devargs: fix freeing during device removal

After calling unplug function of a bus, the device is expected
to be freed. It is too late for getting devargs to remove.
Anyway, the buses which implement unplug are already freeing
the devargs, except the PCI bus.
So the call to rte_devargs_remove() is removed from EAL and
added in PCI.

Fixes: 2effa126fbd8 ("devargs: simplify parameters of removal function")

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

app/testpmd: set packet dump based on verbosity level

when changing verbosity level it will configure rx/tx callbacks to dump
packets based on the verbosity value as following:
    1- dump only received packets:
       testpmd> set verbose 1
    2- dump only sent packets:
       testpmd> set verbose 2
    3- dump sent and received packets:
       testpmd> set verbose (any number > 2)
    4- disable dump
       testpmd> set verbose 0

Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>

app/testpmd: add packet dump callbacks

add new rx/tx callback functions to be used for dumping the packets.

Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>

app/testpmd: move dumping packets to a separate function

verbosity for the received/sent packets is needed in all of the
forwarding engines so moving it to be in a separate function

Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>

app/testpmd: fix physical port socket initialization

Once the lcore list setting excluded the socket which physical device
attached, it will cause failure. Meanwhile, it will disable Testpmd
cross NUMA scenario.

Fixes: dbfb8ec7094c ("app/testpmd: optimize mbuf pool allocation")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

net/tap: fix reported number of Tx packets

When writev fails to send packets it doesn't update the
number of Tx packets, but it still num_tx is updated.

The value that should be returned is the actual number
of sent packets which is num_packets.

Fixes: 02f96a0a82d1 ("net/tap: add TUN/TAP device PMD")
CC: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>

net/ixgbe: remove mild profanity

At the tail end of comment about barriers (I feel your pain);
remove mild profanity.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/bnx2x: remove profanity

No need for profanity in comments.

Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

doc: clarify VLAN and QinQ Tx offload prerequisite

- Fix missing PKT_TX_VLAN mbuf.ol_flag and mbuf.vlan_tci
fields for Tx VLAN INSERT offload.

- Fix missing mbuf.vlan_tci_outer field for Tx QINQ INSERT offload.

- Rename deprecated PKT_TX_QINQ_PKT to PKT_TX_QINQ

Fixes: cba7f53b717d ("ethdev: introduce Tx queue offloads API")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

mbuf: fix missing Tx outer UDP checksum flag name

Fix missing Tx outer udp checksum flag name

Fixes: df694a05bfff ("ethdev: add Tx offload outer UDP checksum definition")

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

mbuf: fix offload flag name and list

Fix missing PKT_TX* & PKT_RX* ol_flag name and fix ol_flag list.

Fixes: 6d18505efaa6 ("vhost: support UDP Fragmentation Offload")
Fixes: 829a1c2c41dc ("mbuf: extend flow director field")
Fixes: 63c0d74daaa9 ("mbuf: add Tx side tunneling type")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/mlx5: fix build on Arm

On some ARM environment, the below compilation error will be seen

dpdk/drivers/net/mlx5/mlx5_flow_dv.c: In function
'flow_dv_translate_item_nvgre':
/tmp/dpdk/drivers/net/mlx5/mlx5_flow_dv.c:785:22: error: pointer targets
in initialization differ in signedness [-Werror=pointer-sign]
  const char *tni_v = nvgre_v->tni;

The reason for this error is that nvgre_v->tni is defined as byte array
in size of 3B. However the code in the function iterate till the 4B in
order to copy/set also the subsequent field after it (flow_id)

Fixing by pointing to this struct from a different pointer.

Fixes: fc2c498ccb94 ("net/mlx5: add Direct Verbs translate items")

Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>

vhost: enable postcopy protocol feature

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>

net/vhost: add parameter to enable postcopy

Introduce a new postcopy-support parameter to Vhost PMD that
passes the RTE_VHOST_USER_POSTCOPY_SUPPORT flag at vhost
device register time.

Flag should only be set if application does not prefault guest
memory using, for example, mlockall() syscall.

Default value is 0, meaning that postcopy support is disabled
unless specified explicitly.

Example to enable postcopy support for a given device:

--vdev 'net_vhost0,iface=/tmp/vhost-user1,postcopy-support=1'

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: restrict postcopy live-migration enablement

Postcopy live-migration feature requires the application to
not populate the guest memory. As the vhost library cannot
prevent the application to that (e.g. preventing the
application to call mlockall()), the feature is disabled by
default.

The application should only enable the feature if it does not
force the guest memory to be populated.

In case the user passes the RTE_VHOST_USER_POSTCOPY_SUPPORT
flag at registration but the feature was not compiled,
registration fails.

For the same reason, postcopy and dequeue zero copy features
are not compatible, so don't advertize postcopy support if
dequeue zero copy is requested.

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: support postcopy end request

The master sends this message before stopping handling
userfaults, so that the backend closes the userfaultfd.

The master waits for the slave to acknowledge the request
with an empty 64bits payload for synchronization purpose.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: send userfault range addresses back to Qemu

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: avoid useless VhostUserMemory copy

The VHOST_USER_SET_MEM_TABLE payload is copied when handled,
whereas it could directly be referenced.

This is not very important, but next, we'll need to update the
payload and send it back to Qemu.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>

vhost: register new regions with userfaultfd

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: support postcopy listen message

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: introduce postcopy advise message

This patch opens a userfaultfd and sends it back to Qemu's
VHOST_USER_POSTCOPY_ADVISE request.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: add config flag for postcopy

Postcopy live-migration features relies on userfaultfd,
which was only introduced in kernel v4.3.

This patch introduces a new define to allow building vhost
library on kernels not supporting userfaultfd.

With legacy build system, user has to explicitly set
CONFIG_RTE_LIBRTE_VHOST_POSTCOPY to 'y'.

With Meson build system, RTE_LIBRTE_VHOST_POSTCOPY gets
automatically defined if userfaultfd kernel header is
present.

Suggested-by: Ilya Maximets <i.maximets@samsung.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>

vhost: enable fds passing in vhost-user messages

Passing userfault fds to Qemu will be required for postcopy
live-migration feature.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: pass socket fd to message handling callbacks

This is not used for now, but will be needed for the
special handling of VHOST_USER_SET_MEM_TABLE message
once postcopy will be supported.

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: add number of fds to vhost-user messages

As soon as some ancillary data (fds) are received, it is copied
without checking its length.

This patch adds the number of fds received to the message,
which is set in read_vhost_message().

This is preliminary work to support sending fds to Qemu.

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: define postcopy protocol flag

Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: fix error handling when mem table gets updated

When the memory table gets updated, the rings addresses need
to be translated again. If it fails, we need to exit cleanly
by unmapping memory regions.

Fixes: d5022533c20a ("vhost: retranslate vring addr when memory table changes")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>

vhost: fix payload size of reply

QEMU doesn't expect any payload for the reply of
VHOST_USER_SET_LOG_BASE request, so don't send any.
Note that the Vhost-user specification isn't clear about
it and would need to be fixed.

Fixes: 54f9e32305d4 ("vhost: handle dirty pages logging request")
Cc: stable@dpdk.org
Reported-by: Ilya Maximets <i.maximets@samsung.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>

vhost: clarify reply-ack in case a reply was already sent

For messages that require a reply, a second ack should not be
sent when reply-ack protocol feature is negotiated, even if
the corresponding flag is set in the message.

The code is compliant with the spec but it isn't clear it is,
so this patch adds a comment to make it explicit.

Suggested-by: Ilya Maximets <i.maximets@samsung.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: fix return code of messages requiring replies

VHOST_USER_GET_PROTOCOL_FEATURES, VHOST_USER_GET_VRING_BASE
and VHOST_USER_SET_LOG_BASE require replies, so their handlers
should return VH_RESULT_REPLY, not VH_RESULT_OK.

Fixes: 0bff510b5ea6 ("vhost: unify message handling function signature")

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>

vhost: fix messages results handling

Return of message handling has now changed to an enum that can
take non-negative value that is not zero in case a reply is
needed. But the code checking the variable afterwards has not
been updated, leading to success messages handling being
treated as errors.

External post and pre callbacks return type needs also to be
changed to the new enum, so that its handling is consistent.
This is done in this patch alongside with the convertion of
its only user, vhost-crypto backend.

Fixes: 0bff510b5ea6 ("vhost: unify message handling function signature")

Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: add doxygen comment to vDPA header

As APIs in rte_vdpa.h are public, we need to add doxygen comments
to all APIs and structures.

Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>

vhost: fix notification for packed ring

The notification can't be disabled in packed ring when
application tries to disable notification, because the
device event flags field is overwritten by an unexpected
value. This patch fixes this issue.

Fixes: b1cce26af1dc ("vhost: add notification for packed ring")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>

net/mlx5: rewrite MAC address by E-Switch

Offload following modify MAC address actions to E-Switch
via TC-Flower driver

- RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
- RTE_FLOW_ACTION_TYPE_SET_MAC_DST

The corresponding rte_flow_item_eth must be present in
rte_flow pattern

Only support modify outer layer MAC address

The example testpmd command is:

    flow create 0 transfer ingress
         pattern eth / ipv4 / udp dst is 7000 / end
         actions set_mac_dst mac_addr dd:00:aa:11:bb:33 /
         set_mac_src mac_addr bb:00:cc:11:aa:22 /
 port_id id 1 / end

Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>

app/testpmd: add commands to modify MAC address

add commands to support following actions:

- RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
- RTE_FLOW_ACTION_TYPE_SET_MAC_DST

Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>

ethdev: add generic MAC address rewrite actions

rte_flow actions:
- RTE_FLOW_ACTION_TYPE_SET_MAC_SRC
- RTE_FLOW_ACTION_TYPE_SET_MAC_DST
added in order to offload to NIC

The rte_flow_itme_eth must be present in rte_flow pattern

Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>

net/mlx5: rewrite TTL by E-Switch

Offload following modify TTL actions to E-Switch via
TC-Flower driver

- RTE_FLOW_ACTION_TYPE_SET_TTL
- RTE_FLOW_ACTION_TYPE_DEC_TTL

The corresponding IP protocol rte_flow_item_ipv[4|6]
must be present in rte_flow pattern otherwith PMD
return error

The example testpmd commands are:

    flow create 0 transfer ingress
         pattern eth / ipv4 / udp dst is 7000 / end
 actions dec_ttl /
 port_id id 1 / end

    flow create 0 transfer ingress
         pattern eth / ipv4 / udp dst is 7001 / end
 actions set_ttl ttl_value 10 /
 port_id id 1 / end

Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>

app/testpmd: add commands to modify TTL

add commands which supports following TTL actions:
- RTE_FLOW_ACTION_TYPE_DEC_TTL
- RTE_FLOW_ACTION_TYPE_SET_TTL

Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>

ethdev: add generic TTL rewrite actions

rewrite TTL by decrease or just set it directly
it's not necessary to check if the final result
is zero or not

This is slightly different from the one defined
by openflow and more generic

Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>

ethdev: add field for device data per process

Primary and secondary processes share a per-device private data. With
current design it is not possible to have data per-device per-process.
This is required for handling properly the CPP interface inside the NFP
PMD with multiprocess support.

There is also at least another PMD driver, tap, with similar
requirements for per-process device data.

Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

doc: add ixgbe known issue with legacy interrrupt

When using uio_pci_generic module or using legacy interrupt mode of
igb_uio or vfio, X550 cannot get interrupts. Because the Interrupt
Status bit is not implemented, then the irq cannot be handled correctly
and cannot report the event fd to DPDK apps.

Add this hw limitation and details into ixgbe known issue.

Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>

net/cxgbe: add action to swap MAC addresses

Implement RTE_FLOW_ACTION_TYPE_MAC_SWAP to offload flows with
action to swap the source and destination MAC addresses in the
outermost Ethernet header.

Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>

net/ark: support updated hardware and Tx meta data

Support for version 2 of DDM hardware and user tx meta data.
Verify version during initialization.

Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>

net/ark: remove useless hardware notifications

Only send notification to mpu when crossing 64 index boundary.

Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>

net/ark: add recovery for lack of mbufs

Attempt to allocate smaller chunk of mbufs when larger amount is
not available.  Report error when small chunk not available.

Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>

app/testpmd: fix vdev socket initialization

The cmdline settings of port-numa-config and rxring-numa-config have
been flushed by the following init_config. If we don't configure the
port-numa-config, the virtual device will allocate the device ports to
socket 0. It will cause failure when the socket 0 is unavailable.

eg:
testpmd -l <cores from socket 1> --vdev net_pcap0,iface=lo
--socket-mem=64 -- --numa --port-numa-config="(0,1)"
--ring-numa-config="(0,1,1),(0,2,1)" -i

...
Configuring Port 0 (socket 0)
Failed to setup RX queue:No mempool allocation on the socket 0
EAL: Error - exiting with code: 1
  Cause: Start ports failed

Fix by allocate the devices port to the first available socket or the
socket configured in port-numa-config.

Fixes: 487f9a592a27 ("app/testpmd: fix NUMA structures initialization")
Fixes: 20a0286fd2c0 ("app/testpmd: check socket id validity")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/qede: remove invalid config option checks

Now that logging of initialization is controlled by dynamic debug
level, remove the #ifdef for RTE_LIBRTE_QEDE_DEBUG_INIT since that
config option does not exist in common_base and is not documented.

Fixes: 69b6573980c1 ("net/qede: implement dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

doc: remove invalid config options from liquidio guide

The config options for init and debug driver were replaced by
dynamic log levels.

Fixes: 70e28c612d65 ("net/liquidio: implement dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

doc: remove invalid config option from ena guide

The ena driver has used dynamic log type to enable init debugging since
18.05 but the documentation still has leftover mention of the config
option.

Fixes: 8bc0acae970d ("net/ena: implement dynamic logging")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/avf: fix build with debug enabled

DEBUG_DUMP_DESC flag is enabled/disabled from Makefile and enabling it
causing the build issue.

Add the missed 'volatile' keyword to avoid the warning for type
mismatch, which will be treated as compiler error if WERROR_FLAGS
is enabled.

Fixes: bfd38e4d708b ("net/avf: fix missing compiler error flags")
CC: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

net/mlx5: fix build with zero-size array

If the build environment doesn't have 'linux/tc_act/tc_pedit.h' header,
compiler will use needed structs defined in mlx5_flow_tcf.c.

However, there is a zero-size array defined in one struct and
ISO C forbids this when -Wpedantic is set by debug mode.

Simply put __extension__ keyword before the struct in question.

Fixes: 2ed2fe5f0a9c ("net/mlx5: rewrite IP address UDP/TCP port by E-Switch")

Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>

net/mlx5: support multiple groups and jump action

rte_flow has 'group' attribute and 'jump' action in order to support
multiple groups. This feature is known as multi-table support ('chain' in
linux TC flower) in general because a group means a table of flows. Example
commands are:

flow create 0 transfer priority 1 ingress
     pattern eth / vlan vid is 100 / end
     actions jump group 1 / end

flow create 0 transfer priority 1 ingress
     pattern eth / vlan vid is 200 / end
     actions jump group 2 / end

flow create 0 transfer group 1 priority 2 ingress
     pattern eth / vlan vid is 100 /
           ipv4 dst spec 192.168.40.0 dst prefix 24 / end
     actions drop / end

flow create 0 transfer group 1 priority 2 ingress
     pattern end
     actions of_pop_vlan / port_id id 1 / end

flow create 0 transfer group 2 priority 2 ingress
     pattern eth / vlan vid is 200 /
           ipv4 dst spec 192.168.40.0 dst prefix 24 / end
     actions of_pop_vlan / port_id id 2 / end

flow create 0 transfer group 2 priority 2 ingress
     pattern end
     actions port_id id 2 / end

With theses flows, if a packet having vlan 200 and src_ip as 192.168.40.1,
this packet will firstly hit the 1st flow. Then it will hit the 5th flow
because of the 'jump' action. As a result, the packet will be forwarded to
port 2 (VF representor) with vlan tag being stripped off. If the packet had
vlan 100 instead, it would be dropped by the 3rd flow.

Signed-off-by: Yongseok Koh <yskoh@mellanox.com>

net/atlantic: add release notes

Release notes for Aquantia atlantic driver.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: read MAC registers for debug purposes

This patch add support for dumping MAC registers.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: implement EEPROM get/set

Add support for EEPROM reading/writing.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: implement VLAN filters and offloads

VLAN filters and VLAN offloads implementation.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: implement MTU configuration

Add support for updating MTU value.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: implement MAC address manipulations

Add support for adding/removing MAC addresses.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: add flow control configuration

Add support for flow control feature.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: implement RSS and RETA manipulation API

Add support for Receive Side Scaling feature.
RSS hash and reta table configuration.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: implement promisc and allmulti modes

Add support for promiscuous/allmulticast modes configuration.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: add Rx/Tx descriptors information

Add support for Rx/Tx descriptors status information.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: implement device statistics

Add support for device stats, xstats and queue stats

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: add link status and interrupt management

Implement link interrupt, link info, link polling.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: implement Tx path

Add implementation for TX datapath.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: implement Rx path

Add implementation for RX datapath.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: implement core logic for Tx/Rx

Add RX/TX function prototypes for further datapath development.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: configure device start/stop

Start, stop and reset are all done via hw_atl layer.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: add b0 hardware layer

This is hw_atl logic layer derived from linux atlantic
driver. It contains RX/TX hardware initialization
sequences, various hw configuration.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: implement firmware operations

AQC NICs comes in fields with two major
FW generations: 1x and 3x.

This is part of linux atlantic driver shared code,
responsible for internal NIC firmware interactions,
including link management ops, FW initialization,
various lifecycle features.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: add hardware access layer

This patch introduces hw_atl layer which is maintained
in sync with linux kernel driver.
It will generally be in sync with linux upstream.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: add hardware registers access routines

Add implementation for hardware registers access routines.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: add logging structure

Implement logging macroses for debug purposes.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/atlantic: add PMD driver skeleton

Makefile/meson build infrastructure, atl_ethdev minimal skeleton,
header with aquantia aQtion NIC device and vendor IDs.

Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>

net/enic: fix counter action

- track whether counter DMAs are active or not so they can be stopped if
  needed before DMA memory is freed
- fix counter DMA shut-down by changing vnic_dev_counter_dma_cfg() to
  take the number of counters to DMA instead of high counter index and
  use num counters = 0 to shut off DMAs
- remove unnecessary checks that DMA counter memory is valid and that
  counter DMAs are in use
- change the minimum DMA period to match what 1400 series adapter is
  capable of
- fix comments and change a couple variable names to make more sense

Fixes: 86df6c4e2fce ("net/enic: support flow counter action")

Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>

common/qat: fix failure to create PMD

If QAT crypto pmd failed to be created due to reaching MAX
cryptodevs it prevented QAT comp PMD being created. And vice versa.
Change to warning in these cases and allow the other PMD to be created.

Fixes: c0c90bc4cade ("compress/qat: add create and destroy functions")
Cc: stable@dpdk.org
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Cel <tomaszx.cel@intel.com>

cryptodev: fix library version

This patch fixes the cryptodev library version number that was
missed updating in DPDK 18.08.

Fixes: a4493be5bdfa ("cryptodev: replace bus specific struct with generic dev")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

test/crypto: add CAAM JR validation cases

This patch adds the validation test cases for
CAAM JR driver

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Akhil Goyal <akhil.goyal@nxp.com>

doc: add CAAM JR guide

add caam jr driver details, supported features and algorithms
in the document.

release note and MAINTAINERS are also updated.

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/caam_jr: add security offload

This patch provides the support for protocol offload
to the hardware. following security operations are
added:
 - session_create
 - session_destroy
 - capabilities_get

Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/caam_jr: add statistics operations

This patch adds the following statistics operations:
 - stats_get
 - stats_reset

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/caam_jr: add scatter gather

This patch add the scatter gather feature
for auth-only, cipher-only and cipher-auth
operations

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/caam_jr: add enqueue/dequeue operations

This patch add support for :
1. creating run time sec hw decriptors for a given request.
2. enqueue operation to the caam jr ring
3. dequeue operation from the caam jr ring in poll mode
4. creating a crypto protocol descriptor for session - first time.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/caam_jr: add device cababilities

add device capabilities for supported algorithms,
key length etc.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/caam_jr: add session configuration methods

This patch add support to create session configuration
of various types i.e. cipher, auth and aead etc.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/caam_jr: add queue pair config

add following ops for configuring queues
 - queue_pair_setup
 - queue_pair_release
 - queue_pair_count

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/caam_jr: add device basic operations

This patch adds following device operations
 - dev_configure
 - dev_start
 - dev_stop
 - dev_close
 - dev_infos_get

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/caam_jr: add basic job ring routines

This patch adds following job ring routines
 - init_job_ring (configure hw/sw resources)
 - shutdown_job_ring (releases hw/sw resources)
 - close_job_ring (flush job ring)

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/caam_jr: add UIO specific operations

caam_jr need support from kernel caam driver for
job ring initialisation. So to access register space
for job ring and allow re configure and map to userspace
UIO interface is used. This also allows to handle the
caam interrupts from the user space.

This patch adds UIO specific operations

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/caam_jr: add routines to configure HW

This patch add routines for configuring the hw
to support various features.
These routines will be used by the PMD ops.
The patch also defines structure and macros used
to access hw capabilities.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/caam_jr: add HW tuning options

caam_jr hardware can be tuned for multiple settings
like ring depth, coalescing, notification types, cache
size etc.

These parameter can be used for performance tuning
for various platforms.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/caam_jr: introduce basic driver

The caam_jr poll mode crypto driver is supported for
NXP SEC 4.x+ (CAAM) hardware accelerator.
This driver is by default supported on LE platforms,
if it is used on BE platforms like LS104X,
config option CONFIG_RTE_LIBRTE_PMD_CAAM_JR_BE can be
enabled.

This patch add skeleton for caam jobring driver
with probe and uintialisation functions

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/aesni_mb: support AES-GCM algorithm

This patch updates the current AESNI-MB PMD with added AES-GCM
algorithm support. The patch includes the necessary changes
to the code including the capability update, control and data
patch changes for the AES-GCM algorithm support.

Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>

common/qat: support GEN3 devices

This adds pci detection, queue-pair configuration and
documentation for Intel GEN3 QuickAssist devices.

Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>

crypto/qat: support AES-CMAC

This patch add AES-CMAC support. CMAC is a keyed hash function
that is based on a symmetric key block cipher. It is One-Key
CBC MAC improvement over XCBC-MAC. RFC 4493. NIST SP 800-38B.

Signed-off-by: Tomasz Cel <tomaszx.cel@intel.com>
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>

cryptodev: fix pool element size for undefined operation

The documentation of rte_crypto_op_pool_create indicates that
specifying RTE_CRYPTO_OP_TYPE_UNDEFINED would create a pool that
supports all operation types. This change makes the code
consistent with documentation.

Fixes: c0f87eb5252b ("cryptodev: change burst API to be crypto op oriented")
Cc: stable@dpdk.org
Signed-off-by: Junxiao Shi <git@mail1.yoursunny.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

event/dpaa2: support crypto adapter

event dpaa2 device support both ethernet as well as
crypto queues to be attached to it. eth_rx_adapter
provide infrastructure to attach ethernet queues and
crypto_adapter provide support for crypto queues.

This patch add support for dpaa2_eventdev to attach
dpaa2_sec queues.

Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Abhinandan Gujjar <abhinandan.gujjar@intel.com>

crypto/dpaa2_sec: support atomic queues

Queues attached to event crypto device can be
parallel, atomic and ordered.
This patch add support for atomic queues processing
for dpaa2_sec queues.

Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>

crypto/dpaa2_sec: support event crypto adapter

dpaa2_sec hw queues can be attached to a hw dpaa2 event
device and the application can configure the event
crypto adapter to access the dpaa2_sec packets using
hardware events.
This patch defines APIs which can be used by the dpaa2
event device to attach/detach dpaa2_sec queues.

Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>

crypto/zuc: enable meson build

Added new meson.build file for ZUC

Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>