12:59:54 +0000 (14:59 +0200)]
ixgbe/base: minor changes
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 09:42:04 +0000 (11:42 +0200)]
e1000/base: update copyright to 2014
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 12:30:20 +0000 (14:30 +0200)]
e1000/base: various changes
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 11:57:39 +0000 (13:57 +0200)]
e1000/base: fix K1 beacon for 82579
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 10:31:31 +0000 (12:31 +0200)]
e1000/base: m88e1512 phy in 82575
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 12:26:25 +0000 (14:26 +0200)]
e1000/base: fix m88e1112 for 82575
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 11:58:53 +0000 (13:58 +0200)]
e1000/base: fix i354
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 12:22:26 +0000 (14:22 +0200)]
e1000/base: fix i217
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 10:28:10 +0000 (12:28 +0200)]
e1000/base: i210 PLL workaround
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 10:17:24 +0000 (12:17 +0200)]
e1000/base: improve error handling
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 10:23:28 +0000 (12:23 +0200)]
e1000/base: minor changes
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Jijiang Liu [Wed, 18 Jun 2014 10:08:12 +0000 (12:08 +0200)]
e1000/base: cleanup c10, ulp and nahum6 i218 support
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: split code drop]
Ivan Boule [Tue, 17 Jun 2014 18:09:32 +0000 (20:09 +0200)]
app/testpmd: command to configure MTU
Take avantage of the .set_mtu ethdev function and make it possible to configure
MTU on devices using testpmd.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Ivan Boule [Tue, 17 Jun 2014 18:09:31 +0000 (20:09 +0200)]
ixgbevf: allow to set MTU
The support of jumbo frames in the ixgbevf Poll Mode Driver of 10GbE
82599 VF functions consists in the following enhancements:
- Implement the mtu_set function in the ixgbevf PMD, using the IXGBE_VF_SET_LPE
request of the version 1.0 of the VF/PF mailbox API for this purpose.
- Add a detailed explanation on the VF/PF rx max frame len negotiation.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Samuel Gauthier [Tue, 17 Jun 2014 18:09:30 +0000 (20:09 +0200)]
ethdev: MTU accessors
This patch adds two new functions in ethdev api to retrieve current MTU and
change MTU of a port.
Only .mtu_set function is pmd specific.
pmd should update its max_rx_pkt_len if needed.
This operation has been implemented for rte_em_pmd, rte_igb_pmd and
rte_ixgbe_pmd.
Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com>
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
David Marchand [Tue, 17 Jun 2014 18:09:29 +0000 (20:09 +0200)]
ethdev: allow to force Rx scatter mode
We might want to be sure the scatter packets reception handler is selected in a
pmd. This makes it possible to then change mtu later, without the need of
restarting a port.
It is then the pmd duty to tell it enabled the scatter reception handler by
setting dev->data->scattered_rx to 1.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
David Marchand [Tue, 17 Jun 2014 18:09:28 +0000 (20:09 +0200)]
ethdev: store minimum Rx buffer size
This avoids code duplication in PMD when dealing with mtu changes.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
David Marchand [Tue, 17 Jun 2014 18:09:27 +0000 (20:09 +0200)]
ethdev: autoneg parameter in flow control accessors
Add autoneg field in flow control parameters.
This makes it easier to understand why changing some parameters does not always
have the expected result.
Changing autoneg is not supported at the moment.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Zijie Pan [Tue, 17 Jun 2014 18:09:26 +0000 (20:09 +0200)]
ethdev: retrieve flow control configuration
This patch adds a new function in ethdev api to retrieve current flow control
configuration.
This operation has been implemented for rte_em_pmd, rte_igb_pmd and
rte_ixgbe_pmd.
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Min Cao [Mon, 16 Jun 2014 03:22:11 +0000 (11:22 +0800)]
kvargs: fix build with gcc 4.5.1
GCC 4.5.1 warns about an uninitialized pointer:
error: 'ctx1' may be used uninitialized in this function
Signed-off-by: Min Cao <min.cao@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Helin Zhang [Thu, 5 Jun 2014 05:09:00 +0000 (13:09 +0800)]
app/testpmd: add L3 packet type in offload flags
As i40e PMD need to know the L3 packet type for TX checksum offloading,
the packet type has been added in rte_mbuf offload flags.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Helin Zhang [Thu, 5 Jun 2014 05:08:57 +0000 (13:08 +0800)]
app/testpmd: support displaying 32-byte Rx descriptors
i40e supports both 16 and 32 bytes RX descriptors, while ixgbe and
igb support 16 bytes size only. Code changes have been made in
test-pmd to support both 16 and 32 bytes RX descriptors according
to the configuration in config files.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Helin Zhang [Thu, 5 Jun 2014 05:08:46 +0000 (13:08 +0800)]
i40e: new poll mode driver
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Helin Zhang [Thu, 5 Jun 2014 05:08:45 +0000 (13:08 +0800)]
i40e: base driver
Add shared code source files to support basic operations to be
called in poll mode driver.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Helin Zhang [Thu, 5 Jun 2014 05:08:47 +0000 (13:08 +0800)]
pci: add i40e devices
The PCI device IDs of i40e have been added.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Helin Zhang [Thu, 5 Jun 2014 05:08:49 +0000 (13:08 +0800)]
mbuf: add new packet flags for i40e
New packet flags of both RX and TX have been added to support i40e.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Helin Zhang [Thu, 5 Jun 2014 05:08:50 +0000 (13:08 +0800)]
ethdev: set port based vlan
To support i40e, new ops has been added to support setting
port based vlan insertion.
New command 'tx_vlan set pvid port_id vlan_id (on|off)'
has been added in testpmd to configure port based vlan insertion.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Helin Zhang [Thu, 5 Jun 2014 05:08:50 +0000 (13:08 +0800)]
ethdev: function to compare ethernet addresses
To support i40e, function is_same_ether_addr() has been added to
compare two ethernet address.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Helin Zhang [Thu, 5 Jun 2014 05:08:50 +0000 (13:08 +0800)]
ethdev: new link speeds
For i40e support, new link speeds are needed.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Helin Zhang [Thu, 5 Jun 2014 05:08:50 +0000 (13:08 +0800)]
ethdev: more RSS flags
- i40e RSS flags have been added (and enlarged to 64-bit)
- A new configuration of 'uint8_t rss_key_len' has been added in
'struct rte_eth_rss_conf' to support different length of RSS keys.
- In each PMD, only the supported flags are masked.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Helin Zhang [Thu, 5 Jun 2014 05:08:51 +0000 (13:08 +0800)]
ethdev: allow maximum packet length to less than 1518
In ethdev, it ignores setting maximum packet length to less than
1518. The changes is to remove this limitation and let less than
1518 can be set for 'maximum packet length'.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Helin Zhang [Thu, 5 Jun 2014 05:09:09 +0000 (13:09 +0800)]
pci: access to specific bits via sysfs
Enabling 'Extended Tag' and resetting 'Max Read Request Size' in PCI
config space have big impacts to i40e performance. They cannot be
changed on some BIOS implementations, though can on others. Two sys
files of 'extended_tag' and 'max_read_request_size' are added to
support changing them by 'echo' in user space.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Heqing Zhu <heqing.zhu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Ouyang Changchun [Thu, 12 Jun 2014 07:10:05 +0000 (15:10 +0800)]
examples/vmdq: fix Tx queue id
This patch fixes a core id issue in sample vmdq, in case core mask
doesn't start with lcore_id 0 but 20, for instance,
queue id should use core_id instead of lcore_id.
Signed-off-by: Ouyang Changchun <changchun.ouyang@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Pablo de Lara [Tue, 10 Jun 2014 21:33:27 +0000 (22:33 +0100)]
ixgbe: fix link status interrupt of bypass device
Function ixgbe_get_media_type_82599 returns media_type =
ixgbe_media_type_unknown, when using an 82599 Bypass NIC,
so that causes link status interrupt not to work properly.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Ivan Boule [Thu, 12 Jun 2014 21:55:41 +0000 (23:55 +0200)]
ethdev: add Rx error counters for missed, badcrc and badlen packets
Split input error stats to have a better understanding of why packets
have been dropped.
Keep ierrors field untouched for backward compatibility.
Signed-off-by: Ivan Boule <ivan.boule@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:39 +0000 (19:08 +0100)]
app/test: packet framework unit tests
Unit tests for Packet Framework libraries.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:38 +0000 (19:08 +0100)]
examples/pipeline: packet framework sample
This Packet Framework sample application illustrates the capabilities
of the Intel DPDK Packet Framework toolbox.
It creates different functional blocks used by a typical IPv4 framework like:
flow classification, firewall, routing, etc.
CPU cores are connected together through standard interfaces built on SW rings,
which each CPU core running a separate pipeline instance.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:37 +0000 (19:08 +0100)]
app/pipeline: packet framework benchmark
This application is purposefully built to benchmark the performance
of the Intel DPDK Packet Framework toolbox.
It uses 3 CPU cores connected in a chain through SW rings
(NICs --> Core A --> Core B --> Core C --> NICs)
1. Core A: reads packets from NIC ports and writes them to SW queues;
2. Core B: instantiates a Packet Framework pipeline that uses ring reader
input ports, a table whose type is selected trhough command line arguments
(--none, --stub, --lpm, --acl, --hash[-spec]-KEYSZ-TYPE, with KEYSZ as
8, 16 or 32 bytes and TYPE as ext (Extendible bucket) or lru (LRU))
and ring writers output ports;
3. Core C: reads packets from SW rings and writes them to NIC ports.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
[Thomas: remove dedicated build option]
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:36 +0000 (19:08 +0100)]
cfgfile: library to interpret config files
This library provides a tool to interpret config files that have
standard structure.
It is used by the Packet Framework examples/ip_pipeline sample application.
It originates from examples/qos_sched sample application and now it makes
this code available as a library for other sample applications to use.
The code duplication with qos_sched sample app to be addressed later.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:35 +0000 (19:08 +0100)]
pipeline: new packet framework logic
The Packet Framework pipeline library provides a standard methodology
(logically similar to OpenFlow) for rapid development of complex packet
processing pipelines out of ports, tables and actions.
A pipeline is constructed by connecting its input ports to its output ports
through a chain of lookup tables. As result of lookup operation into the
current table, one of the table entries (or the default table entry, in case
of lookup miss) is identified to provide the actions to be executed on the
current packet and the associated action meta-data.
The behavior of user actions is defined through the configurable table action
handler, while the reserved actions define the next hop for the current packet
(either another table, an output port or packet drop) and are handled
transparently by the framework.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:33 +0000 (19:08 +0100)]
table: stub
The stub table is a simple implementation of the Packet Framework table
API that produces lookup miss for all input packets.
It is used as simple cable-type forwarder by the Packet Framework
pipeline library.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:32 +0000 (19:08 +0100)]
table: array
Packet Framework array tables.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:31 +0000 (19:08 +0100)]
table: hash
Various types of hash tables presented under the Packet Framework toolbox.
Hash table types:
1. Extendible bucket (ext): when bucket is full, bucket is extended with
more keys
2. Least Recently Used (LRU): when bucket is full, the LRU entry is discarded
3. Pre-computed key signature: RX core extracts the key n-tuple from the
packet, computes the key signature and saves the key and key signature
within the packet meta-data; flow classification core performs the actual
lookup (the bucket search stage) after reading the key and key signature
from packet meta-data
4. Signature computed on-the-fly (do-sig version): the same CPU core extracts
the key n-tuple from pkt, computes key signature and performs the table
lookup
5. Configurable key size or optimized for single key size (8-byte, 16-byte
and 32-byte key sizes)
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:30 +0000 (19:08 +0100)]
table: ACL
Packet Framework ACL table for ACL rule database.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:29 +0000 (19:08 +0100)]
table: LPM IPv6
Routing table for IPv6.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:28 +0000 (19:08 +0100)]
table: LPM IPv4
Routing table for IPv4.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:27 +0000 (19:08 +0100)]
table: new packet framework API
This file defines the operations to be implemented by
any Packet Framework table.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:25 +0000 (19:08 +0100)]
port: source and sink
Source port is a packet generator, similar to /dev/zero Linux device.
Sink port is a packet terminator (drops all input packets), similar
to /dev/null Linux device.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:24 +0000 (19:08 +0100)]
port: hierarchical scheduler
The QoS hierarchical scheduler presented as Packet Framework port.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:23 +0000 (19:08 +0100)]
port: IPv4 reassembly
The IPv4 reassembly operation is presented as a Packet Framework port.
The code duplication with examples/ip_reassembly sample application
to be addressed soon by linking the relevant library once upstreamed.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
[Thomas: update to new ip_frag library]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:22 +0000 (19:08 +0100)]
port: IPv4 fragmentation
This port presents the IPv4 fragmentation operation as a Packet Framework port.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
[Thomas: update to new ip_frag library]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:21 +0000 (19:08 +0100)]
port: ring
ring_reader input port (on top of single consumer rte_ring)
ring writer output port (on top of single producer rte_ring)
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:20 +0000 (19:08 +0100)]
port: ethdev
The input port ethdev_reader implements the Packet Framework port API
on top of the Intel DPDK poll mode driver for a NIC RX queue.
The output port ethdev_writer implements the Packet Framework port API
on top of the Intel DPDK poll mode driver for a NIC TX queue.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:19 +0000 (19:08 +0100)]
port: new packet framework API
This file defines the port operations that have to be implemented
by Packet Framework ports.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:17 +0000 (19:08 +0100)]
lpm: check rule existence
Added API function for LPM IPv4 and IPv6 to query for the existence
of a rule/route and return the next hop ID associated with the route
if route is present.
This is used by the Packet Framework LPM table for implementing a
routing table.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Cristian Dumitrescu [Wed, 4 Jun 2014 18:08:18 +0000 (19:08 +0100)]
mbuf: meta-data offset
Added zero-size field (offset in data structure) to specify the beginning
of packet meta-data in the packet buffer just after the mbuf.
The size of the packet meta-data is application specific and the packet
meta-data is managed by the application.
The packet meta-data should always be accessed through the provided macros.
This is used by the Packet Framework libraries (port, table, pipeline).
There is absolutely no performance impact due to this mbuf field, as it
does not take any space in the mbuf structure (zero-size field).
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Thomas Monjalon [Tue, 17 Jun 2014 00:31:30 +0000 (02:31 +0200)]
ip_frag: clean includes
Add required rte_byteorder in rte_ip_frag.h.
Remove useless includes in *.c files.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Thomas Monjalon [Mon, 16 Jun 2014 21:10:08 +0000 (23:10 +0200)]
examples/vhost: restrict log type namespace
RTE_LOGTYPE_CONFIG, RTE_LOGTYPE_DATA and RTE_LOGTYPE_PORT are renamed
by adding VHOST prefix.
It prevents from conflict with new RTE_LOGTYPE_PORT of packet framework.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Jingjing Wu [Mon, 16 Jun 2014 07:31:46 +0000 (15:31 +0800)]
app/testpmd: add commands for filters
add commands in testpmd for NIC filters:
add_ethertype_filter
remove_ethertype_filter
get_ethertype_filter
add_2tuple_filter
remove_2tuple_filter
get_2tuple_filter
add_5tuple_filter
remove_5tuple_filter
get_5tuple_filter
add_syn_filter
remove_syn_filter
get_syn_filter
add_flex_filter
remove_flex_filter
get_flex_filter
Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Jingjing Wu [Mon, 16 Jun 2014 07:31:45 +0000 (15:31 +0800)]
ixgbe: add filters
This patch adds following ixgbe NIC filters implement:
syn filter, ethertype filter, 5tuple filter for intel NIC 82599
Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Jingjing Wu [Mon, 16 Jun 2014 07:31:44 +0000 (15:31 +0800)]
igb: add filters
This patch adds following igb NIC filters implement:
syn filter, ethertype filter, 2tuple filter, flex filter for intel NIC 82580 and i350
syn filter, ethertype filter, 5tuple filter for intel NIC 82576
Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Jingjing Wu [Mon, 16 Jun 2014 07:31:43 +0000 (15:31 +0800)]
ethdev: add filters
This patch adds APIs for NIC filters list below:
ethertype filter, syn filter, 2tuple filter, flex filter, 5tuple filter
Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
Reviewed-by: Vladimir Medvedkin <medvedkinv@gmail.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Anatoly Burakov [Wed, 28 May 2014 17:32:47 +0000 (18:32 +0100)]
examples/ip_reassembly: overhaul
New stuff:
* Support for regular traffic as well as IPv4 and IPv6
* Simplified config
* Routing table printed out on start
* Uses LPM/LPM6 for lookup
* Unmatched traffic is sent to the originating port
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Anatoly Burakov [Wed, 28 May 2014 17:32:46 +0000 (18:32 +0100)]
ip_frag: add IPv6 reassembly
Mostly a copy-paste of IPv4, with a few caveats.
Only supported packets are those in which fragment extension header is
just after the IPv6 header.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Anatoly Burakov [Wed, 28 May 2014 17:32:45 +0000 (18:32 +0100)]
examples/ip_fragmentation: overhaul
New stuff:
* Support for regular traffic as well as IPv4 and IPv6
* Simplified config
* Routing table printed out on start
* Uses LPM/LPM6 for lookup
* Unmatched traffic is sent to the originating port
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Anatoly Burakov [Wed, 28 May 2014 17:32:44 +0000 (18:32 +0100)]
examples: rename ipv4_frag example to ip_fragmentation
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Anatoly Burakov [Wed, 28 May 2014 17:32:43 +0000 (18:32 +0100)]
ip_frag: add IPv6 fragmentation support
Mostly a copy-paste of IPv4.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Anatoly Burakov [Wed, 28 May 2014 17:32:42 +0000 (18:32 +0100)]
ip_frag: rename ipv4_fragmentation function
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Anatoly Burakov [Wed, 28 May 2014 17:32:41 +0000 (18:32 +0100)]
ip_frag: refactor reassembly code into a proper library
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Anatoly Burakov [Wed, 28 May 2014 17:32:40 +0000 (18:32 +0100)]
ip_frag: rename structures in fragmentation table
Technically, fragmentation table can work for both IPv4 and IPv6
packets, so we're renaming everything to be generic enough to make sense
in IPv6 context.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Anatoly Burakov [Wed, 28 May 2014 17:32:39 +0000 (18:32 +0100)]
ip_frag: remove unneeded check and macro
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
git.droids-corp.org / dpdk.git / log